Hi,
try flow-control = 0
flow-control number This SMSC can support two types of flow control. The
first type of flow control is a stop-and-wait protocol, when this parameter
equals to '1'. During the handling of commands, no other commands shall be sent
before the a response is received. Any command that is sent before the
reception of the response will be discarded. The second type of flow control is
windowing, when this parameter is unset or equals '0'. In this case a maximum
of n commands can be sent before a response is received.
regards
Vincent
--
Telemaque - 06560 SOPHIA-ANTIPOLIS - (FR)
Service Technique/Reseau - NOC
Developpement SMS/MMS/Kiosques
http://www.telemaque.fr/
[EMAIL PROTECTED]
Tel : +33 4 92 90 99 84 (fax 9142)
----- Original Message -----
From: Huber, Gottfried
To: [email protected]
Sent: Friday, December 15, 2006 4:15 PM
Subject: SMSn FAILED
Hallo together
many SMS sent by kannel are returned FAILED from the provider.
the smsc-operator says that the "windows-time" is set to 10 for sending
asyncron.
I thought that kannel is sending Syncron (submit, response, submit, response,
... usw) ?
i have set the param: throughput number=10
is there a way to configure kannel in this way ?
best regards
gottfried huber
