You need to pass the value on the meta-data field. For example: ....&meta-data=?smpp?my-custom-var=1
(urlencoded of course) Regards, Alex On Wed, Dec 2, 2009 at 9:01 AM, Elton Hoxha <[email protected]> wrote: > Hi guys, > > I`m trying to use kannel for sending ussd request and receiving back using > SMPP. > > my conf for TLV is: > > group = smpp-tlv > name = my-custom-var > tag = 0x0501 > type = integer > length = 2 > smsc-id = test > > Using this I`m able to call my application by dialing ussd shortcodes, but > I`m not able to terminate the session immediately. > > Also the values of ussd parameters take place under the VALUE parameter of > TLV itself which is not present in the above conf. How can I manipulate this > parameter if its not configurable in kannel? > > P.S this is an example I found googling around; > > Field Size Octets Type Description Parameter Tag 2 Integer 0x0501 Length > 2 Integer Length of value part in octets Value 1 Integer This value can > be one of the following values: > > 0 = PSSD Indication > 1 = PSSR Indication > 2 = USSR Request > 3 = USSN Request > > 4 to 15 = Reserved > > 16 = PSSD Response > 17 = PSSR Response > 18 = USSR Confirm > 19 = USSN Confirm > > 20 to 31 = Reserved > 32 to 255 = Vendor specific operations >
