Hi all, I've managed to send wap configuration messages to siemens C55 and S55 mobiles, but there are a few things i haven't been able to figure out.
The actual message is this: //PP Ap;B2.0;C0;DSiemens;Ec40023f17bead205;F1;Ggsm_csd;I0031123456789;Lusername;Mpassword;O0000;Ppin;Thttp://wap.home.page; The //PP is the identifier, i have no clue what PP might stand for and siemens is not very willing to give out information on this (in fact when i called siemens in holland they didn't even seem to know what wap was, how's that for costumer support :-/). Anyway, the fields are identified by by alphabet characters. i haven't been able to figure out any of them but the most obvious. D is the profile name. E is actually several parts. They're all hexidecimals, i haven't figured out the first 2 yet, it's either c400 (50176) or c4 (196) and 0. The second part, 23f1, is the port number (9201). The third part is the ip address of the gateway, 1 hexidecimal for each field (7bead205 would be 123.234.210.5). I obviously is the dial up number. L and M are the username and password for the dial up. P is the 'pincode' (password) needed to activate the settings. T is the homepage. Certain things like the pincode are optional. I had some problems with the G field, but this can be left out as well. Apparantly it defaults to gsm anyway. If this is sent the connection type is ISDN, which is a bit of a problem for me, so my question is how do i set it as analog? Greets, Roger Danse
