Hello, sorry it should be problem by text encoding ( for 'TAB'), so here is it again:
------------------------------- <?xml version="1.0" encoding="UTF-8" standalone = "yes" ?> <!DOCTYPE wap-provisioningdoc PUBLIC "-//WAPFORUM//DTD PROV 1.0//EN" " http://www.wapforum.org/DTD/prov.dtd";> <wap-provisioningdoc> <!-- WLAN AP profile settings --> <characteristic type="NAPDEF"> <parm name="NAME" value="wlanssid"></parm> <parm name="NAPID" value="wlanssid"></parm> <parm name="PROVIDER-ID" value="wlanssid"></parm> <parm name="BEARER" value="WLAN"></parm> <characteristic type="WLAN"> <parm name="PRI-SSID" value="wlanssid"></parm> <parm name="NETMODE" value="INFRA"></parm> <parm name="SECMODE" value="WPA-PRESHARED-KEY"></parm> <parm name="WPA-PRES-KEY-ASC" value="password"></parm> </characteristic> </characteristic> </wap-provisioningdoc> ------------------------------- Regards Pai ---------- Forwarded message ---------- From: Nikos Balkanas <[email protected]> Date: 2009/2/25 Subject: Re: xml to wbxml compiler incorrect by 1.4.2!? To: Pai Peng <[email protected]>, [email protected] Hi, No, it is not a problem for me to get it. Input string is the important part. What is the deal with the BB's? I imagine they are not part of the message. I have to implement something important now, but I will look at it immediately after. Thanx, Nikos ----- Original Message ----- *From:* Pai Peng <[email protected]> *To:* [email protected] *Sent:* Wednesday, February 25, 2009 9:50 AM *Subject:* Fwd: xml to wbxml compiler incorrect by 1.4.2!? Hello Nikos, so as example for WLAN Access Point OMA Provisioning for Nokia: <?xml version="1.0" encoding="UTF-8" standalone = "yes" ?> <!DOCTYPE wap-provisioningdoc PUBLIC "-//WAPFORUM//DTD PROV 1.0//EN" " http://www.wapforum.org/DTD/prov.dtd";> <wap-provisioningdoc> <!-- WLAN AP profile settings --> <characteristic type="NAPDEF"> Β Β Β <parm name="NAME" value="wlanssid"></parm> Β Β Β <parm name="NAPID" value="wlanssid"></parm> Β Β Β <parm name="PROVIDER-ID" value="wlanssid"></parm> Β Β Β <parm name="BEARER" value="WLAN"></parm> Β Β Β <characteristic type="WLAN"> Β Β Β Β Β Β <parm name="PRI-SSID" value="wlanssid"></parm> Β Β Β Β Β Β <parm name="NETMODE" value="INFRA"></parm> Β Β Β Β Β Β <parm name="SECMODE" value="WPA-PRESHARED-KEY"></parm> Β Β Β Β Β Β <parm name="WPA-PRES-KEY-ASC" value="password"></parm> Β Β Β </characteristic> </characteristic> </wap-provisioningdoc> the encoded wbxml binary format can be read in debug mode of smsc. (encoded by kannel with file ota_compile.c, not wmlsc or wmlsadm). Sorry I can't read the binary format directly on this PC, and it shouldn't be a problem for you to get it, istn't it? As document: http://www.forum.nokia.com/info/sw.nokia.com/id/1b4c4ecc-f788-44fa-98bc-1654042eb010/S60_Platform_OMA_Client_Provisioning_v2_1_en.pdf.html Regards Pai ---------- Forwarded message ---------- From: Nikos Balkanas <[email protected]> Date: 2009/2/25 Subject: Re: xml to wbxml compiler incorrect by 1.4.2!? To: Pai Peng <[email protected]>, [email protected] Hi, Β It cannot be a problem by Nokia. Otherwise libwbxml2 wouldn't encode it. More likely it seems to be a kannel hickup. Again I would appreciate if someone could send input string, string encoded by kannel (wmlsc, wmlsadm, etc.) and libwbxml2 so that I can track the problem. This could make things easier for anybody involved, since you wouldn't have to create the wbxmlΒ with libwbxml2 and then feedΒ it into kannel. Β BR, Nikos ----- Original Message ----- *From:* Pai Peng <[email protected]> *To:* [email protected] *Sent:* Wednesday, February 25, 2009 1:30 AM *Subject:* Fwd: xml to wbxml compiler incorrect by 1.4.2!? Hello Zillur, thanks for sharing your information, just after solved my problem. It is a bit later for me, but should be not for the following people. To Nikos: What I can confirm is, that the encoded WBXML by Kannel can be decoded into XMl by wbxml Library. Only the Nokia looks like not to be compatible with Kannel by OMA provisioning (WBXML). There is no reference for Nokia WBXML standard, and I can't figure out the problem on the Nokia device. But if I find something useful, i will share with you to improve the Kannel by Nokia OMA provisioning. Regards Pai ---------- Forwarded message ---------- From: zillur rahman <[email protected]> Date: Mon, Feb 23, 2009 at 6:31 PM Subject: Re: xml to wbxml compiler incorrect by 1.4.2!? To: Pai Peng <[email protected]> Hi Pai, I had a little bit of same probelem. I tried to send GPRS OMA configuration Message through Kannel. But at the Nokia and all other sets message come in invalid format. later Ξ’Β used xml2wbxml tool in Linux and send the sms using UDH through Kannel. Now all nokia set successfully received the configuration message. At that time i studied on OAM configuation Message to configure GPRS,MMS etc. It seems everything is possible by yourself. Thanks Zillur On Wed, Feb 4, 2009 at 1:15 AM, Pai Peng <[email protected]> wrote: > hello, > > > i have dumped the wbxml data for a OTA-Prov XML into a binary file, which > data is converted by ota_compiler.c. > > With libxbxml tool (convert wbxml back to xml) to check validity, I got > error by wbxml2xml: > > *************************** > Ξ’Β Converting file: output.wbxml > (0) Parsed version: '0x1' > (1) Parsed publicid: '0x6' > (2) Parsed charset: '0x2F' > (3) Parsing strtbl > Ξ’Β Ξ’Β Ξ’Β Checking PublicID > Ξ’Β Ξ’Β Ξ’Β PublicID token: 0x6 > Ξ’Β Ξ’Β Ξ’Β PublicID : '-//WAPFORUM//DTD SL 1.0//EN' > (35) Parsing body > (35) Parsing element > (35) Parsing stag > (36) Parsing content: '0x33' > (36) Parsing element > (36) Parsing stag > (37) Parsing content: '0x34' > (37) Parsing element > (37) Parsing stag > (38) Parsing content: '0x34' > (38) Parsing element > (38) Parsing stag > (39) Parsing content: '0x39' > (39) Parsing element > (39) Parsing stag > (40) Parsing content: '0x44' > (40) Parsing element > (40) Parsing stag > (40) Parsing literalTag > WBXML Parser failed at 41 - token: 34 (Invalid String Table Index) > wbxml2xml convertion failed - WBXML Parser Error: Invalid String Table Index > Current allocations: 0 areas, 0 bytes > Highest number of allocations: 33 areas > Highest memory usage: 6001 bytes > > I can be sure, that the wbxml2xml works corretly. > So my question is, if the kannel's implementation of wbxml is correct or the > compatibility protocol with libwbxml? has somebody got the same problem by > XML to WBXML converting? > > > Regards > > Pai >
