Problem seems to be your push control document. Can you
send it to me ?
Aarno
On 17.1.2005, at 07:07, Chandrasegaram Jeyakumaran wrote:
Hi,
Thank you very much for the reply.
yes I tried it (what you have mentioned). but the problem is
in the wap box console it says
DEBUG: PPG: too early to push the message, waiting
DEBUG: PPG: send_push_response: telling pi
DEBUG: HTTP: Resetting HTTPClient for `127.0.0.1'.
INFO: PPG: handle_push_message: push message accepted for processing
DEBUG: HTTP: Destroying HTTPClient area 0x81b3720.
DEBUG: HTTP: Destroying HTTPClient for `127.0.0.1'.
But there is no indication that it is sent to the simulator.
I am bit confused whether my pushkannel.conf configuration is wrong.
Could you please give me a appropriate configuration file if you can?
Thanks in advance,
Regards,
Jeyakumaran
On Fri, 2005-01-14 at 18:48, Aarno Syv�nen wrote:
You just send usual ppg document. But remember use ip address, and csd
bearer.
Aarno
On 13.1.2005, at 12:04, Chandrasegaram Jeyakumaran wrote:
Hi all,
I am new to kannel. I wanted to set up a push proxy gateway and test.
I have done the configuration part as ppg running it seems.
I want push messages to a nokia emulator(Whatever) without an smsc.
How can I push message to an emulator using kannel ppg . The emulator
is
running in the local machine and the ppg too.
Can you please give me the guide lines please. I went through the
userguide. There is way saying. But it is not adequate it seems.
Could you please help me?
Thanks in advance .
Regards,
Jeyakumaran.
--
Jeyakumaran Chandrasegaram, Software Engineer
BeyondM (PVT) Ltd (a hSenid Company)
Telephone+94-11-2625695 Mobile: +94-776-244290 Web: www.hsenid.com
YahooID: jkumaranc
mobilizing your enterprise
**** DISCLAIMER ***** This e-mail and any attachments there to are
intended for the sole use of the recipient(s) named above and may
contain information that is confidential and/or proprietary to the
hSenid Software International (Pvt.) Ltd. Any use of the information
contained herein (including, but not limited to, total or partial
reproduction, communication, or dissemination in any form) by persons
other than the intended recipient(s) is prohibited. If you have
received
this e-mail in error, please notify the sender immediately and delete
it.
