Hi Fourat, in general i use the following lines for wavecom modem
note i use kermit to preset the pin and the sms-center before to start the bearerbox include = "/etc/kannel/seik.modems.conf" # SMSC GSM group = smsc smsc = at smsc-id = modem0 denied-smsc-id = clickatell modemtype = wavecom device = /dev/ttyS0 validityperiod = 167 sim-buffering = true sms-center = +35989100000 in the /etc/kannel/seik.modems.conf i have for wavecom these settings : group = modems id = wavecom name = Wavecom detect-string = "WAVECOM" #AT+CGSN #IMEI: 332055336044120 #OK #AT+CNMI=? #+CNMI: (0-3),(0-3),(0-3),(0-2),(0,1) #init-string ="AT+CNMI=1,3,2,2,1" #init-string ="AT+CNMI=2,1,0,0,0" init-string ="AT+CNMI=2,2,0,0,0" speed = 9600 # enable-hwhs = "AT\\Q3" #message-storage = "MT" #enable-mms = true keepalive-cmd = "AT+CBC;+CSQ" On Mon, Dec 18, 2006 at 09:17:09PM +0100, Fourat Zouari wrote: > Hello all, > Something strange with kannel, i've configured it for my WAVECOM 1213A > GSM modem this way : > --------------------- > ... > group = modems > id = WAVECOM > name = wavecom > detect-string = WAVECOM > init-string = "AT+CNMI=2,2,0,0,0;+CMEE=1" > need-sleep = true > sendline-sleep = 6000 > no-pin = true > ... > group = smsc > smsc-id = MODEM-01 > smsc = at > modemtype = WAVECOM > device = /dev/ttyS0 > speed = 9600 > log-file = "/var/log/smgs/modem.log" > log-level = 0 > --------------------- > When kannel is started, no modem.log is created, and on the bearerbox > log, all is working except that there's no "wavecom" in the log... > Seems just if kannel didnt read the config to go and intiate the modem > :( > The same config is working on an SMSC, just added those two groups and > a serial linked new modem. > Any one can help ? thanks
