Not sure, but check /dev/ttyS1 and see that it's good. What are you running kannel on (cygwin/linux/solaris)? ----- Original Message ----- From: "mikez" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 24, 2003 12:08 PM Subject: Re: nokia 30 setup
> I changed at2 ==> at > > 2003-11-24 18:21:46 [0] INFO: Debug_lvl = 1, log_file = <none>, log_lvl = 0 > 2003-11-24 18:21:46 [0] WARNING: DLR: using default 'internal' for storage > type. > 2003-11-24 18:21:46 [0] INFO: DLR using storage type: internal > 2003-11-24 18:21:46 [0] INFO: Added logfile > `/var/log/gateway/newgateway.log' with level `0'. > 2003-11-24 18:21:46 [0] INFO: Started access logfile > `/var/log/newgateway/access.log'. > 2003-11-24 18:21:46 [0] INFO: HTTP: Opening server at port 13000. > 2003-11-24 18:21:46 [0] INFO: AT2[/dev/ttyS1]: configuration shows modemtype > <nokiaphone> > 2003-11-24 18:21:46 [0] INFO: AT2[/dev/ttyS1]: read modem definition for > <Nokia Phone> > 2003-11-24 18:21:46 [0] INFO: ---------------------------------------- > 2003-11-24 18:21:46 [0] INFO: Kannel bearerbox II version cvs-20031122 > starting > 2003-11-24 18:21:46 [0] ERROR: fopen failed: couldn't open > `/var/log/newgateway/gateway.store' > 2003-11-24 18:21:46 [0] ERROR: System error 2: No such file or directory > 2003-11-24 18:21:46 [0] ERROR: fopen failed: couldn't open > `/var/log/newgateway/gateway.store.new' > 2003-11-24 18:21:46 [0] ERROR: System error 2: No such file or directory > 2003-11-24 18:21:46 [0] ERROR: fopen failed: couldn't open > `/var/log/newgateway/gateway.store.bak' > 2003-11-24 18:21:46 [0] ERROR: System error 2: No such file or directory > 2003-11-24 18:21:46 [0] INFO: Cannot open any store file, starting new one > 2003-11-24 18:21:46 [0] INFO: MAIN: Start-up done, entering mainloop > 2003-11-24 18:21:46 [7] INFO: AT2[/dev/ttyS1]: opening device > 2003-11-24 18:21:46 [7] ERROR: AT2[/dev/ttyS1]: at_data_link: fail to set > termios attribute > 2003-11-24 18:21:46 [7] ERROR: System error 5: Input/output error > 2003-11-24 18:21:48 [7] INFO: AT2[/dev/ttyS1]: init device > 2003-11-24 18:21:48 [7] ERROR: AT2[/dev/ttyS1]: at_data_link: fail to set > termios attribute > 2003-11-24 18:21:48 [7] ERROR: System error 5: Input/output error > 2003-11-24 18:21:48 [7] INFO: AT2[/dev/ttyS1]: speed set to 38400 > 2003-11-24 18:21:48 [7] ERROR: AT2[/dev/ttyS1]: Couldnot write to device. > 2003-11-24 18:21:48 [7] ERROR: System error 5: Input/output error > 2003-11-24 18:21:52 [7] ERROR: AT2[/dev/ttyS1]: Couldnot write to device. > 2003-11-24 18:21:52 [7] ERROR: System error 5: Input/output error > 2003-11-24 18:21:56 [7] ERROR: AT2[/dev/ttyS1]: no answer from modem > 2003-11-24 18:21:56 [7] ERROR: AT2[/dev/ttyS1]: Opening failed. Terminating > 2003-11-24 18:21:56 [7] INFO: AT2[/dev/ttyS1]: opening device > 2003-11-24 18:21:56 [7] ERROR: AT2[/dev/ttyS1]: at_data_link: fail to set > termios attribute > 2003-11-24 18:21:56 [7] ERROR: System error 5: Input/output error > 2003-11-24 18:21:57 [7] INFO: AT2[/dev/ttyS1]: init device > 2003-11-24 18:21:57 [7] ERROR: AT2[/dev/ttyS1]: at_data_link: fail to set > termios attribute > 2003-11-24 18:21:57 [7] ERROR: System error 5: Input/output error > 2003-11-24 18:21:57 [7] INFO: AT2[/dev/ttyS1]: speed set to 38400 > 2003-11-24 18:21:57 [7] ERROR: AT2[/dev/ttyS1]: Couldnot write to device. > 2003-11-24 18:21:57 [7] ERROR: System error 5: Input/output error > 2003-11-24 18:22:01 [7] ERROR: AT2[/dev/ttyS1]: Couldnot write to device. > 2003-11-24 18:22:01 [7] ERROR: System error 5: Input/output error > 2003-11-24 18:22:05 [7] ERROR: AT2[/dev/ttyS1]: no answer from modem > 2003-11-24 18:22:05 [7] ERROR: AT2[/dev/ttyS1]: Opening failed. Terminating > 2003-11-24 18:22:05 [7] INFO: AT2[/dev/ttyS1]: opening device > 2003-11-24 18:22:05 [7] ERROR: AT2[/dev/ttyS1]: at_data_link: fail to set > termios attribute > 2003-11-24 18:22:05 [7] ERROR: System error 5: Input/output error > 2003-11-24 18:22:06 [7] INFO: AT2[/dev/ttyS1]: init device > 2003-11-24 18:22:06 [7] ERROR: AT2[/dev/ttyS1]: at_data_link: fail to set > termios attribute > 2003-11-24 18:22:06 [7] ERROR: System error 5: Input/output error > 2003-11-24 18:22:06 [7] INFO: AT2[/dev/ttyS1]: speed set to 38400 > 2003-11-24 18:22:06 [7] ERROR: AT2[/dev/ttyS1]: Couldnot write to device. > 2003-11-24 18:22:06 [7] ERROR: System error 5: Input/output error > > > > Zohar writes: > > > At some point 'at2' was abandoned for 'at' > > http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#AEN4382 > > > > ----- Original Message ----- > > From: "mikez" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, November 24, 2003 11:53 AM > > Subject: nokia 30 setup > > > > > >> how can I resolve this error? > >> > >> I'm using nokia 30 modem > >> > >> 2003-11-24 18:04:20 [0] INFO: Debug_lvl = 1, log_file = <none>, log_lvl = > > 0 > >> 2003-11-24 18:04:20 [0] WARNING: DLR: using default 'internal' for storage > >> type. > >> 2003-11-24 18:04:20 [0] INFO: DLR using storage type: internal > >> 2003-11-24 18:04:20 [0] INFO: Added logfile > >> `/var/log/gateway/newgateway.log' with level `0'. > >> 2003-11-24 18:04:21 [0] INFO: Started access logfile > >> `/var/log/newgateway/access.log'. > >> 2003-11-24 18:04:21 [0] INFO: HTTP: Opening server at port 13000. > >> 2003-11-24 18:04:21 [0] ERROR: Unknown SMSC type 'at2' > >> 2003-11-24 18:04:21 [0] ERROR: Failed to create Smsc wrapper > >> 2003-11-24 18:04:21 [0] PANIC: Cannot start with SMSC connection failing > >> 2003-11-24 18:04:21 [0] PANIC: ./bearerbox [0x80a7ab3] > >> 2003-11-24 18:04:21 [0] PANIC: ./bearerbox [0x80501b9] > >> 2003-11-24 18:04:21 [0] PANIC: ./bearerbox(vfprintf+0x815) [0x804aead] > >> 2003-11-24 18:04:21 [0] PANIC: ./bearerbox(vfprintf+0xe0d) [0x804b4a5] > >> 2003-11-24 18:04:21 [0] PANIC: ./bearerbox(vfprintf+0x126e) [0x804b906] > >> 2003-11-24 18:04:21 [0] PANIC: /lib/tls/libc.so.6(__libc_start_main+0xf0) > >> [0x856750] > >> 2003-11-24 18:04:21 [0] PANIC: ./bearerbox(SSL_write+0x41) [0x804ac89] > >> > >> > >> > > >
