I've been trying to get my nokia 7610 connected via dku-2 usb cable to
kannel as AT smsc.
So far I was able to send sms but could not receive neither sms nor dlr. The
phone receives sms but doesn't pass it to Kannel.
The problem probably because I could not use at+cnmi command, the phone
responds with errors like this:
2007-10-30 15:19:42 [16771] [6] DEBUG: AT2[Nokia7610]: -->
AT+CNMI=1,2,0,1,0^M
2007-10-30 15:19:42 [16771] [6] DEBUG: AT2[Nokia7610]: <-- ERROR
2007-10-30 15:19:42 [16771] [6] ERROR: AT2[Nokia7610]: Generic error: ERROR
2007-10-30 15:19:42 [16771] [6] ERROR: AT2[Nokia7610]: Initialization of
device failed.
2007-10-30 15:19:42 [16771] [6] INFO: AT2[Nokia7610]: closing device
Is there anything I can do about this or 7610 is at all unusable with
Kannel?
okay, if you connect directly to the phone using ckermit or cu, are you
able to issue that same AT command? where did you source that AT command
from?
i'd say you're right that the reason you're not receiving is due to
rem'ing out the init string ...
cheers
iain
