Thanks Alan,
Manufacturer sent me a PDF file for Siemens TC65. So the CGU-03 must be a clone of that. I've tried leaving modemtype as auto in my config and including modems.conf. device opened speed set to 115200 --> ^M --> AT^M --> AT^M --> AT^M closing device opening device ... and the speed just keeps decreasing i've tried setting the modem type to siemens_tc35 and siemens_m20 with the same result. I cannot open this modem using minicom, i don't receive any errors but i never receive a prompt or any responses to anything i type into minicom. Where should i go from here? Thanks Zamil Date: Mon, 16 Nov 2009 08:57:07 +1300 From: [email protected] To: [email protected] CC: [email protected] Subject: Re: GSM Modem Hi Zamil, Well the good news is that you have a USB serial device. The next step I would take is to grab the GSM AT specs and try talking to it using minicom or similar. Alternatively just config kannel to use ttyUSB0 (using default init strings, etc) and see how you get on. Cheers, Alan Zamil Murji wrote: Dear all, Need some help configuring my modem (found a modem lying in our warehouse - dusted it off and trying it out with Kannel) CGU-03 Terminal from Conel I have no other information on this modem. The website isn't very friendly either, can't find the init strings for this modem. When I plug it into my machine, dmesg returns usb 2-1 FTDI USB Serial Device converter now attached to ttyUSB0 Where should I start debugging, anybody ever configured this modem??? Please help, thanks in advance Zamil -- Alan McNatty, Wellington, New Zealand Catalyst IT Limited <http://www.catalyst.net.nz/> DDI: +64 4 8032201 MOB: +64 21 02950201
