George, You can:
1. Set enable-hwhs = ""... or enable-hwhs="AT"... This might or might not work but it's worth a try. 2. Look up the correct setting at the Nokia AT Guide. You can find it at the Nokia website. 3. Change the SIM cards of the 9110 & 9220 :) Rene Kluwen Chimit > Hi & thnx for feedback that did help for Nokia 9210 > For Nokia 9110 seems the same doesnt work which is the prefered and free > device that I can use for inbound traffic. > > Any clues from below what could be the problem? > > 005-08-12 17:55:33 [30126] [6] INFO: AT2[nokia_smsc]: init device > 2005-08-12 17:55:33 [30126] [6] INFO: AT2[nokia_smsc]: speed set to 19200 > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: --> ATZ^M > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: <-- OK > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: --> AT^M > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: <-- AT > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: <-- OK > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: --> AT&F^M > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: <-- AT&F > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: <-- OK > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: --> ATE0^M > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: <-- ATE0 > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: <-- OK > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: --> AT+IFC=2,2^M > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: <-- ERROR > 2005-08-12 17:55:33 [30126] [6] INFO: AT2[nokia_smsc]: cannot enable > hardware handshake > 2005-08-12 17:55:33 [30126] [6] DEBUG: AT2[nokia_smsc]: --> > AT+CSCA="+31881000"^M > 2005-08-12 17:55:34 [30126] [6] DEBUG: AT2[nokia_smsc]: <-- OK > 2005-08-12 17:55:34 [30126] [6] DEBUG: AT2[nokia_smsc]: --> AT+CMGF=0^M > 2005-08-12 17:55:34 [30126] [6] DEBUG: AT2[nokia_smsc]: <-- ERROR > 2005-08-12 17:55:34 [30126] [6] ERROR: AT2[nokia_smsc]: Opening failed. > Terminating > 2005-08-12 17:55:34 [30126] [6] INFO: AT2[nokia_smsc]: closing device > 2005-08-12 17:55:34 [30126] [6] INFO: AT2[nokia_smsc]: opening device > 2005-08-12 17:55:34 [30126] [6] DEBUG: AT2[nokia_smsc]: device opened > 2005-08-12 17:55:34 [30126] [6] DEBUG: AT2[nokia_smsc]: device opened > > > group = smsc > smsc-id = nokia_smsc > smsc = "at" > #pin = "1234" > modemtype = "9110" > device = "/dev/ttyS0" > speed = 19200 port > validityperiod = 167 > keepalive = 60 > sms-center = "+3100001000" > > group = modems > id = 9110 > name = "Nokia 9110/9210" > detect-string = Nokia > no-pin = true > init-string = "AT+CNMI=0,0,0,0,0" > keepalive-cmd = "AT+CBC;+CSQ" > enable-hwhs = "AT\\Q3" > > > Thanks > George > > ----- Original Message ----- > From: "Wilfried Goesgens" <[EMAIL PROTECTED]> > To: <users@kannel.org> > Sent: Friday, August 12, 2005 1:49 PM > Subject: Re: Nokia 9110/ 9210 kannel.conf info needed > > >> On Thu, Aug 11, 2005 at 11:04:28PM +0200, George C wrote: >>> re: cannot enable hardware handshake >>> >>> Hello, >>> >>> Anyone have some feedback with what I may need to configure .conf >>> with >>> to >>> eliminate this error with 9210? >>> >>> 2005-08-11 20:47:31 [14478] [6] INFO: AT2[nokia_smsc]: init device >>> 2005-08-11 20:47:31 [14478] [6] INFO: AT2[nokia_smsc]: speed set to >>> 19200 >>> 2005-08-11 20:47:31 [14478] [6] DEBUG: AT2[nokia_smsc]: --> ATZ^M >>> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- OK >>> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: --> AT^M >>> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- AT >>> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- OK >>> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: --> AT&F^M >>> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- AT&F >>> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- OK >>> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: --> ATE0^M >>> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- ATE0 >>> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- OK >>> 2005-08-11 20:47:32 [14478] [6] DEBUG: AT2[nokia_smsc]: --> >>> AT+IFC=2,2^M >>> 2005-08-11 20:47:33 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- ERROR >>> 2005-08-11 20:47:33 [14478] [6] INFO: AT2[nokia_smsc]: cannot enable >>> hardware handshake >>> 2005-08-11 20:47:33 [14478] [6] DEBUG: AT2[nokia_smsc]: --> >>> AT+CPIN?^M >>> 2005-08-11 20:47:33 [14478] [6] DEBUG: AT2[nokia_smsc]: <-- ERROR >>> 2005-08-11 20:47:33 [14478] [6] ERROR: AT2[nokia_smsc]: Opening >>> failed. >> seems as if your communicator doesn't support entering the pin via at >> interface. >> you shoult set no-pin to true in the modem definition. >>> Terminating >>> 2005-08-11 20:47:33 [14478] [6] INFO: AT2[nokia_smsc]: closing >>> device >>> 2005-08-11 20:47:33 [14478] [6] INFO: AT2[nokia_smsc]: opening >>> device >>> 2005-08-11 20:47:33 [14478] [6] DEBUG: AT2[nokia_smsc]: device >>> opened >>> 2005-08-11 20:47:33 [14478] [6] DEBUG: AT2[nokia_smsc]: device >>> opened >>> >>> # SMSC CONNECTIONS >>> >>> group = smsc >>> smsc-id = nokia_smsc >>> smsc = "at" >>> modemtype = "9110" >>> device = "/dev/ttyS0" >>> speed = 19200 port >>> validityperiod = 167 >>> keepalive = 60 >>> sms-center = "+31881000" >>> >>> group = modems >>> id = 9110 >>> name = "Nokia 9110/9210" >>> detect-string = Nokia >>> init-string = "AT+CNMI=0,0,0,0,0" >>> >>> Regards >>> George >>> >>> >>> ----- Original Message ----- >>> From: [1]George C >>> To: [EMAIL PROTECTED] >>> Sent: Thursday, August 11, 2005 11:03 PM >>> Subject: Nokia 911/ 9210 kannel.conf info needed >>> Hello, >>> >>> Will anyway have handy the kannel.conf information for using as >>> SMSc >>> /GSM modem the Nokia 9110 or 9210 communicator? >>> >>> Thank you & greatly appreciate it. >>> >>> George C >>> >>> >>> References >>> >>> Visible links >>> 1. [EMAIL PROTECTED] >>> mailto:[EMAIL PROTECTED] >>> 2. users@kannel.org >>> mailto:users@kannel.org >> >> -- >> > > > >