okay, so i found out i needed to have transceiver-mode on in order to
receive dlr's now, i'm getting this error:
2007-04-05 08:41:22 [6888] [6] WARNING: DLR[internal]: DLR for
DST<61424261976> not found.
2007-04-05 08:41:22 [6888] [6] ERROR: SMPP[0001]: got DLR but could not
find message or was not interested in it id<1528835378> dst<(null)>,
type<4>
i found this message in the archive:
http://www.mail-archive.com/[email protected]/msg05388.html
which says i need to set msg-id-type. i read the user guide about
msg-id-type:
"Optional, specifies which number base the SMSC is using for the message
ID numbers in the corresponding submit_sm_resp and deliver_sm PDUs. This
is required to make delivery reports (DLR) work on SMSC that behave
differently. The number is a combined set of bit 1 and bit 2 that indicate
as follows: bit 1: type for submit_sm_resp, bit 2: type for deliver_sm. If
the bit is set then the value is in hex otherwise in decimal number base.
Which means the following combinations are possible and valid: 0x00
deliver_sm decimal, submit_sm_resp decimal; 0x01 deliver_sm decimal,
submit_sm_resp hex; 0x02 deliver_sm hex, submit_sm_resp decimal; 0x03
deliver_sm hex, submit_sm_resp hex. In accordance to the SMPP v3.4 specs
the default will be a C string literal if no of the above values is
explicitly indicated using the config directive."
urrr ... pardon my spanish but que? i have absolutely not idea what this
means.
cheers
iain
