Aarno
On Tuesday, June 24, 2003, at 01:25 PM, Jeetendra Singh wrote:
I hope somebody out there can help me...
�
I have following WAP PUSH data with me
�
7C User Data Length (124 bytes)
06 User Data Header Length (6 bytes)
05 UDH Item Element id (Port Numbers)
04 UDH IE length (4 bytes)
0B84 destination port number
23F0 origin port number
01 Transaction ID (Push ID)
06 PDU Type (Push PDU)
15 Header Length (21 bytes)
AE Content Type=application/vnd.wap.sic (0x80 | 0x2E)
96 Host, WAP - 230, Appendix A, table 39 (wsp)
6C 6F 63 61 6C 68 6F 73 74 3A 38 30 38 30 localhost:8080
....
....
....
01 <indication element end>
01 <SI element end>
Please confirm whether my understanding (as explained below)�of encoding in UCP PDU for above message is right.
�
In UCP PDU, UDH field in XSER shall contain following part
�
06 User Data Header Length (6 bytes)
05 UDH Item Element id (Port Numbers)
04 UDH IE length (4 bytes)
0B84 destination port number
23F0 origin port number
whereas the rest�goes�in TMsg field with�MT=4.
�
Here the DCS value shall be 245 (0xF5) or�21 (0x15) i.e. 8 bit binary data with message class=1. (although I read somewhere that DCS value will be 0x04 (8 bit binary).
�
Any help is most welcome.
thanks and best regards,
JS
�
----- Original Message -----
From: Jeetendra Singh
To: [EMAIL PROTECTED]
Sent: Tuesday, June 24, 2003 10:47 AM
Subject: WAP Push
Can somebody provide me example of WAP PUSH (SI and SL) messages as they are encoded in UCP/SMPP/CIMD2 PDU's?
Thanks in advance for any help.
-JS
