It looks an issue with your sim card. It could need a PIN number to enter. Put your sim card in a "normal " phone and disabled the PIN number to fit your configuration file below (you remove the pin number).
Hope it helps -----Original Message----- From: Blackman Anthony [mailto:[EMAIL PROTECTED] Sent: vendredi 28 décembre 2007 19:52 To: [email protected] Subject: CPIN Error in supporting multiple GPRS Modems in Bearerbox Hello All, I am haveing a problem with my 2nd modem in Bearerbox it does not activate attached is the config and the log. Can anyone send me a sample config that works. Anthony Config File #------------------------------------------------------------------- # Modem include section # include = "/download/Configs/nycmodem.conf" # SMSC CONNECTIONS, for pushing SI, SL, MMS notifications or whatever over SMS #---------------------------------------------------- # SMSC GSM # # This is the USB test tty # # group = smsc smsc = at modemtype = wavecom device = /dev/ttyUSB0 #pin = 2345 validityperiod = 167 group = smsc smsc = at modemtype = wavecom device = /dev/ttyUSB4 #pin = 2345 validityperiod = 167 # Log 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATE0^M 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- OK 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: --> ATE0^M 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- OK 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: --> ATI^M 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATI^M 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- WAVECOM MODEM 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- WAVECOM MODEM 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- MULTIBAND G850 1900 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- MULTIBAND G850 1900 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- OK 2007-12-28 17:43:17 [14349] [7] DEBUG: Loading include file `/download/Configs/nycmodem.conf' (on line 77 of file /download/Configs/pushkannel1.conf). 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: found string <WAVECOM>, using modem definition <Attnyc> 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: --> AT+CSMS=?^M 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:17 [14349] [6] DEBUG: Loading include file `/download/Configs/nycmodem.conf' (on line 77 of file /download/Configs/pushkannel1.conf). 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: found string <WAVECOM>, using modem definition <Attnyc> 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CSMS=?^M 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- +CSMS: (0,1) 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- +CSMS: (0,1) 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- OK 2007-12-28 17:43:17 [14349] [7] INFO: AT2[/dev/ttyUSB4]: Phase 2+ is supported 2007-12-28 17:43:17 [14349] [7] INFO: AT2[/dev/ttyUSB4]: closing device 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:17 [14349] [6] INFO: AT2[/dev/ttyUSB0]: Phase 2+ is supported 2007-12-28 17:43:17 [14349] [6] INFO: AT2[/dev/ttyUSB0]: closing device 2007-12-28 17:43:17 [14349] [7] INFO: AT2[/dev/ttyUSB4]: opening device 2007-12-28 17:43:17 [14349] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: device opened 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2007-12-28 17:43:17 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: device opened 2007-12-28 17:43:17 [14349] [7] INFO: AT2[/dev/ttyUSB4]: init device 2007-12-28 17:43:17 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2007-12-28 17:43:17 [14349] [6] INFO: AT2[/dev/ttyUSB0]: init device 2007-12-28 17:43:17 [14349] [7] INFO: AT2[/dev/ttyUSB4]: speed set to 115200 2007-12-28 17:43:17 [14349] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: --> ATZ^M 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATZ^M 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- OK 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: --> AT^M 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- AT 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- OK 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: --> AT&F^M 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- AT&F 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT&F 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- OK 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: --> ATE0^M 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATE0^M 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- ATE0 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ATE0 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- OK 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: --> AT+IFC=2,2^M 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+IFC=2,2^M 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- OK 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: --> AT+CPIN?^M 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CPIN?^M 2007-12-28 17:43:18 [14349] [7] DEBUG: AT2[/dev/ttyUSB4]: <-- +CPIN: READY 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR 2007-12-28 17:43:18 [14349] [6] ERROR: AT2[/dev/ttyUSB0]: Generic error: ERROR 2007-12-28 17:43:18 [14349] [6] ERROR: AT2[/dev/ttyUSB0]: Opening failed. Terminating 2007-12-28 17:43:18 [14349] [6] INFO: AT2[/dev/ttyUSB0]: closing device 2007-12-28 17:43:18 [14349] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2007-12-28 17:43:18 [14349] [6] INFO: AT2[/dev/ttyUSB0]: init device 2007-12-28 17:43:18 [14349] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATZ^M 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:18 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT&F 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATE0^M 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ATE0 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+IFC=2,2^M 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CPIN?^M 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR 2007-12-28 17:43:19 [14349] [6] ERROR: AT2[/dev/ttyUSB0]: Generic error: ERROR 2007-12-28 17:43:19 [14349] [6] ERROR: AT2[/dev/ttyUSB0]: Opening failed. Terminating 2007-12-28 17:43:19 [14349] [6] INFO: AT2[/dev/ttyUSB0]: closing device 2007-12-28 17:43:19 [14349] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2007-12-28 17:43:19 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2007-12-28 17:43:19 [14349] [6] INFO: AT2[/dev/ttyUSB0]: init device 2007-12-28 17:43:19 [14349] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATZ^M 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- AT&F 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATE0^M 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ATE0 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+IFC=2,2^M 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CPIN?^M 2007-12-28 17:43:20 [14349] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR 2007-12-28 17:43:20 [14349] [6] ERROR: AT2[/dev/ttyUSB0]: Generic error: ERROR 2007-12-28 17:43:20 [14349] [6] ERROR: AT2[/dev/ttyUSB0]: Opening failed. Terminating 2007-1 ____________________________________________________________________________ ________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs _____ Antivirus avast! <http://www.avast.com> : message Sortant sain. Base de donnees virale (VPS) : 071228-0, 28/12/2007 Analyse le : 28/12/2007 22:30:16 avast! - copyright (c) 1988-2007 ALWIL Software.
