Thank you Pradeep! I have pasted the output, any idea on how to change my Kannel config based on this?
the output for wvdialconf is ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyACM0<*1>: ATQ0 V1 E1 -- OK ttyACM0<*1>: ATQ0 V1 E1 Z -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyACM0<*1>: Modem Identifier: ATI -- Nokia ttyACM0<*1>: Speed 4800: AT -- OK ttyACM0<*1>: Speed 9600: AT -- OK ttyACM0<*1>: Speed 19200: AT -- OK ttyACM0<*1>: Speed 38400: AT -- OK ttyACM0<*1>: Speed 57600: AT -- OK ttyACM0<*1>: Speed 115200: AT -- OK ttyACM0<*1>: Speed 230400: AT -- OK ttyACM0<*1>: Speed 460800: AT -- OK ttyACM0<*1>: Max speed is 460800; that should be safe. ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK On Wed, Nov 18, 2009 at 12:38 PM, Pradeep Sharma < [email protected]> wrote: > you may get the init-string using command “wvdialconf” > > > > > > Pradeep Sharma > ZenMedia Solutions Pvt. Ltd. > Project Office > Ext. 022-44775065 > ------------------------------ > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *INSI mobile > *Sent:* Wednesday, November 18, 2009 12:36 PM > *To:* [email protected] > *Subject:* Init string for Nokia E71 > > > > Does any body know the init string for E71? Please let me know the correct > config. my current config is.. > > > > modemtype = auto > device = /dev/ttyACM0 > group = modems > id = generic > > > bearerbox log is: > > 2009-11-18 12:32:49 [6808] [6] DEBUG: AT2[/dev/ttyACM0]: --> > AT+CNMI=1,2,0,1,0^M > 2009-11-18 12:32:49 [6808] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR > 2009-11-18 12:32:49 [6808] [6] ERROR: AT2[/dev/ttyACM0]: Generic error: > ERROR > 2009-11-18 12:32:49 [6808] [6] ERROR: AT2[/dev/ttyACM0]: Initialization of > device failed. > 2009-11-18 12:32:49 [6808] [6] INFO: AT2[/dev/ttyACM0]: Closing device > 2009-11-18 12:32:49 [6808] [6] ERROR: AT2[/dev/ttyACM0]: Couldn't connect > (retrying in 10 seconds). >
