looks like the autodetect of speed isn't working..wouldn't be the first time....and you need to set the speed. why don't you use minicom and do the AT commands to it manually, and find the right speed etc... Then you may have some base to start with for configuring kannel to run it.
----- Original Message ----- From: "John Lauck" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, September 15, 2006 2:09 AM Subject: Re: smsc connection and modem feedback with kannel > I checked the device at /dev/ttyS0 and it's accessed type changes once > the bearerbox starts, but never again. > > Shouldn't I get more than AT2[gc83]: --> ^M ? > Does anyone know what AT2[gc83]: --> ^M means? > > If i change from /dev/ttyS0 to /dev/ttyS1 it errors, so something must > be working with the current setup. > > Could it be bad init strings? If anyone has the AT command set for the > GC83 I'm interested in researching it. > > I also tried the GC83 firmware update, but had the same results. > > John Lauck wrote: > > I'm having trouble connecting to my smsc (sony ericsson gc83 pcmcia > > card). It's mounted at /dev/ttyS0 according to dmesg, so I know it's > > there. > > > > I also know the card and sim work. It works in the sony ericsson windows > > software without any problems for sending and receiving sms. > > > > > > I keep tweaking the kannel.conf but haven't gotten much feedback from > > the modem. > > > > A snippet of my kannel.conf is below. > > > > Kannel status shows: > > > > gc83 AT2[gc83] (connecting, rcvd 0, sent 0, failed 0, queued 0 msgs) > > > > My smsc.log shows: > > > > 2006-09-13 11:18:54 [3510] [6] DEBUG: AT2[gc83]: detecting modem speed. > > 2006-09-13 11:18:54 [3510] [6] INFO: AT2[gc83]: opening device > > 2006-09-13 11:18:54 [3510] [6] DEBUG: AT2[gc83]: device opened > > 2006-09-13 11:18:55 [3510] [6] DEBUG: AT2[gc83]: device opened > > 2006-09-13 11:18:55 [3510] [6] INFO: AT2[gc83]: speed set to 115200 > > 2006-09-13 11:18:55 [3510] [6] DEBUG: AT2[gc83]: --> ^M > > 2006-09-13 11:21:40 [3566] [6] INFO: AT2[gc83]: trying to use speed > > <9600> from modem definition > > 2006-09-13 11:21:40 [3566] [6] INFO: AT2[gc83]: opening device > > 2006-09-13 11:21:40 [3566] [6] DEBUG: AT2[gc83]: device opened > > 2006-09-13 11:21:40 [3566] [6] DEBUG: AT2[gc83]: device opened > > 2006-09-13 11:21:40 [3566] [6] INFO: AT2[gc83]: speed set to 9600 > > 2006-09-13 11:21:40 [3566] [6] DEBUG: AT2[gc83]: --> ^M > > 2006-09-13 11:23:01 [3588] [6] INFO: AT2[gc83]: trying to use speed > > <9600> from modem definition > > 2006-09-13 11:23:01 [3588] [6] INFO: AT2[gc83]: opening device > > 2006-09-13 11:23:01 [3588] [6] DEBUG: AT2[gc83]: device opened > > 2006-09-13 11:23:01 [3588] [6] DEBUG: AT2[gc83]: device opened > > 2006-09-13 11:23:01 [3588] [6] INFO: AT2[gc83]: speed set to 9600 > > 2006-09-13 11:23:01 [3588] [6] DEBUG: AT2[gc83]: --> ^M > > > > > > kannel.conf: > > # SMSC CONNECTIONS > > group = smsc > > smsc = at > > smsc-id = gc83 > > port = 10000 > > connect-allow-ip = "127.0.0.1;10.80.4.*" > > modemtype = auto > > device = /dev/ttyS0 > > #preferred-smsc-id = gc83 > > #allowed-smsc-id = gc83 > > log-file = "/var/log/kannel/smsc.log" > > log-level = 0 > > keepalive = 5 > > > > group = modems > > #broken = true > > detect-string = "gc83" > > #detect-string2 = "ericsson" > > name = "Ericsson GC83" > > id = gc83 > > #init-string = "abcdefghijklmnopqrstuvwxyz" > > #speed = 19200 > > #init-string = "AT+CFUN=1+CNMI=2,2,0,1,1" > > #reset-string = "AT+CFUN=1" > > #need-sleep = true > > #enable-mms = true > > #init-string = "AT+CNMI=3,3" > > #keepalive-cmd = "AT+CBC;+CSQ" > > > > # SMSBOX SETUP > > group = smsbox > > bearerbox-host = localhost > > sendsms-port = 13013 > > global-sender = 1234567890 > > access-log = "/var/log/kannel/access.log" > > log-file = "/var/log/kannel/smsbox.log" > > log-level = 0 > > sendsms-chars = "0123456789 " > > reply-couldnotfetch = "You did something right and something wrong" > > reply-emptymessage = "You shouldn't get empty messages" > > http-request-retry = 0 > > > > > > > >
