Remove the ton and npi settings from the smsc group, and ask your operator for the correct MT msisdn format for sending messages, I usually use this : +CountryCode-MobileNetworkCode-SUBSCRIBER. eg. +218 92 XXXXXXX
Good Luck. benaiad http://almontaha.com.ly On 2/18/08, Hendra <[EMAIL PROTECTED]> wrote: > Dear all, > > > > Thanks for your help for topic Help for Error ERROR: SMPP[XL_1]: got DLR but > could not find message or was not interested in it id<2451373786> > dst<62817xxxxx>, type<2> > > > > You have to use: > msg-id-type = 0x01 > in smsc group > > Good Luck > > benaiad > <http://almontaha.com.ly> almontaha.com.ly > > > > I just try dan solved now. Thank you very much to benaiad. > > > > > > Now I have a problem, when I see status like : > > > > SMSC connections: > XL_1 SMPP:192.168.1.10:10104/10104:xl:TCP (re-connecting, rcvd 7828, > sent 2910, failed 3375, queued 0 msgs) > XL_1 SMPP: 192.168.1.10:10104/10104:xl:TCP (re-connecting, rcvd 5061, > sent 2649, failed 2625, queued 0 msgs) > > > > I worried that summary of failed status, May I know impact of failed status > ? > > > > Anyone can give me advise ? and what should I do to solve this problem ? > > > > Thanks for your help. :-) > > > > > > Best Regards, > > > > > > > > Hendra > > > > ******************* Confidentiality Notice ************************ > This message contains confidential information and is intended only > for the individual named. If you are not the named addressee you > should not disseminate, distribute or copy this e-mail. Please > notify the sender immediately by e-mail if you have received this > e-mail by mistake and delete this e-mail from your system. > ********************************************************** > > > > > > > >
