Thank you, Stipe Tolj. Should it help if I will use maximal_error_count parameter from smsc group and reset-string from modems group to resolve my problem? Could you please explain to me how to get exactly 1.4.1RC version of Kannel from CVS?
-----Original Message----- From: Stipe Tolj <[EMAIL PROTECTED]> To: Евгений Сидоров<[EMAIL PROTECTED]> Date: Sat, 10 Jun 2006 01:39:26 +0200 Subject: Re: GSM modem stop working after 1000 sms > > Евгений Сидоров wrote: > > > Hi folks! > > I have Kannel 1.4.0. installed on my Linux FC3 and Siemens TC35 GSM modem > > connected to COM port. When I send bulk sms, modem usually stop working > > after near about 1000 sms. I should reconnect modem to COM port and it > > start working again and continue to send sms. Does anybody heard about this > > problem? May be I should do some changes in kannel.conf? Any suggestion > > will help! > > This is the part of my kannel.conf: > > I'd suggest the following approach: > > 1. update to Kannel cvs (it's a 1.4.1RC); 1.4.0 is too old > 2. update Siemens firmware > > if you still experience this behaviour, then we "may" have a problem here. > But > from my experience with Siemens M20 GSM modems, Siemens has some issues on > "high" load, so I'd almost be willing to say "It's not a Kannel issue, but > rather a GSM modem failure". > > Stipe > > ------------------------------------------------------------------- > K?lner Landstrasse 419 > 40589 D?sseldorf, NRW, Germany > > tolj.org system architecture Kannel Software Foundation (KSF) > http://www.tolj.org/ http://www.kannel.org/ > > mailto:st_{at}_tolj.org mailto:stolj_{at}_kannel.org > ------------------------------------------------------------------- >
