Thanks Falko. When i'll find sometihing i'll post it to the list. Regards Mariella
>----Messaggio originale---- >Da: [email protected] >Data: 12/02/2009 8.51 >A: "Nikos Balkanas"<[email protected]>, <[email protected]> >Cc: "[email protected] User"<[email protected]> >Ogg: Re: send sms to application on specific port on phone > >Sorry Nikos, this time you are wrong. >Mariella, You can send SMS to a specified port. But this is not >defined inside kannel. You have to set a special UDH. Inside the UDH a >Port can be specified. But I currently don't find the specification >for it in my archives. Please google a little bit, try searching for >UDH, Port and Smart Messaging. And when you find something, please >post it to the list. > >Regards >Falko > >Am 12.02.2009 um 01:03 schrieb Nikos Balkanas: > >> Hi Mariella, >> >> What you describe is not possible. It is not even a kannel issue. >> PPG is sent as a binary SMS. It follows the same route as regular >> SMS. From bearerbox it is delivered to an SMSc and from there to the >> mobile. Therefore the SMSc is responsible for delivering the content >> to the mobile. This happens according to the SMS spec and is not >> configurable. >> >> BR, >> Nikos >> ----- Original Message ----- From: <[email protected]> >> To: <[email protected]> >> Sent: Wednesday, February 11, 2009 12:21 PM >> Subject: send sms to application on specific port on phone >> >> >>> Hi everyone, I have installed kannel and i sended successfully >>> simple sms and >>> wap push sms to my nokia phone. Now i would send with kannel a sms >>> (simple or >>> wap push) to a midlet installed on my phone on port 50000. What i >>> must specifed >>> in file.conf and where? Thanks in advance.. >>> Mariella... >> >> > >
