Hello, Yes, it sends sms via phone.
regards, Martynas > Hi, > > Have you tried to send an sms via the sim card in a phone? Does that > work? > > Cheers, > > Gareth > > V wrote: >> Hello, >> >> I try to use siemens tc35 modem for sending/recieving sms. >> The last lines of debug log are: >> >> -------------------- >> 005-05-18 15:22:42 [11796] [6] DEBUG: AT2[modemtc35]: --> AT+CSMS=?^M >> 2005-05-18 15:22:42 [11796] [6] DEBUG: AT2[modemtc35]: <-- +CSMS: (0,1) >> 2005-05-18 15:22:42 [11796] [6] DEBUG: AT2[modemtc35]: <-- OK >> 2005-05-18 15:22:42 [11796] [6] INFO: AT2[modemtc35]: Phase 2+ is >> supported >> 2005-05-18 15:22:42 [11796] [6] DEBUG: AT2[modemtc35]: --> AT+CSMS=1^M >> 2005-05-18 15:22:42 [11796] [6] DEBUG: AT2[modemtc35]: <-- +CSMS: 1,1,1 >> 2005-05-18 15:22:42 [11796] [6] DEBUG: AT2[modemtc35]: <-- OK >> 2005-05-18 15:22:42 [11796] [6] DEBUG: AT2[modemtc35]: --> >> AT+CNMI=1,2,0,1,1^M >> 2005-05-18 15:22:42 [11796] [6] DEBUG: AT2[modemtc35]: <-- OK >> 2005-05-18 15:22:42 [11796] [6] INFO: AT2[modemtc35]: AT SMSC >> successfully >> opened. >> ---------------------- >> >> So, device is opened. But when I try to send sms through kannel, I get >> these errors: >> >> --------------------- >> 2005-05-18 15:23:00 [11815] [13] DEBUG: boxc_receiver: sms received >> 2005-05-18 15:23:00 [11815] [13] DEBUG: send_msg: sending msg to box: >> <127.0.0.1> >> 2005-05-18 15:23:02 [11796] [6] DEBUG: AT2[modemtc35]: >> TP-Validity-Period: >> 24.0 hours >> 2005-05-18 15:23:02 [11796] [6] DEBUG: AT2[modemtc35]: --> AT+CMGS=25^M >> 2005-05-18 15:23:02 [11796] [6] DEBUG: AT2[modemtc35]: <-- > >> 2005-05-18 15:23:02 [11796] [6] DEBUG: AT2[modemtc35]: send command >> status: 1 >> 2005-05-18 15:23:02 [11796] [6] DEBUG: AT2[modemtc35]: --> >> 0011000B819762120242F00000A70C6276182466874162763806 >> 2005-05-18 15:23:02 [11796] [6] DEBUG: AT2[modemtc35]: --> ^Z >> 2005-05-18 15:23:05 [11796] [6] DEBUG: AT2[modemtc35]: <-- > >> 2005-05-18 15:23:05 [11796] [6] DEBUG: AT2[modemtc35]: <-- ERROR >> 2005-05-18 15:23:05 [11796] [6] ERROR: AT2[modemtc35]: Error occurs: >> ERROR >> (error number not known to us. ask google and add it.) >> 2005-05-18 15:23:05 [11796] [6] DEBUG: AT2[modemtc35]: send command >> status: -1 >> 2005-05-18 15:23:05 [11796] [6] DEBUG: AT2[modemtc35]: --> AT+CMGS=25^M >> 2005-05-18 15:23:05 [11796] [6] DEBUG: AT2[modemtc35]: <-- > >> 2005-05-18 15:23:05 [11796] [6] DEBUG: AT2[modemtc35]: send command >> status: 1 >> 2005-05-18 15:23:05 [11796] [6] DEBUG: AT2[modemtc35]: --> >> 0011000B819762120242F00000A70C6276182466874162763806 >> 2005-05-18 15:23:06 [11796] [6] DEBUG: AT2[modemtc35]: --> ^Z >> 2005-05-18 15:23:10 [11796] [6] DEBUG: AT2[modemtc35]: <-- > >> 2005-05-18 15:23:10 [11796] [6] DEBUG: AT2[modemtc35]: <-- ERROR >> 2005-05-18 15:23:10 [11796] [6] ERROR: AT2[modemtc35]: Error occurs: >> ERROR >> (error number not known to us. ask google and add it.) >> 2005-05-18 15:23:10 [11796] [6] DEBUG: AT2[modemtc35]: send command >> status: -1 >> 2005-05-18 15:23:10 [11796] [6] DEBUG: AT2[modemtc35]: --> AT+CMGS=25^M >> 2005-05-18 15:23:10 [11796] [6] DEBUG: AT2[modemtc35]: <-- > >> 2005-05-18 15:23:10 [11796] [6] DEBUG: AT2[modemtc35]: send command >> status: 1 >> 2005-05-18 15:23:10 [11796] [6] DEBUG: AT2[modemtc35]: --> >> 0011000B819762120242F00000A70C6276182466874162763806 >> 2005-05-18 15:23:10 [11796] [6] DEBUG: AT2[modemtc35]: --> ^Z >> 2005-05-18 15:23:14 [11796] [6] DEBUG: AT2[modemtc35]: <-- > >> 2005-05-18 15:23:14 [11796] [6] DEBUG: AT2[modemtc35]: <-- ERROR >> 2005-05-18 15:23:14 [11796] [6] ERROR: AT2[modemtc35]: Error occurs: >> ERROR >> (error number not known to us. ask google and add it.) >> 2005-05-18 15:23:14 [11796] [6] DEBUG: AT2[modemtc35]: send command >> status: -1 >> --------------------------- >> >> my config is: >> >> --------------------- >> group = smsc >> smsc = at >> smsc-id = modemtc35 >> modemtype = siemens_tc35 >> device = /dev/ttyS0 >> speed = 9600 >> pin = 1111 >> my-number = "+711111111111" >> sms-center = "+711111111112" >> >> group = modems >> id = siemens_tc35 >> name = "Siemens TC35" >> detect-string = "SIEMENS" >> detect-string2 = "TC35" >> init-string = "AT+CNMI=1,2,0,1,1" >> speed = 9600 >> enable-hwhs = "AT\\Q3" >> need-sleep = true >> >> >> Could anybody help me to resolve this problem? >> >> THANK YOU! >> >> regards, >> Martynas >> >> >> >> >
