Hi Alejandro, I did it also with minicom but the modem seems not to respond to AT commands at all. I mean, that pretty strange... it seems like the modem does not start the AT interface...
Julien Alejandro Guerrieri ha scritto: > Try opening the port with minicom and closing without resetting just > after launching Kannel. I don't know why, but Kannel seems to have > problems initializing the modem for the first time and that may fix > it. > > Regards, > > Alejandro > > On 6/1/07, Julien Buratto <[EMAIL PROTECTED]> wrote: >> Hi all, >> >> I'm trying a new modem usb. >> When I plugit into my linux box, I get from kernel: >> Jun 1 14:43:37 db kernel: cdc_acm 4-1:1.0: ttyACM0: USB ACM device >> >> If I set this tty to kannel.conf and launch kannel, I get in the logs: >> >> 2007-06-01 14:46:24 [5106] [7] INFO: AT2[Modem_TEST]: opening device >> 2007-06-01 14:46:24 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened >> 2007-06-01 14:46:25 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened >> 2007-06-01 14:46:25 [5106] [7] INFO: AT2[Modem_TEST]: speed set to 57600 >> 2007-06-01 14:46:25 [5106] [7] DEBUG: AT2[Modem_TEST]: --> ^M >> 2007-06-01 14:46:27 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M >> 2007-06-01 14:46:31 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M >> 2007-06-01 14:46:35 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M >> 2007-06-01 14:46:39 [5106] [7] INFO: AT2[Modem_TEST]: closing device >> 2007-06-01 14:46:39 [5106] [7] INFO: AT2[Modem_TEST]: opening device >> 2007-06-01 14:46:39 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened >> 2007-06-01 14:46:40 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened >> 2007-06-01 14:46:40 [5106] [7] INFO: AT2[Modem_TEST]: speed set to 38400 >> 2007-06-01 14:46:40 [5106] [7] DEBUG: AT2[Modem_TEST]: --> ^M >> 2007-06-01 14:46:42 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M >> 2007-06-01 14:46:46 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M >> 2007-06-01 14:46:50 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M >> 2007-06-01 14:46:54 [5106] [7] INFO: AT2[Modem_TEST]: closing device >> 2007-06-01 14:46:54 [5106] [7] INFO: AT2[Modem_TEST]: opening device >> 2007-06-01 14:46:54 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened >> 2007-06-01 14:46:55 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened >> 2007-06-01 14:46:55 [5106] [7] INFO: AT2[Modem_TEST]: speed set to 19200 >> >> My configuration for that modem is: >> group = smsc >> smsc = at >> smsc-id = Modem_TEST >> max-error-count = 10 >> device = /dev/ttyACM0 >> pin = 0000 >> keepalive = 60 >> >> Any ideas ? Is there a way I can emulate a serial port for that modem ? >> >> Thanks >> >> > >
