Try with the following at smsc group and forget about the receiver channel:
transceiver-mode=true On Friday 20 May 2005 08:50, Sasko Celakovski wrote: > Thank you Rodrigo for your prompt reply... > The problem remains with the 1.4.0 version as well. > The thing is that it all works fine and then just > blocks the transmitter channel. I have separate > receiver and transmiter on the same smsc connection. > Kannel conects as a receiver and as a transmiter on > the same port. The receiver (Kannel receives and SMSC > sends - that is transmitter on the SMSC and receiver4 > on Kannel) work fine and the other direction blocks. > So I assume that the TCP is fine... Kannel enters a > reconection loop for that channel while keeps > receiveing messages and calls the appropriate services > for them. The problem is that it can not send reply > messages to teh SMSC... > Please let me know if you have any othwer ideas for > solving the problem... > > Kindest Regards, > Sasko Celakvoski > > --- Rodrigo Cremaschi > > <[EMAIL PROTECTED]> wrote: > > Hi Sasko, > > > > As a first advise, I would sugest you to try > > Kannel 1.4.0. > > Second, try to telnet the server manually. If > > you get a prompt, then the > > TCP connection is fine. > > > > >telnet 172.20.3.105 3704 > > > > If you dont, check your routes, firewall rules, > > etc. which may be > > preventing the connection. > > > > Best Regards, > > Rodrigo. > > > > ----- Original Message ----- > > From: "Sasko Celakovski" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Thursday, May 19, 2005 6:34 AM > > Subject: connection problem > > > > > Hi, > > > I have a problem using Kannel 1.3.1 connected on > > > > SMSC > > > > > as transmiter and receiver (on the same SMPP > > > > address > > > > > and port). Sometimes the TX channel stacks (the > > > connection for sending messages from Kannel to the > > > SMSC that is the RX connection on the SMSC) while > > > > the > > > > > other channel works fine. I'm receiving messages > > > > from > > > > > the SMSC but can not send any messages. The > > > > bearerbox > > > > > reports the problem and enters the reconnection > > > sequence while the SMSC does not reports anything > > > > in > > > > > the debugs. These are the messages that I receive > > > > in > > > > > the bearerbox.log: > > > > > > 2005-05-17 00:42:53 [7] ERROR: SMPP[smsc1a]: I/O > > > > error > > > > > or other error. Re-connecting. > > > 2005-05-17 00:42:53 [6] ERROR: SMPP[smsc1a]: I/O > > > > error > > > > > or other error. Re-connecting. > > > 2005-05-17 00:42:53 [7] ERROR: connect failed > > > 2005-05-17 00:42:53 [7] ERROR: System error 111: > > > Connection refused > > > 2005-05-17 00:42:53 [7] ERROR: error connecting to > > > server `172.20.3.105' at port `3704' > > > 2005-05-17 00:42:53 [6] ERROR: connect failed > > > 2005-05-17 00:42:53 [6] ERROR: System error 111: > > > Connection refused > > > 2005-05-17 00:42:53 [7] ERROR: SMPP[smsc1a]: > > > > Couldn't > > > > > connect to server. > > > 2005-05-17 00:42:53 [6] ERROR: error connecting to > > > server `172.20.3.105' at port `3704' > > > 2005-05-17 00:42:53 [7] ERROR: SMPP[smsc1a]: > > > > Couldn't > > > > > connect to SMS center (retrying in 30 seconds). > > > 2005-05-17 00:42:53 [6] ERROR: SMPP[smsc1a]: > > > > Couldn't > > > > > connect to server. > > > 2005-05-17 00:42:53 [6] ERROR: SMPP[smsc1a]: > > > > Couldn't > > > > > connect to SMS center (retrying in 30 seconds). > > > > > > Please let me know if anyone had the same > > > > experience > > > > > or any ideas how can I solve the problem... > > > > > > Kind Regards, > > > Sasko > > > > > > __________________________________________________ > > > Do You Yahoo!? > > > Tired of spam? Yahoo! Mail has the best spam > > > > protection around > > > > > http://mail.yahoo.com > > __________________________________ > Yahoo! Mail Mobile > Take Yahoo! Mail with you! Check email on your mobile phone. > http://mobile.yahoo.com/learn/mail
