Manuel, did you get your problem's solved?
I ran into similar issues (missing dll's ) which I resolved by going back to the cygwin install and carefully selecting any of the things that might have something to do with the application. I don't recall the exact changes I made however I can assure you that there are a few things in the "default" cygwin install that you will need. In general it seemed that things to do with "development" were not always included in the base cygwin install. Once you do have all the cygwin parts installed it all runs fine. BTW I compiled the released sources rather than trying to run the older binaries. The make also ran without any hitch. Just to be complete I also ran the Windows update utility (before the cygwin update) and downloaded the recommended Windows Upgrades. (I doubt that it had anything to do with the solution. I'm just being complete in documenting what I did). ============================ Now my question for you.... Do you plan to use a modem or will you be making a TCP/IP based connection to your SMSC? The problem is that Windows does not support virtual COM ports and I haven't seen any cygwin drivers to make /dev/xxx out of the Windows Modems. Please let me know if you have faced this problem. thanks, David -----Original Message----- From: [EMAIL PROTECTED] [mailto:users-admin@;kannel.3glab.org]On Behalf Of Manuel Villalta Villalta Sent: jeudi 24 octobre 2002 17:34 To: users Subject: cygxml2-2.dll libraries I'm trying to run kannel on Windows NT, but when I startup the bearerbox it says that the cygxml2-2.dll library isn't in the system. I have installend the cyngwin software. Does anyone known how to solve it? Regards
