Hi Mark,
Thanks.. Sorry,I had to change my email address because it wasn't working i don't know what happen...
So, it means that it shoukd work with the port 9203?... I still don't understand it...
What happen when you tried it at your lab? port 9203 unreacheable, isn't it? how can I make kannel listen to 9203 port??? or what do I need?
if you find anything, let me know please...
Thanks in advance,
Garl.
_____________________________________________________________________
OK,
>From the FAQ :
4.8 What standard WAP protocol ports will Kannel listen to?
Kannel supports connection oriented mode and connectionless mode which means
it will only listen to the ports 9200 and 9201. When new features from the
protocol are added that uses other ports Kannel will ofcourse use the
standard ports for this.
Mark
-----Original Message-----
From: Pate Mark-marpate1 [mailto:[EMAIL PROTECTED]]
Sent: 15 October 2002 11:55
To: [EMAIL PROTECTED]
Subject: RE: Configuration - IDEN PD
Hi Garl,
I've just tried 9203 in our lab and this is not working either.
lsof | grep 902[0-8] shows that only ports 9200 and 9201 are being listened
to by bearerbox.
tcpdump shows that port 9203 is unreachable.
I haven't seen anything in the documentation that will limit bearerbox to
these two ports either. If I find something, I'll let you know.
Cheers,
Mark
-----Original Message-----
From: Garl Mansilla [mailto:[EMAIL PROTECTED]]
Sent: 15 October 2002 11:04
To: [EMAIL PROTECTED]
Subject: RE: Configuration - IDEN PD
HI Pate,
I'll try changing the port in the device... but it's not the point,
because iden device is working with 9203! (as ivone said)... so i woould
like to have a litle more information about kannel using 9203 port.
Thanks in advance,
Garl
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos, & more
faith.yahoo.com
