Hi,
An excellent modem with long kannel track record is the Wavecom fasttrack.
However, not to throw your money away on your (Zadacom)? modem try the
technical support from your store beforehand.
SIM brand is irrelevant.
BR,
Nikos
----- Original Message -----
From: "Monchanin Eric" <[email protected]>
To: <[email protected]>
Sent: Monday, April 20, 2009 6:06 PM
Subject: Re: Sierra Wireless Modem
Hi all,
Thanks for the tips,
I did install Sierra drivers, and still get absolutely nothing on the modem.
As Alvaro noticed, the keep alive string : AT+CBC;+CSQ gets an empty
string result. So I am assuming the modem has some problem.
I am thinking about getting a new one, so I'd like your inputs on the
matter. Maybe some modems are buggy, or not well supported by kannel.
What modem would you recommend me to use, going to use an AT&T SIM with
that ??
Bests,
Eric
Nikos Balkanas a e'crit :
Hi,
Sierra Wireless make their own Linux drivers. Go to their site and
download them. You might also get their AT reference manual while at it.
BR,
Nikos
----- Original Message ----- From: "Monchanin Eric"
<[email protected]>
To: <[email protected]>
Sent: Friday, April 17, 2009 2:20 AM
Subject: Re: Sierra Wireless Modem
I tried with %2B, without, with a local number (without %2B1) and the
the same results.
I saw some people using
init-string = AT+CGDCONT=2,"IP","ISP.CINGULAR"
you told me to use
init-string = AT+CNMI=2,1,2,0,0;AT+CMEE=1
Is there a way somehow to combine both strings since you said CMEE is
the modem error verbosity.
Since the modem works on XP, I assumed it "could" also work with a linux
setup
Would using another modem possibly solve this issue ? and what is the
most well know modem I could use for that ?
Bests,
Eric
Alvaro Cornejo a ιcrit :
the destination number is in international format?? I see 16xx9x0xx30
if so, in the sendsms call you must add the plus sign before the
number ....&to=+16xx9x0xx30&.... you must urlencode the plus sign
(it is %2B)
Kannel might be sending your number as a local number
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Thu, Apr 16, 2009 at 10:56 AM, Monchanin Eric
<[email protected]> wrote:
Sure, here are the kannel (bearerbox) and smsbox logs, from the exact
same "test"
Hope it helps.
Bests,
Eric
Alvaro Cornejo a ιcrit :
Hi Eric
Something seems wrong with the modem. in return to > AT+CSQ^M you
should receive something like
2009-04-16 09:21:51 [21755] [8] DEBUG: AT2[telcel2]: --> AT+CSQ;^M
2009-04-16 09:21:51 [21755] [8] DEBUG: AT2[telcel2]: <-- +CSQ: 24,99
that shows modem signal quality and BERR
Also, your log does not show any sms transaction. Can you capture a
sms transaction log?
Algo from smsbox & bearerbox
Regards
|-----------------------------------------------------------------------------------------------------------------|
Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2 vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Thu, Apr 16, 2009 at 8:44 AM, Monchanin Eric
<[email protected]> wrote:
Hello Alvaro,
The modem seems to accept the config modifications and starts up
correctly.
The SIM card I use can send SMS, that's my usual phone SIM card. I
tested the modem under windows XP, and could send SMS.
Although everything seems to be working here, no SMS is actually sent
out, and the other phone just doesn't get anything.
sierra.log file attached,
Thank you a lot for your help !
Eric
Alvaro Cornejo a ιcrit :
Hello Eric
Try this:
group = modems
id = sierra
name = "Sierra Wireless, Inc. MC8775 Device"
detect-string = "Sierra Wireless, Inc."
need-sleep = true
init-string = AT+CNMI=2,1,2,0,0;AT+CMEE=2
message-storage = SM
keepalive-cmd = AT+CBC;+CSQ
reset-string = AT+CFUN=1
group = smsc
smsc = at
smsc-id = sierra
modemtype = auto
device = /dev/ttyUSB0
speed = 9600
modemtype = auto
allowed-smsc-id = sierra
sim-buffering = false
keepalive = 60
max-error-count = 5
log-file = "/var/log/kannel/sierra.log"
All logs from the modem will be logged separatly in the
sierra.log log.
If modem complain about CMEE=2 try CMEE=1. This enables modem
error verbose
Post logs
Also check that the sim you are using has credit and is allowed to
send sms. Put it in a regular phone and test sending messages.
Hope Helps
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envνe y Reciba Datos y mensajes de Texto (SMS) hacia y desde
cualquier
celular y Nextel
en el Perϊ, Mιxico y en mas de 180 paises. Use aplicaciones 2
vias via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Wed, Apr 15, 2009 at 4:28 PM, Monchanin Eric
<[email protected]> wrote:
Hello Alvaro,
I am using bites of configs found on kannel's mailing list, without
knowing exactly what I am doing.
In the modem, I am using a personnal SIM card connected to a
standard
phone plan (voice, MMS, SMS, wap)
I am merely trying to learn and hopefully get it working :-)
How do you see I send sms using GPRS command ? Is there another
way for
me to do that with kannel ?
Bests,
Eric
Alvaro Cornejo a ιcrit :
Why are you using GPRS command to send sms?
Did your gateway support sms over gprs???
Regards
Alvaro
On Tue, 2009-04-14 at 20:30 -0400, Monchanin Eric wrote:
Hello guys,
I am struggling on a little project which goals is to use
kannel with a
USB Sierra Wireless modem MC 8775 (it's a 3 bands modem)
Once plugged in, the modem appears in the lsusb as :
Bus 001 Device 008: ID 1199:6812 Sierra Wireless, Inc. MC8775
Device
My configuration file allows me to launch bearerbox and smsbox
apparently correctly check config file included
The log file looks like the file kannel.log
So far so good I would say, my problem now is the following,
When I want to send an SMS, using the cgi interface,
http://localhost13013/cgi-bin/sendsms?smsc=sierra&username=tester&password=foobar&from=16xx7x4xx33&to=17yy4y2yy36&text=hello+from+3g+modem
I get what looks like a successfull message
0: Accepted for delivery
and in the smsbox.log file
2009-04-14 17:41:46 [12913] [2] DEBUG: HTTP: Creating
HTTPClient for
`192.168.1.4'.
2009-04-14 17:41:46 [12913] [2] DEBUG: HTTP: Created
HTTPClient area
0x963c468.
2009-04-14 17:41:46 [12913] [3] INFO: smsbox: Got HTTP request
</cgi-bin/sendsms> from <192.168.1.4>
2009-04-14 17:41:46 [12913] [3] INFO: sendsms used by <tester>
2009-04-14 17:41:46 [12913] [3] INFO: sendsms
sender:<tester:16317046633> (192.168.1.4) to:<17yy4y2yy36>
msg:<hello
from 3g modem>
2009-04-14 17:41:46 [12913] [3] DEBUG: Stored UUID
1885da2f-0c90-4bb4-961c-66b8f49be6ca
2009-04-14 17:41:46 [12913] [3] DEBUG: message length 19,
sending 1 messages
2009-04-14 17:41:46 [12913] [3] DEBUG: Status: 202 Answer:
<Sent.>
2009-04-14 17:41:46 [12913] [3] DEBUG: Delayed reply - wait
for bearerbox
2009-04-14 17:41:46 [12913] [0] DEBUG: Got ACK (0) of
1885da2f-0c90-4bb4-961c-66b8f49be6ca
2009-04-14 17:41:46 [12913] [0] DEBUG: HTTP: Resetting
HTTPClient for
`192.168.1.4'.
Now, the message is never received on the phone, and in the
"status"
page, I see that 0 sms were sent, 0 sms were received, 0 sms
are queued
So, my question is the following, am I doing something wrong,
is my
config file correct, and what needs to be fixed in order to
have an
actual SMS sending.
Thank you for your time reading my post,
Hoping the config example, or whatever is right in it, might help
someone in the future ;-)
Eric
plain text document attachment (kannel_gprs.conf)
group = core
admin-port = 13000
smsbox-port = 13001
admin-password = foobar
status-password = foobar
log-file = "/tmp/kannel.log"
log-level = 0
box-deny-ip = "*.*.*.*"
box-allow-ip = "*.*.*.*"
access-log = "/tmp/access.log"
group = smsc
smsc = at
smsc-id = sierra
device = /dev/ttyUSB0
speed = 9600
modemtype = auto
group = modems
id = sierra
name = "Sierra Wireless, Inc. MC8775 Device"
detect-string = "Sierra Wireless, Inc."
init-string = AT+CGDCONT=1,"IP","proxy"
group = smsbox
bearerbox-host = localhost
sendsms-port = 13013
global-sender = 16xx7x4xx33
sendsms-chars = "0123456789 +-"
log-file = "/tmp/smsbox.log"
log-level = 0
access-log = "/tmp/access.log"
group = sendsms-user
username = tester
password = foobar
group = sms-service
keyword = default
get-url = http://localhost:13014/recv?from=%p&text=%b
max-messages = 0
2009-04-16 06:48:29 [1178] [6] DEBUG: AT2[sierra]: detecting modem
type
2009-04-16 06:48:29 [1178] [6] INFO: AT2[sierra]: opening device
2009-04-16 06:48:29 [1178] [6] DEBUG: AT2[sierra]: device opened.
Telnet mode = 0
2009-04-16 06:48:30 [1178] [6] DEBUG: AT2[sierra]: device opened
2009-04-16 06:48:30 [1178] [6] INFO: AT2[sierra]: speed set to 9600
2009-04-16 06:48:30 [1178] [6] DEBUG: AT2[sierra]: --> ^M
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: --> AT^M
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: --> AT&F^M
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: --> ATE0^M
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: --> ATI^M
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: <-- Sierra
Wireless, Inc.
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: <-- MC8775
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: <-- APP1
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: found string
<Sierra Wireless, Inc.>, using modem definition <Sierra Wireless,
Inc. MC8775 Device>
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: --> AT+CSMS=?^M
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:32 [1178] [6] INFO: AT2[sierra]: Closing device
2009-04-16 06:48:32 [1178] [6] INFO: AT2[sierra]: opening device
2009-04-16 06:48:32 [1178] [6] DEBUG: AT2[sierra]: device opened.
Telnet mode = 0
2009-04-16 06:48:33 [1178] [6] DEBUG: AT2[sierra]: device opened
2009-04-16 06:48:33 [1178] [6] INFO: AT2[sierra]: Logging in
2009-04-16 06:48:34 [1178] [6] INFO: AT2[sierra]: init device
2009-04-16 06:48:34 [1178] [6] INFO: AT2[sierra]: speed set to 9600
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: --> ATZ^M
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: --> AT^M
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: --> AT&F^M
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: --> ATE0^M
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: --> AT+IFC=2,2^M
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: --> AT+CPIN?^M
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: <-- +CPIN: READY
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: --> AT+CMGF=0^M
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: --> AT+CSMS=?^M
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:34 [1178] [6] DEBUG: AT2[sierra]: -->
AT+CNMI=2,1,2,0,0;AT+CMEE=2^M
2009-04-16 06:48:35 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:35 [1178] [6] INFO: AT2[sierra]: AT SMSC
successfully opened.
2009-04-16 06:48:37 [1178] [6] DEBUG: AT2[sierra]: --> AT+CBC;+CSQ^M
2009-04-16 06:48:37 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:49:17 [1178] [6] DEBUG: AT2[sierra]:
TP-Validity-Period: 24.0 hours
2009-04-16 06:49:17 [1178] [6] DEBUG: AT2[sierra]: --> AT+CMGS=31^M
2009-04-16 06:49:17 [1178] [6] DEBUG: AT2[sierra]: <--
2009-04-16 06:49:17 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:49:17 [1178] [6] DEBUG: AT2[sierra]: send command
status: 0
2009-04-16 06:50:19 [1178] [6] DEBUG: AT2[sierra]: --> AT+CBC;+CSQ^M
2009-04-16 06:50:19 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:51:21 [1178] [6] DEBUG: AT2[sierra]: --> AT+CBC;+CSQ^M
2009-04-16 06:51:21 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:52:23 [1178] [6] DEBUG: AT2[sierra]: --> AT+CBC;+CSQ^M
2009-04-16 06:52:23 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:53:25 [1178] [6] DEBUG: AT2[sierra]: --> AT+CBC;+CSQ^M
2009-04-16 06:53:25 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:54:27 [1178] [6] DEBUG: AT2[sierra]: --> AT+CBC;+CSQ^M
2009-04-16 06:54:27 [1178] [6] DEBUG: AT2[sierra]: <-- OK
2009-04-16 06:48:29 [1178] [0] INFO: Added logfile
`/var/log/kannel/kannel.log' with level `0'.
2009-04-16 06:48:29 [1178] [0] INFO: Started access logfile
`/var/log/kannel/access.log'.
2009-04-16 06:48:29 [1178] [0] INFO: HTTP: Opening server at port
13000.
2009-04-16 06:48:29 [1178] [0] DEBUG: Started thread 1
(gwlib/fdset.c:poller)
2009-04-16 06:48:29 [1178] [0] DEBUG: Started thread 2
(gwlib/http.c:server_thread)
2009-04-16 06:48:29 [1178] [0] DEBUG: Started thread 3
(gw/bb_http.c:httpadmin_run)
2009-04-16 06:48:29 [1178] [0] DEBUG: starting smsbox connection module
2009-04-16 06:48:29 [1178] [0] INFO: BOXC: 'smsbox-max-pending' not
set, using default (100).
2009-04-16 06:48:29 [1178] [0] DEBUG: Started thread 4
(gw/bb_boxc.c:sms_to_smsboxes)
2009-04-16 06:48:29 [1178] [0] DEBUG: Started thread 5
(gw/bb_boxc.c:smsboxc_run)
2009-04-16 06:48:29 [1178] [0] INFO: Set SMS resend frequency to 60
seconds.
2009-04-16 06:48:29 [1178] [0] INFO: SMS resend retry set to unlimited.
2009-04-16 06:48:29 [1178] [0] DEBUG: smsbox MO concatenated message
handling enabled
2009-04-16 06:48:29 [1178] [0] INFO: DLR rerouting for smsc id
<sierra> disabled.
2009-04-16 06:48:29 [1178] [0] INFO: Added logfile
`/var/log/kannel/sierra.log' with level `0'.
2009-04-16 06:48:29 [1178] [5] DEBUG: Thread 5
(gw/bb_boxc.c:smsboxc_run) maps to pid 1178.
2009-04-16 06:48:29 [1178] [4] DEBUG: Thread 4
(gw/bb_boxc.c:sms_to_smsboxes) maps to pid 1178.
2009-04-16 06:48:29 [1178] [3] DEBUG: Thread 3
(gw/bb_http.c:httpadmin_run) maps to pid 1178.
2009-04-16 06:48:29 [1178] [2] DEBUG: Thread 2
(gwlib/http.c:server_thread) maps to pid 1178.
2009-04-16 06:48:29 [1178] [0] INFO: AT2[sierra]: configuration
doesn't show modemtype. will autodetect
2009-04-16 06:48:29 [1178] [1] DEBUG: Thread 1
(gwlib/fdset.c:poller) maps to pid 1178.
2009-04-16 06:48:29 [1178] [0] DEBUG: Started thread 6
(gw/smsc/smsc_at.c:at2_device_thread)
2009-04-16 06:48:29 [1178] [0] DEBUG: Started thread 7
(gw/bb_smscconn.c:sms_router)
2009-04-16 06:48:29 [1178] [0] INFO:
----------------------------------------
2009-04-16 06:48:29 [1178] [0] INFO: Kannel bearerbox II version
cvs-20090407 starting
2009-04-16 06:48:29 [1178] [0] INFO: MAIN: Start-up done, entering
mainloop
2009-04-16 06:48:29 [1178] [0] DEBUG: AT2[sierra]: start called
2009-04-16 06:48:29 [1178] [6] DEBUG: Thread 6
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 1178.
2009-04-16 06:48:29 [1178] [6] INFO: Logging thread `6' to logfile
`/var/log/kannel/sierra.log' with level `0'.
2009-04-16 06:48:29 [1178] [7] DEBUG: Thread 7
(gw/bb_smscconn.c:sms_router) maps to pid 1178.
2009-04-16 06:48:30 [1178] [5] INFO: Client connected from <127.0.0.1>
2009-04-16 06:48:30 [1178] [5] DEBUG: Started thread 8
(gw/bb_boxc.c:function)
2009-04-16 06:48:30 [1178] [8] DEBUG: Thread 8
(gw/bb_boxc.c:function) maps to pid 1178.
2009-04-16 06:48:30 [1178] [8] DEBUG: Started thread 9
(gw/bb_boxc.c:boxc_sender)
2009-04-16 06:48:30 [1178] [9] DEBUG: Thread 9
(gw/bb_boxc.c:boxc_sender) maps to pid 1178.
2009-04-16 06:49:11 [1178] [2] DEBUG: HTTP: Creating HTTPClient for
`192.168.1.4'.
2009-04-16 06:49:11 [1178] [2] DEBUG: HTTP: Created HTTPClient area
0x8577c80.
2009-04-16 06:49:11 [1178] [3] DEBUG: HTTP: Resetting HTTPClient for
`192.168.1.4'.
2009-04-16 06:49:16 [1178] [8] DEBUG: boxc_receiver: sms received
2009-04-16 06:49:16 [1178] [8] DEBUG: send_msg: sending msg to box:
<127.0.0.1>
2009-04-16 06:49:18 [1178] [3] DEBUG: HTTP: Resetting HTTPClient for
`192.168.1.4'.
2009-04-16 06:50:18 [1178] [1] DEBUG: Timeout for fd:31 appeares.
2009-04-16 06:50:18 [1178] [1] DEBUG: HTTP: Destroying HTTPClient
area 0x8577c80.
2009-04-16 06:50:18 [1178] [1] DEBUG: HTTP: Destroying HTTPClient
for `192.168.1.4'.
2009-04-16 06:48:30 [1189] [0] INFO: Added logfile
`/var/log/kannel/smsbox.log' with level `0'.
2009-04-16 06:48:30 [1189] [0] INFO: Service global sender set as
'16xx7x46xx3'
2009-04-16 06:48:30 [1189] [0] INFO: Logging accesses to
'/var/log/kannel/access.log'.
2009-04-16 06:48:30 [1189] [0] INFO: Started access logfile
`/var/log/kannel/access.log'.
2009-04-16 06:48:30 [1189] [0] INFO: HTTP: Opening server at port
13013.
2009-04-16 06:48:30 [1189] [0] DEBUG: Started thread 1
(gwlib/fdset.c:poller)
2009-04-16 06:48:30 [1189] [0] DEBUG: Started thread 2
(gwlib/http.c:server_thread)
2009-04-16 06:48:30 [1189] [0] INFO: Set up send sms service at port
13013
2009-04-16 06:48:30 [1189] [0] DEBUG: Started thread 3
(gw/smsbox.c:sendsms_thread)
2009-04-16 06:48:30 [1189] [0] DEBUG:
----------------------------------------------
2009-04-16 06:48:30 [1189] [0] DEBUG: Kannel smsbox version
cvs-20090407 starting
2009-04-16 06:48:30 [1189] [3] DEBUG: Thread 3
(gw/smsbox.c:sendsms_thread) maps to pid 1189.
2009-04-16 06:48:30 [1189] [2] DEBUG: Thread 2
(gwlib/http.c:server_thread) maps to pid 1189.
2009-04-16 06:48:30 [1189] [1] DEBUG: Thread 1
(gwlib/fdset.c:poller) maps to pid 1189.
2009-04-16 06:48:30 [1189] [0] DEBUG: dumping group (sendsms-user):
2009-04-16 06:48:30 [1189] [0] DEBUG: <user-allow-ip> = <*.*.*.*>
2009-04-16 06:48:30 [1189] [0] DEBUG: <group> = <sendsms-user>
2009-04-16 06:48:30 [1189] [0] DEBUG: <max-messages> = <5>
2009-04-16 06:48:30 [1189] [0] DEBUG: <username> = <tester>
2009-04-16 06:48:30 [1189] [0] DEBUG: <concatenation> = <true>
2009-04-16 06:48:30 [1189] [0] DEBUG: <password> = <foobar>
2009-04-16 06:48:30 [1189] [0] DEBUG: Started thread 4
(gw/smsbox.c:obey_request_thread)
2009-04-16 06:48:30 [1189] [0] DEBUG: Started thread 5
(gw/smsbox.c:url_result_thread)
2009-04-16 06:48:30 [1189] [0] DEBUG: Started thread 6
(gw/smsbox.c:http_queue_thread)
2009-04-16 06:48:30 [1189] [4] DEBUG: Thread 4
(gw/smsbox.c:obey_request_thread) maps to pid 1189.
2009-04-16 06:48:30 [1189] [5] DEBUG: Thread 5
(gw/smsbox.c:url_result_thread) maps to pid 1189.
2009-04-16 06:48:30 [1189] [0] INFO: Connected to bearerbox at
localhost port 13001.
2009-04-16 06:48:30 [1189] [0] DEBUG: Started thread 7
(gw/heartbeat.c:heartbeat_thread)
2009-04-16 06:48:30 [1189] [6] DEBUG: Thread 6
(gw/smsbox.c:http_queue_thread) maps to pid 1189.
2009-04-16 06:48:30 [1189] [7] DEBUG: Thread 7
(gw/heartbeat.c:heartbeat_thread) maps to pid 1189.
2009-04-16 06:49:16 [1189] [2] DEBUG: HTTP: Creating HTTPClient for
`192.168.1.4'.
2009-04-16 06:49:16 [1189] [2] DEBUG: HTTP: Created HTTPClient area
0x9dfc408.
2009-04-16 06:49:16 [1189] [3] INFO: smsbox: Got HTTP request
</cgi-bin/sendsms> from <192.168.1.4>
2009-04-16 06:49:16 [1189] [3] INFO: sendsms used by <tester>
2009-04-16 06:49:16 [1189] [3] INFO: sendsms
sender:<tester:16xx7x4xx33> (192.168.1.4) to:<16xx9x0xx30>
msg:<hello from 3g modem>
2009-04-16 06:49:16 [1189] [3] DEBUG: Stored UUID
f6765fe2-e2c5-4ccc-9812-312f57742cba
2009-04-16 06:49:16 [1189] [3] DEBUG: message length 19, sending 1
messages
2009-04-16 06:49:16 [1189] [3] DEBUG: Status: 202 Answer: <Sent.>
2009-04-16 06:49:16 [1189] [3] DEBUG: Delayed reply - wait for
bearerbox
2009-04-16 06:49:16 [1189] [0] DEBUG: Got ACK (0) of
f6765fe2-e2c5-4ccc-9812-312f57742cba
2009-04-16 06:49:16 [1189] [0] DEBUG: HTTP: Resetting HTTPClient for
`192.168.1.4'.
2009-04-16 06:50:16 [1189] [1] DEBUG: Timeout for fd:24 appeares.
2009-04-16 06:50:16 [1189] [1] DEBUG: HTTP: Destroying HTTPClient
area 0x9dfc408.
2009-04-16 06:50:16 [1189] [1] DEBUG: HTTP: Destroying HTTPClient
for `192.168.1.4'.
