Throughput problem on 1.4.2

[Christos Karaviotis]

Hi people, I know that this must have been asked dozen of times.  I have checked the last 2 years archives but found nothing. OK here is my problem, I have upgraded Kannel from 1.4.1 to 1.4.2 and now I have the need due to 'throughput error' to limit the messages per second that Kannel sends to the SMPP.  Our provider limits us to 2 m/sec.  I have added under the specific SMSC configuration the 'throughput = 2' but no luck.  Kannel still tries to send the entire queue at once. Here is the configuration group = smsc smsc = smpp smsc-id = A host = 213.***.***.*** port = 6200 bind-addr-ton = 1 bind-addr-npi = 1 source-addr-ton = 5 source-addr-npi = 0 dest-addr-ton = 1 dest-addr-npi = 1 smsc-username = "*******" smsc-password = ******* system-type = "kannel" throughput = 2 wait-ack = 1 max-pending-submits = 1 address-range = "91.***.***.***" Did I have to compile Kannel with some special parameters or did I have to do something and I did not do? Thank you Chris