Hi, Please read User's guide end2end. You seem to have a fundamental lack of understanding how kannel works, more than i can detail in an email.
Kannel is bearerbox + smsbox +wapbox (if you need it). You always need bearerbox and optional one or both of the other 2. You start bearerbox and then the components you need. What is /etc/init.d/kannel start ??? and then you start bearerebox by hand? Come on. To answer your questions: In group smsc: smsc = at at is the smsc driver (at.c). Each smsc needs a special driver to communicate. In your previous smskannel.conf you had: smsc = Pradeep which doesn't exist as a driver. Where do you use smskannel.conf? You seem to be using smsboxkannel.conf, not smskannel.conf. Nikos ----- Original Message ----- From: PradeepChandar Rajarathnam To: [email protected] Cc: [email protected] Sent: Monday, March 22, 2010 3:27 PM Subject: Re: Re: Error: Could not decode PDU to a message Hello, First I start the Kannel by /etc/init.d/kannel start then I run the bearer box by ./bearerbox bearerboxkannel.conf then the smsbox by ./smsbox smsboxkannel.conf Please let me know what is wrong with the smskannel.conf and what do you mean by driver? Thanks, PradeepChandar.R ----- Original Message ----- From: PradeepChandar Rajarathnam To: [email protected] Cc: [email protected] Sent: Monday, March 22, 2010 3:06 PM Subject: Re: Re: Error: Could not decode PDU to a message >Hi Nikos, > > I am not able to figure out what is wrong with the smskannel.conf and I installed the statserial, what do you mean by "driver". I am connecting to the port to which it shows as Modem in the dmesg and even then I get this error. Kindly help what needs to be done. > >There is nothing like driver available for Linux in the Sony Ericsson site. They just have a PC suite which is for Windows only. What do you mean by Driver. Kindly clarify. > >Please let me know what should be corrected in the smskannel to make it working so that, it redirects the HTTP response as SMS message to the sender. > >Thanks, >PradeepChandar.R > >On Fri, 19 Mar 2010 20:03:40 +0530 wrote >> >Hi, > >How do you run the boxes? smskannel.conf is wrong. >There is no driver "Pradeep" in kannel. > >BR, >Nikos > >----- Original Message ----- >From: >PradeepChandar Rajarathnam > >To: [email protected] >Sent: Friday, March 19, 2010 3:01 >PM >Subject: Error: Could not decode PDU to a >message > >>Hello, >> >>I try to push data from the SMSC & send back >to the sender, I am getting the error " Couldnot decode "Could not decode PDU >to a message". >> >>I had gone through the mailing list and tried the >possible options suggested, nothing worked. I am using W810i as modem. > >> >>Please find the attached log file and kindly >help. >> >>Thanks, >>PradeepChandar.R >> > > > > > >
