Hi.
here's the modem conf from my K800i:
#Modem Detection
group = modems
id = sonyericsson_k800
name = "Sony Ericsson K800"
detect-string = "Sony Ericsson"
detect-string2 = "K800"
init-string = "AT+CNMI=2,3"
message-storage = "SM"
enable-mms = true
Explanation on AT+CNMI:
<mode> - 2 = only 2 is the available value for <mode>
<mt> - 3 = i just chose the higher value
there are other values but my instinct said i dont need it. =D
ok while typing this reply i found motorola's AT command:
i cant attach the file because our server cant attache files more than 3MB
here's the website:
http://developer.motorola.com/docstools/developerguides/
you should register for free before you can download these guides
thanks!
Clarence
denis punnoose wrote:
Hi */Clarence/*
(but i m not sure it is right)Thanx 4 the reply, in the manual 4
Motorola C350, nothin about AT commands r given. On searching the net
i found that 4 Motorola C350, AT+CNMI = 3,1,0,0,0. I tried it but it
gav the same error.
group = smsc
smsc = at
modemtype = auto
device = /dev/ttyACM0
my-number = 91**********
connect-allow-ip = 127.0.0.1
log-level = 0
group = modems
id = motorola
name = moto
detect-string = "motorola"
detect-string2 = "C350"
init-string = "AT+CNMI = 3,1,0,0,0"
*/Clarence Carino <[EMAIL PROTECTED]>/* wrote:
hi denis
i would suggest reading the AT manual for you phone and add the
init-string yourself.
i did that on my SE K800i and now its working.
just look at the AT+CNMI on the manual then it should have an
explanation on the values so you would have an option on what to add.
thanks.
denis punnoose wrote:
> Hi all,
>
> I am using Motorola C350 as a virtual SMSC. I'm using the following
> MODEM conf -
>
> group = modems
> id = motorola
> name = moto
> detect-string = "motorola"
> detect-string2 = "C350"
>
> group = modems
> id = generic
> name = "Generic Modem"
>
> when i type - ./bearerbox -v 1 smskannel.conf,
> i get the followin ERROR-
>
> ERROR: AT2[/dev/ttyACM0]: Generic error: ERROR
> ERROR: AT2[/dev/ttyACM0]: Opening failed. Terminating
>
> I think it failed to detect the cell. How should i know what to
equate
> to 'detect-string' n 'detect-string2'.
>
>
------------------------------------------------------------------------
> 5, 50, 500, 5000 - Store N number of mails in your inbox. Click
here.
>
------------------------------------------------------------------------
Save all your chat conversations. Find them online.
<http://in.rd.yahoo.com/tagline_webmessenger_3/*http://in.messenger.yahoo.com/webmessengerpromo.php>
