Hi Rashmi
rash_s13 schrieb:
I want to know the editing that should be done to the conf file for detecting
a mobile connected to USB port so that any message sent to it is displayed
on the running smsbox.
you have to set the
device parameter in group = smsc
to the USB port that is used by your mobile phone. Usually their are
assigned by hotplugd, looking similar to this: /dev/ttyUSB[x], where [x]
is a assigned number (like /dev/ttyUSB0).
Perhaps this can help you to - I've written a small script to maintain
the /dev/ttyUSB[x] addresses for several modems. This might help you to
get the device address
The subject was:
"small bash script to assign USB devices by physical USB port"
Hth,
Lars-Hendrik
--
**********************************************
terrestris Till Adams & Hinrich Paulsen GbR
Lars-Hendrik Schneider
Diplom-Geograph
Siemensstr. 8
D-53121 Bonn
Telefon: +49 (0)228 - 962 899 51
Fax: +49 (0)228 - 962 899 57
E-Mail: [EMAIL PROTECTED]
Internet: http://www.terrestris.de
**********************************************
