Hi Dlr-url is defined on sendsms-user if you want a dlr with no info from your own. In your case, as you are going to use your own message Id, you have to create it dynamically for each MT and put it in each call to kannel, as my example in previous mail.
In your sendsms-user do not add dlr-url parameter. sms statuses are read backwards: 16 = not delivered to smsc 8 = you submitted to smsc. ie smsc tell kannel he has the msg 4 = msg is in smsc queue. ie smsc tell kannel he queued the msg in its queue. 2 = failed 1 = delivered to phone Also note that not all smsc provide all the statuses, mainly status 4 is not provided by all smsc's since smsc's asume that if they got the message, it is queued if not rejected for any reason nor delivered¡?¡? Alvaro On Thu, 2009-03-05 at 17:51 +0100, Elton Hoxha wrote: > As dlr-url is defined statically in the conf file, so which is the > respective parameter for 1111, 2222, etc > > group = sendsms-user > username = b > password = b > dlr-url = > "http://10.1.21.236:2469/KannelGetStatus.asmx/GetStatus?dlrv=% > d&status=%F&myid=(something like $parameter - ?)" > > It is so simple issue, thats why its driving me crazy :) > > By the way....in the delivery reports explanations, which is the > difference between status 4 and status 8? > > Thanks Alvaro > > > > > On Thu, Mar 5, 2009 at 5:38 PM, Alvaro Cornejo > <[email protected]> wrote: > Hi > > It can be just as simple as: > > dlr-url > ="http://10.1.21.236:2469/KannelGetStatus.asmx/GetStatus?dlrv= > % > > d&myid=1111" > > or add any additional info you might need. > > This might be your full call to kannel. Note you will better > urlencode() > the full dlr-url (as well as message text) prior to post it to > kannel to > avoid issues with some chars: > > > http://localhost:13004/cgi-bin/sendsms?username=remindme&password=alerts&to=4043078165&text=test&dlr-mask=31&drl-url='http://10.1.21.236:2469/KannelGetStatus.asmx/GetStatus?dlrv=%d&myid=1111' > > So, for each MT you send to kannel you need to change the > value of > "myid" > > Finally take a look at dlr-mask value in order to get only the > statuses > you are interested in. (31 = All statuses) > > And that's it > > Regards > > Alvaro > > > > On Thu, 2009-03-05 at 17:01 +0100, Elton Hoxha wrote: > > Thanks for your reply. > > > > I think that %i parameter is useful when we deal with > multiple smpp > > connections, making possible to defer the shortcodes from > eachother. > > The scenario that i`m interested is like this: > > > > My application submits an MT message to Kannel adding that > extra > > generated ID (let`s say 1111, to keep track of that sms) to > the URL, > > Kannel forwards it to SMSC and SMSC returns absent > subscriber (phone > > switched off) Nak. Then kannel returns the value 8 or 4 (I > guess so, > > just being submitted to SMSC waiting in the queue). Now, > whenever the > > subscriber switches on the phone and the sms get delivered, > SMSC will > > send an ack to kannel, and I want KAnnel at that moment to > send back > > to me the message status (i guess it will send 1) and that > generated > > ID 1111. > > > > As all parameters are predefined in kannel, please can you > tell me how > > to put the correct parameter for myid. > > > > dlr-url > ="http://10.1.21.236:2469/KannelGetStatus.asmx/GetStatus?dlrv= > > %d&status=%F&myid=?" > > > > > > Many thanks > > > > > > > > > > On Thu, Mar 5, 2009 at 4:42 PM, Alvaro Cornejo > > <[email protected]> wrote: > > Hi > > > > If you are refering to the message unique > identifier, you must > > generate > > it and feed it into the dlr-url. You can feed any > info you > > like to > > dlr-ulr. Kannel will honour that url and will only > replace the > > values he > > know about (%P,%a, %q, etc) the rest of url will be > send back > > exactly as > > you sent it to kannel. > > > > Then when kannel has an dlr to feed you back to your > > application, kannel > > will sent the info provided by the dlr-url and your > script > > will handle > > it as you wish... or simply does nothing if don't > need dlr but > > use a > > fake script just to make kannel feel good ;D > > > > Note that depending on your needs, that unique id > might not be > > necessary. Dlr is used to track message status > -either for > > billing/stats/other- and you can get different > parameters for > > having the > > detailed info, again if needed. > > > > However, if you are refering to smsc id (the > identification of > > the > > "route") it is %i and it will be the id you set on > your smcs > > config. > > > > Regards > > > > Alvaro > > > > > > On Thu, 2009-03-05 at 16:21 +0100, Elton Hoxha > wrote: > > > Hi Alvaro, > > > > > > I was checking the mail list and I am reading your > > communication with > > > other guy regarding dlr-url. > > > > > > Refering to: > > > > > > >>> > --- On Tue, 1/13/09, Alvaro Cornejo > > > >>> <[email protected]> wrote: > > > > > > >>> > From: Alvaro Cornejo > > <[email protected]> > > > >>> > Subject: Re: dlr-url > > > >>> > To: "Drew Stockler" > > <[email protected]> > > > > > > >>> > Cc: [email protected] > > > >>> > Date: Tuesday, January 13, > 2009, 6:27 > > PM > > > >>> > > > > >>> > Hi Drew > > > > > > >>> > > > > >>> > The status of your message > is dlrv=8 > > that means > > > >>> message delivered to > > > >>> > your smsc. Check docs for > the other > > status > > > > > > >>> > values. > > > >>> > > > > >>> > I'm not sure but I think > that %a and % > > A is "ACK%2F" > > > >>> because it is > > > >>> > the > > > > > > >>> > "sms text part" of the dlr > message. In > > this case, > > > >>> the text received > > > >>> > is > > > >>> > the "ACK" from bearerbox > when > > submitting the message > > > > > > >>> to your smsc. > > > >>> > > > > >>> > I think you don't need this > info to > > match your dlr, > > > >>> I'll add intead an > > > >>> > ID from your own in the > dlr-url so you > > can use it to > > > > > > >>> match dlr with your > > > >>> > database and update the > appropiate > > reccord > > > >>> accordingly to the dlr. > > > >>> > > > > >>> > you can use something like: > > > > > > >>> > > > > >>> > > > > >>> > > > >>> > > > > http://localhost:13004/cgi-bin/sendsms?username=remindme&password=alerts&to=4043078165&text=test&dlr-mask=31&drl-url='http://localhost/sms.php?phone=%p&smsid=[YourOwnId]×tamp=%T&dlrv=%d' > > > > > > >>> > > > > >>> > and have your sms.php script > look at > > the db for the > > > >>> smsid value and > > > >>> > update the status field > accordingly. > > Something like: > > > > > > >>> > > > > >>> > UPDATE table SET dlrv > = $dlrv, > > timestamp= > > > >>> $timestamp WHERE msg_id = > > > >>> > $smsid AND from_number = > > > > > > >>> > $phone > > > >>> > > > > >>> > > > > >>> > Hope helps > > > > > > I would like to ask, while setting this unique ID > from > > application > > > side, how can I represent it in the sendsms-user > block? So > > > > > > dlr-url = > > > > > > "http://10.1.21.236:2469/KannelGetStatus.asmx/GetStatus?dlrv=% > > > d&status=%F&smsid=?" > > > > > > Table 6.9 has all the parameters that we can use, > how can I > > add the > > > escape code here for the smsid?? > > > > > > Thanks > > > Elton > > > > > > > > > > > >
