Thanks,
For clearing this up, Rene.
BR,
Nikos
----- Original Message -----
From: "Rene Kluwen" <[email protected]>
To: "'Nikos Balkanas'" <[email protected]>; <[email protected]>
Cc: <[email protected]>
Sent: Friday, May 28, 2010 3:42 PM
Subject: RE: kannel delivery report
The open source version is stable enough to use it in production.
I use it for a couple of years myself now and others too.
Never had a problem with it.
== Rene
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf
Of Nikos Balkanas
Sent: vrijdag 28 mei 2010 8:00
To: [email protected]
Cc: [email protected]
Subject: Re: kannel delivery report
Hi,
The suggestions I made will replace your SMPP server (more likely proxy).
For the commercial SMPPbox you need to contact Stipe ([email protected]) or
download the opensource SMPPbox from
http://www.chimit.nl/kannel/smppbox.tar. Bear in mind that the opensource
has not been tested in production, yet.
BR,
Nikos
----- Original Message -----
From: "Budi wibowo" <[email protected]>
To: "Nikos Balkanas" <[email protected]>; <[email protected]>
Sent: Friday, May 28, 2010 8:49 AM
Subject: Re: kannel delivery report
Hi nikos
Assume I don't to change anything on smpp server so addon option is more
suitable for me. Where I can the add ons?
Thx
------Original Message------
From: Nikos Balkanas
To: budi wibowo
To: [email protected]
Subject: Re: kannel delivery report
Sent: May 28, 2010 11:36
Hi,
You cannot pass through the exact PDU. But you can use kannel's dlr-url
feature to pass important parameters you want from it (for a list read
User's guide). For this to work SMPPServer should have an HTTP interface.
Another option is to look into SMPPBox. It will handle DLRs and exists
both
as a commercial add-on provided by Stipe, or as an open-source addition
to
bearerbox, however, its production stability is unknown.
BR,
Nikos
----- Original Message -----
From: budi wibowo
To: [email protected]
Sent: Friday, May 28, 2010 3:45 AM
Subject: kannel delivery report
hi list
i have kannel installed and used as sender-ID modifier, topology as
follows
client------->SMPPServer--->kannel-------->SMSC
1. client send sms to SMPPServer,
2. SMPPServer send sms to kannel, kannel modify sender-ID and send back
to
SMPP Server
3. SMPPSever send sms to SMSC
in this scenario SMPPServer will always get DLR 100% from kannel, is
there
any mechanism on kannel to passthrough DLR from SMSC , so i can get real
DLR
from SMSC
TIA
budi
