I'm using iTegno WM1080A+ on Ubuntu 8.04 LTS I try to run the bearerbox not luck. It stuck at AT+CSMS How can I solve it?
2008-08-30 02:21:15 [18392] [0] INFO: HTTP: Opening server at port 13000. 2008-08-30 02:21:15 [18392] [0] DEBUG: Started thread 1 (gwlib/fdset.c:poller) 2008-08-30 02:21:15 [18392] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to pid 18392. 2008-08-30 02:21:15 [18392] [2] DEBUG: Thread 2 (gwlib/http.c:server_thread) maps to pid 18392. 2008-08-30 02:21:15 [18392] [0] DEBUG: Started thread 2 (gwlib/http.c:server_thread) 2008-08-30 02:21:15 [18392] [0] DEBUG: Started thread 3 (gw/bb_http.c:httpadmin_run) 2008-08-30 02:21:15 [18392] [0] DEBUG: starting smsbox connection module 2008-08-30 02:21:15 [18392] [0] INFO: BOXC: 'smsbox-max-pending' not set, using default (100). 2008-08-30 02:21:15 [18392] [0] DEBUG: Started thread 4 (gw/bb_boxc.c:sms_to_smsboxes) 2008-08-30 02:21:15 [18392] [0] DEBUG: Started thread 5 (gw/bb_boxc.c:smsboxc_run) 2008-08-30 02:21:15 [18392] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 18392. 2008-08-30 02:21:15 [18392] [0] INFO: Set SMS resend frequency to 60 seconds. 2008-08-30 02:21:15 [18392] [0] INFO: SMS resend retry set to unlimited. 2008-08-30 02:21:15 [18392] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) maps to pid 18392. 2008-08-30 02:21:15 [18392] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps to pid 18392. 2008-08-30 02:21:15 [18392] [0] INFO: DLR rerouting for smsc id <(null)> disabled. 2008-08-30 02:21:15 [18392] [0] INFO: AT2[/dev/ttyUSB0]: configuration doesn't show modemtype. will autodetect 2008-08-30 02:21:15 [18392] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 18392. 2008-08-30 02:21:15 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: detecting modem type 2008-08-30 02:21:15 [18392] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2008-08-30 02:21:15 [18392] [0] DEBUG: Started thread 6 (gw/smsc/smsc_at.c:at2_device_thread) 2008-08-30 02:21:15 [18392] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) maps to pid 18392. 2008-08-30 02:21:15 [18392] [7] DEBUG: sms_router: time to sleep 30.00 secs. 2008-08-30 02:21:15 [18392] [0] DEBUG: Started thread 7 (gw/bb_smscconn.c:sms_router) 2008-08-30 02:21:15 [18392] [0] INFO: ---------------------------------------- 2008-08-30 02:21:15 [18392] [0] INFO: Kannel bearerbox II version 1.4.1 starting 2008-08-30 02:21:15 [18392] [0] INFO: MAIN: Start-up done, entering mainloop 2008-08-30 02:21:15 [18392] [0] DEBUG: AT2[/dev/ttyUSB0]: start called 2008-08-30 02:21:15 [18392] [7] DEBUG: sms_router: gwlist_len = 0 2008-08-30 02:21:15 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2008-08-30 02:21:16 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2008-08-30 02:21:16 [18392] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2008-08-30 02:21:16 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ^M 2008-08-30 02:21:18 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M 2008-08-30 02:21:18 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:18 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M 2008-08-30 02:21:18 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:18 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATE0^M 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATI^M 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- WAVECOM MODEM 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- MULTIBAND 900E 1800 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: found string <WAVECOM>, using modem definition <Wavecom> 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CSMS=?^M 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR 2008-08-30 02:21:19 [18392] [6] ERROR: AT2[/dev/ttyUSB0]: Generic error: ERROR 2008-08-30 02:21:19 [18392] [6] INFO: AT2[/dev/ttyUSB0]: closing device 2008-08-30 02:21:19 [18392] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2008-08-30 02:21:19 [18392] [6] INFO: AT2[/dev/ttyUSB0]: init device 2008-08-30 02:21:19 [18392] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATZ^M 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATE0^M 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:19 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+IFC=2,2^M 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CMGF=0^M 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CSMS=?^M 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR 2008-08-30 02:21:20 [18392] [6] ERROR: AT2[/dev/ttyUSB0]: Generic error: ERROR 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT+CNMI=2,2,0,0,0^M 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- ERROR 2008-08-30 02:21:20 [18392] [6] ERROR: AT2[/dev/ttyUSB0]: Generic error: ERROR 2008-08-30 02:21:20 [18392] [6] ERROR: AT2[/dev/ttyUSB0]: Opening failed. Terminating 2008-08-30 02:21:20 [18392] [6] INFO: AT2[/dev/ttyUSB0]: closing device 2008-08-30 02:21:20 [18392] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: device opened 2008-08-30 02:21:20 [18392] [6] INFO: AT2[/dev/ttyUSB0]: init device 2008-08-30 02:21:20 [18392] [6] INFO: AT2[/dev/ttyUSB0]: speed set to 115200 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATZ^M 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT^M 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> AT&F^M 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: <-- OK 2008-08-30 02:21:20 [18392] [6] DEBUG: AT2[/dev/ttyUSB0]: --> ATE0^M 2008-08-30 02:21:21 [18392] [0] WARNING: Killing signal or HTTP admin command received, shutting down... Configuration # # CORE # group = core admin-port = 13000 smsbox-port = 13001 admin-password = bar box-deny-ip = "*.*.*.*" box-allow-ip = "127.0.0.1" #log-file = "/var/log/kannel/bearerbox.log" #log-level = 0 # # SMSC CONNECTIONS # group = smsc smsc = at modemtype = auto device = /dev/ttyUSB0 speed = 115200 connect-allow-ip = 127.0.0.1 group = modems id = wavecom name = Wavecom detect-string = "WAVECOM" init-string = "AT+CNMI=2,2,0,0,0" no-pin = true # # SMSBOX SETUP # group = smsbox bearerbox-host = localhost sendsms-port = 13013 global-sender = +60123456789 log-level = 0 # # SEND-SMS USERS # group = sendsms-user username = tester password = foobar concatenation = true max-messages = 4 # # SERVICES # group = sms-service keyword = mytest text = "reply to mytest"
