thank you very much , Alvaro,
as your suggestion I solve the configuration of device, I found the device is
/dev/ttyACM0 not ttyS0
I am so glad of that. but there is new question now
when I try to send AT+CNMI to phone, my kannel get error reply
2007-12-06 17:48:21 [18051] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK
2007-12-06 17:48:21 [18051] [4] DEBUG: AT2[/dev/ttyACM0]: --> AT+CSMS=?^M
2007-12-06 17:48:21 [18051] [4] DEBUG: AT2[/dev/ttyACM0]: <-- +CSMS: (0)
2007-12-06 17:48:21 [18051] [4] DEBUG: AT2[/dev/ttyACM0]: <-- OK
2007-12-06 17:48:21 [18051] [4] DEBUG: AT2[/dev/ttyACM0]: -->
AT+CNMI=1,2,0,1,0^M
2007-12-06 17:48:21 [18051] [4] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR
2007-12-06 17:48:21 [18051] [4] ERROR: AT2[/dev/ttyACM0]: Generic error: ERROR
2007-12-06 17:48:21 [18051] [4] ERROR: AT2[/dev/ttyACM0]: Opening failed.
Terminating
2007-12-06 17:48:21 [18051] [4] INFO: AT2[/dev/ttyACM0]: closing device
2007-12-06 17:48:21 [18051] [4] INFO: AT2[/dev/ttyACM0]: closing device
I don't know what is the problem of it ....
thank you for help me again....
elsie
-- Alvaro Cornejo wrote :
Hi
try the following:
- Before plugin your device on the linux machine make an ls /dev/tty*
see what you have.
- plug your device
- Do another ls /dev/tty* and see what new devices were created. if
any. If there is not new devices, the USB firmware is most probably
not compatible with linux drivers. (I found that with Enfora USB
modems.).
- If so use a terminal emulator to connect to the device. specifying
the new /dev/ttyX as port
- Set correct speed (115200 is default on most modems).
- try to send some CR or AT to see if you get answer from your phone.
Else set speed= 0 and device = /dev/ttyXXX in kannel config and
kannel will try to get the correct baudrate for your modem.
hope helps
Alvaro
Alvaro
On Dec 6, 2007 7:38 AM, xiaoxia YOU <[EMAIL PROTECTED]> wrote:
> hi , everyone
> I am new for the Kannel, and for the linux, And I am so puzzle of them. and
> this is the first time for me to use this forum, I think it is so wonderful.
> I have checked all the topic of the smsc, but I didn't get my result.So I
> want to ask you all again.
>
> my question is :
> 1.can I use nokia N70 as smsc?
> 2.can nokia connect with linux, I try it , but it don't work , the debug is
> : write data wrong, or else...
> 3.I use usb to connect with linux, should I use /dev/ttyS* or /dev/ttyUSB*?
> my result is I can't use /dev/ttyUSB* , it is said can't open the file.
> when I use /dev/ttyS*, it can't init the device successful, after send some
> ATcommend, it get error
> 4.should I connect the phone with window operator system? if so, what can I
> do ? how can I write my configuration, set it as rawtcp?? just my
> thinking...
>
> I think these questions are so stupid, but they puzzle me a lot.
>
> I will so appreciate for your reply.
>
> thank you very much!
>
> elsie
>
--
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y
Nextel en México y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.smsglobal.com.mx y www.pravcom.com
--
This message was sent on behalf of [EMAIL PROTECTED] at openSubscriber.com
http://www.opensubscriber.com/message/[email protected]/8143323.html
