Hi Andy, please use this configuration and check.
#-----------------------------CONFIGFile group=core admin-port=13000 admin-password=adminpass admin-deny-ip="" admin-allow-ip="192.168.0.*" wapbox-port=13002 smsbox-port=13003 wdp-interface-name="*" log-file="/var/log/kannel/bearerbox.log" box-deny-ip="" box-allow-ip="192.168.0.*" group=smsbox bearerbox-host=localhost sendsms-chars="0123456789+-" global-sender=123456 access-log="kannel.access" log-file="smsbox.log" log-level=0 sendsms-port=13131 group=smsc smsc=smpp host=192.168.0.215 port=2775 receive-port=2775 smsc-username="smppclient1" smsc-password="password" system-type="VMA" smsc-id="TestSMSC" group=sendsms-user username=testuser password=testpass group=sms-service keyword=default text="Noactionspecified" catch-all=true Regards, ------------ Kiran Reddy +91-9036971573 Http://www.Uniceltech.com -------Original Message------- From: Andy Beak <[email protected]> To: Nikos Balkanas <[email protected]> Cc: Kiran Reddy <[email protected]>, [email protected] Subject: Re: smsbox_list is empty Sent: May 11 '10 9:21am Hi, Thanks for this reply Nikos. I had also read your reply to somebody else about routing so I checked the source you mention and saw how that error is produced. Thanks for the tip - the bearerbox is now recognizing the smsbox and as soon as it connects the messages stop. Thanks, Andy On 10/05/2010 09:48 PM, Nikos Balkanas wrote: > Hi, > > gw/bb_boxc.c considers new smsbox connections unroutable until they > are identified or an MT is sent from them. I don't know what > identification it means, but why don't you try to send an MT to FAKE > smsc through your smsbox to start with? > > BR, > Nikos > ----- Original Message ----- From: "Andy Beak" <[email protected]> > To: "Kiran Reddy" <[email protected]> > Cc: <[email protected]> > Sent: Monday, May 10, 2010 7:21 PM > Subject: Re: smsbox_list is empty > > >> Hi, >> >> Thanks for the swift reply! I wasn't expecting that :) >> >> My conf file is listed below. >> >> I commented out the fake smsc because I thought it would be better to >> test with an smsc emulator. >> >> When I connect the bearerbox it starts saying WARNING: smsbox_list >> empty! >> >> When I connect the smsbox it kicks off hundreds of messages saying >> [4] INFO: Starting to service <No action specified> from <123456> to >> <123456> >> >> >> >> #-----------------------------CONFIG File >> group = core >> admin-port = 13000 >> admin-password = adminpass >> admin-deny-ip = "" >> admin-allow-ip = "192.168.0.*" >> wapbox-port = 13002 >> smsbox-port = 13003 >> wdp-interface-name = "*" >> log-file = "/var/log/kannel/bearerbox.log" >> box-deny-ip = "" >> box-allow-ip = "192.168.0.*" >> >> #group = wapbox >> #bearerbox-host = localhost >> #log-file = "/var/log/kannel/wapbox.log" >> >> group = smsbox >> bearerbox-host = localhost >> sendsms-chars = "0123456789 +-" >> global-sender = 123456 >> access-log = "kannel.access" >> log-file = "smsbox.log" >> log-level = 0 >> sendsms-port = 13131 >> smsbox-id = "TestSMSbox" >> >> # group = smsc >> # smsc = fake >> # port = 10002 >> # connect-allow-ip = "*.*.*.*" >> >> group = smsc >> smsc = smpp >> host = 192.168.0.215 >> port = 2775 >> receive-port = 2775 >> smsc-username = "smppclient1" >> smsc-password = "password" >> system-type = "VMA" >> smsc-id = "TestSMSC" >> >> group = sendsms-user >> username = testuser >> password = testpass >> >> group = sms-service >> keyword = default >> text = "No action specified" >> catch-all = true >> >> group = smsbox-route >> smsbox-id = "TestSMSbox" >> smsc-id = "TestSMSC" >> >> >> >> >> On 10/05/2010 05:42 PM, Kiran Reddy wrote: >>> Hi Andy, >>> >>> Please add conf file. >>> >>> >>> Regards, >>> ------------ >>> Kiran Reddy >>> >>> >>> >>> -------Original Message------- >>> From: Andy Beak<[email protected]> >>> To: [email protected] >>> Subject: smsbox_list is empty >>> Sent: May 10 '10 9:08pm >>> >>> Hi, >>> >>> I've searched the archive and can't find a solution for the error >>> "[15629] [7] WARNING: smsbox_list empty!". >>> >>> I originally set my config up from scratch by reading through the >>> documentation. >>> >>> I have tried using the example config that ships with Kannel but >>> it also >>> gives the same error. >>> >>> I'm using the SMSC emulator from selenium software to set up an >>> smpp 3.4 >>> smsc in the kannel.conf >>> >>> Could anybody shed some light on this please? >>> >>> Thanks, >>> Andy >>> >>> >>> >>> >> > >
