Seems like the permissions for /dev/ttyUSB0 are wrong for your user. Fix the permissions and it should be ok.
Hope it helps, Alejandro On 6/13/07, ilja <[EMAIL PROTECTED]> wrote:
i don't know what to do!?! because i get error "AT2[/dev/ttyUSB0]: at2_device_thread: open_at2_device failed. " and "ERROR: System error 13: Permission denied" i have Nokia 6210 phone with USB cable the device is ttyUSB0 !!! see my logfile messages messages log Jun 13 21:10:14 noname kernel: usb 1-2: new full speed USB device using uhci_hcd and address 7 Jun 13 21:10:15 noname kernel: usb 1-2: configuration #1 chosen from 1 choice Jun 13 21:10:15 noname kernel: pl2303 1-2:1.0: pl2303 converter detected Jun 13 21:10:15 noname kernel: usb 1-2: pl2303 converter now attached to ttyUSB0 my kannel.conf group = core admin-port = 13000 smsbox-port = 13001 admin-password = bar status-password = foo #admin-deny-ip = "" #admin-allow-ip = "" #log-file = "/var/log/kannel.log" #log-level = 0 log-file = "/var/log/kannel/bearerbox.log" log-level = 0 box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" unified-prefix = "00358,0" #access-log = "access.log" #store-file = " kannel.store" #ssl-certkey-file = "mycertandprivkeyfile.pem" # SMSC CONNECTIONS # #group = smsc #smsc = fake #smsc-id = FAKE #port = 10000 #connect-allow-ip = 127.0.0.1 #GSM modem #This driver allows a GSM Modem or Phone to be connected to Kannel and work as a virtual SMSC group = smsc smsc = at modemtype = nokiaphone #device = /dev/ttyS0 device = /dev/ttyUSB0 speed = 115200 #speed = 9600 #pin = 2345 connect-allow-ip = 127.0.0.1 include=/usr/share/doc/kannel/examples/modems.conf # SMSBOX SETUP group = smsbox bearerbox-host = localhost sendsms-port = 13013 global-sender = 13013 sendsms-chars = "0123456789 +-" log-file = "/var/log/kannel/smsbox.log" log-level = 0 access-log = "/var/log/kannel/access.log" # SEND-SMS USERS group = sendsms-user username = tester password = foobar #user-deny-ip = "" #user-allow-ip = "" # this sender is for Kannel relay testing (http_smsc) group = sendsms-user username = bar password = foo user-deny-ip = "*.*.*.*" user-allow-ip = "127.0.0.1" # SERVICES group = sms-service keyword = nop text = "You asked nothing and I did it!" # this service is for Kannel relay testing, when this Kannel # works as relay gateway group = sms-service keyword = relay get-url = "http://localhost:15130/sms?user=bar&pass=foo&from=%p&to=%P&text=% r" max-messages = 0 # there should be default always group = sms-service keyword = default text = "No service specified" bearerbox.log 2007-06-13 21:28:23 [9316] [0] INFO: Added logfile `/var/log/kannel/bearerbox.log' with level `0'. 2007-06-13 21:28:23 [9316] [0] INFO: HTTP: Opening server at port 13000. 2007-06-13 21:28:23 [9316] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller) 2007-06-13 21:28:23 [9316] [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread) 2007-06-13 21:28:23 [9316] [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run) 2007-06-13 21:28:23 [9316] [0] DEBUG: starting smsbox connection module 2007-06-13 21:28:23 [9316] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2007-06-13 21:28:23 [9316] [0] DEBUG: Started thread 4 (gw/bb_boxc.c:sms_to_smsboxes) 2007-06-13 21:28:23 [9316] [0] DEBUG: Started thread 5 (gw/bb_boxc.c:smsboxc_run) 2007-06-13 21:28:23 [9316] [0] INFO: Set SMS resend frequency to 60 seconds. 2007-06-13 21:28:23 [9316] [0] INFO: SMS resend retry set to unlimited. 2007-06-13 21:28:23 [9316] [0] INFO: DLR rerouting for smsc id <(null)> disabled. 2007-06-13 21:28:23 [9316] [0] INFO: AT2[/dev/ttyUSB0]: configuration shows modemtype <nokiaphone> 2007-06-13 21:28:23 [9316] [0] DEBUG: AT2[/dev/ttyUSB0]: Reading modem definitions from </etc/kannel/kannel.conf> 2007-06-13 21:28:23 [9316] [0] DEBUG: Loading include file `/usr/share/doc/kannel/examples/modems.conf' (on line 62 of file /etc/kannel/kannel.conf). 2007-06-13 21:28:23 [9316] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to pid 9316. 2007-06-13 21:28:23 [9316] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps to pid 9316. 2007-06-13 21:28:23 [9316] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps to pid 9316. 2007-06-13 21:28:23 [9316] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 9316. 2007-06-13 21:28:23 [9316] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) maps to pid 9316. 2007-06-13 21:28:23 [9316] [0] DEBUG: AT2[/dev/ttyUSB0]: Found <13> modems in config 2007-06-13 21:28:23 [9316] [0] INFO: AT2[/dev/ttyUSB0]: read modem definition for <Nokia Phone> 2007-06-13 21:28:23 [9316] [0] DEBUG: Started thread 6 (gw/smsc/smsc_at.c:at2_device_thread) 2007-06-13 21:28:23 [9316] [0] DEBUG: Started thread 7 (gw/bb_smscconn.c:sms_router) 2007-06-13 21:28:23 [9316] [0] INFO: ---------------------------------------- 2007-06-13 21:28:23 [9316] [0] INFO: Kannel bearerbox II version 1.4.1 starting 2007-06-13 21:28:23 [9316] [0] INFO: MAIN: Start-up done, entering mainloop 2007-06-13 21:28:23 [9316] [0] DEBUG: AT2[/dev/ttyUSB0]: start called 2007-06-13 21:28:23 [9316] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 9316. 2007-06-13 21:28:23 [9316] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2007-06-13 21:28:23 [9316] [6] ERROR: AT2[/dev/ttyUSB0]: open failed! ERRNO=13 2007-06-13 21:28:23 [9316] [6] ERROR: System error 13: Permission denied 2007-06-13 21:28:23 [9316] [6] ERROR: AT2[/dev/ttyUSB0]: at2_device_thread: open_at2_device failed. Terminating 2007-06-13 21:28:23 [9316] [6] ERROR: System error 13: Permission denied 2007-06-13 21:28:23 [9316] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2007-06-13 21:28:23 [9316] [6] ERROR: AT2[/dev/ttyUSB0]: open failed! ERRNO=13 2007-06-13 21:28:23 [9316] [6] ERROR: System error 13: Permission denied 2007-06-13 21:28:23 [9316] [6] ERROR: AT2[/dev/ttyUSB0]: at2_device_thread: open_at2_device failed. Terminating 2007-06-13 21:28:23 [9316] [6] ERROR: System error 13: Permission denied -- View this message in context: http://www.nabble.com/open-failed%21-ERRNO%3D13-tf3916446.html#a11104978 Sent from the Kannel - User mailing list archive at Nabble.com.
-- Alejandro Guerrieri Magicom http://www.magicom-bcn.net/ LinkedIn: http://www.linkedin.com/in/aguerrieri
