Re: Urgent! HELP!

Tue, 01 Jun 2010 19:23:30 -0700 

Hi,
It seems that your problem is with your CNMI value. This is modem/manufacturer specific. Try the CNMI=0,0,0,0,1 that the modem gives you. If that doesn't work, try some different values, examples can be found in modems.conf. Or run wvdialconf. You can remove CMEE. 

BR,
Nikos

----- Original Message ----- 
From: "Peter Lum" <[email protected]>

To: "'Nikos Balkanas'" <[email protected]>; <[email protected]>
Sent: Wednesday, June 02, 2010 4:10 AM
Subject: RE: Urgent! HELP!



Hi

I typed AT+CMNI? and got

+CNMI: 0,0,0,0,1

I typed AT&V and got
ACTIVE PROFILE:
E0 Q0 V1 X4 &C1 &D2 &S0 \Q0
S0:000 S3:013 S4:010 S5:008 S6:000 S7:060 S8:000 S10:002 S18:000
+CBST: 7,0,1
+CRLP: 61,61,78,6
+CR: 0
+FCLASS: 0
+CRC: 0
+CMGF: 0
+CNMI: 0,0,0,0,1
+ILRR: 0
+IPR: 0
+CMEE: 1
^SMGO: 0,0
+CSMS: 0,1,1,1
^SACM: 0,"000000","000000"
^SLCC: 0
^SCKS: 0,1
+CREG: 0,1
+CLIP: 0,2
+CAOC: 0
+COPS: 0,0,"SGP M1-3GSM"
+CGSMS: 3

Also, I am able to send SMS via minicom

Debug mode kannel.log
AT2[HSSMSC1]: start called
2010-06-02 08:53:51 [30416] [6] DEBUG: Thread 6
(gw/smsc/smsc_at.c:at2_device_thread) maps to pid 30416.
2010-06-02 08:53:51 [30416] [8] DEBUG: Thread 8
(gw/bb_store_file.c:store_dumper) maps to pid 30416.
2010-06-02 08:53:51 [30416] [6] INFO: AT2[HSSMSC1]: trying to use speed
<115200> from modem definition
2010-06-02 08:53:51 [30416] [7] DEBUG: Thread 7
(gw/bb_smscconn.c:sms_router) maps to pid 30416.
2010-06-02 08:53:51 [30416] [6] INFO: AT2[HSSMSC1]: opening device
2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message
(0x951e478 vs 0x951e478)
2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued.
2010-06-02 08:53:51 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened. Telnet
mode = 0
2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message
(0x95245d8 vs 0x951e478)
2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued.
2010-06-02 08:53:51 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened
2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message
(0x95431f0 vs 0x951e478)
2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued.
2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message
(0x9555000 vs 0x951e478)
2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued.
2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message
(0x951e478 vs 0x951e478)
2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued.

2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: time to sleep 30.00 
secs.

2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: gwlist_len = 4
2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message
(0x95245d8 vs 0x95245d8)
2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued.
2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message
(0x95431f0 vs 0x95245d8)
2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued.
2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message
(0x9555000 vs 0x95245d8)
2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued.
2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message
(0x951e478 vs 0x95245d8)
2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued.
2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: handling message
(0x95245d8 vs 0x95245d8)
2010-06-02 08:53:51 [30416] [7] DEBUG: Routing failed, re-queued.

2010-06-02 08:53:51 [30416] [7] DEBUG: sms_router: time to sleep 30.00 
secs.

2010-06-02 08:53:51 [30416] [6] INFO: AT2[HSSMSC1]: speed set to 115200
2010-06-02 08:53:51 [30416] [6] DEBUG: AT2[HSSMSC1]: --> ^M
2010-06-02 08:53:52 [30416] [5] INFO: Client connected from <127.0.0.1>
2010-06-02 08:53:52 [30416] [5] DEBUG: Started thread 9
(gw/bb_boxc.c:function)

2010-06-02 08:53:52 [30416] [9] DEBUG: Thread 9 (gw/bb_boxc.c:function) 
maps

to pid 30416.
2010-06-02 08:53:52 [30416] [9] DEBUG: Started thread 10
(gw/bb_boxc.c:boxc_sender)

2010-06-02 08:53:52 [30416] [10] DEBUG: Thread 10 
(gw/bb_boxc.c:boxc_sender)

maps to pid 30416.
2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT^M
2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK
2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: Closing device
2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: speed is 115200
2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: opening device
2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened. Telnet
mode = 0
2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened
2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: Logging in
2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: init device
2010-06-02 08:53:53 [30416] [6] INFO: AT2[HSSMSC1]: speed set to 115200
2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> ATZ^M
2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK
2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT^M
2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK
2010-06-02 08:53:53 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT&F^M
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> ATE0^M
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- ATE0
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT\Q3^M
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CPIN?^M
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- +CPIN: READY
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CMGF=0^M
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CSMS=?^M
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- +CSMS: (0,1)
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK
2010-06-02 08:53:54 [30416] [6] INFO: AT2[HSSMSC1]: Phase 2+ is supported
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: --> AT+CSMS=1^M
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- +CSMS: 1,1,1
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- OK
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: -->
AT+CNMI=2,1,0,0,0;+CMEE=2^M
2010-06-02 08:53:54 [30416] [6] DEBUG: AT2[HSSMSC1]: <-- ERROR
2010-06-02 08:53:54 [30416] [6] ERROR: AT2[HSSMSC1]: Generic error: ERROR
2010-06-02 08:53:54 [30416] [6] ERROR: AT2[HSSMSC1]: Initialization of
device failed.
2010-06-02 08:53:54 [30416] [6] INFO: AT2[HSSMSC1]: Closing device
2010-06-02 08:53:54 [30416] [6] ERROR: AT2[HSSMSC1]: Couldn't connect
(retrying in 10 seconds).
2010-06-02 08:54:04 [30416] [6] INFO: AT2[HSSMSC1]: opening device
2010-06-02 08:54:04 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened. Telnet
mode = 0
2010-06-02 08:54:04 [30416] [6] DEBUG: AT2[HSSMSC1]: device opened
2010-06-02 08:54:04 [30416] [6] INFO: AT2[HSSMSC1]: Logging in
2010-06-02 08:54:05 [30416] [6] INFO: AT2[HSSMSC1]: init device
2010-06-02 08:54:05 [30416] [6] INFO: AT2[HSSMSC1]: speed set to 115200

Any idea what's going on?


Thanks!

-----Original Message-----
From: Nikos Balkanas [mailto:[email protected]]
Sent: 02 June 2010 08:39
To: [email protected]; [email protected]
Subject: Re: Urgent! HELP!

Hi,

As Rene stated, ALWAYS post debug level logs to this group. Lastly type
AT+CNMI=? to your modem using minicom or other serial software to see what
modes it supports. Or you can get wvdialconf to get a working init-string.

BR,
Nikos

----- Original Message ----- 
From: "Rene Kluwen" <[email protected]>

To: <[email protected]>; <[email protected]>
Sent: Tuesday, June 01, 2010 8:04 PM
Subject: RE: Urgent! HELP!



What do you get if you set log-level to 'debug' (0)?
Do you see which command exactly gives the error?

Here, you can find an overview of possibly possible init strings:
http://alumni.ipt.pt/~pmad/s35i_c35i_m35i_atc_commandset_v01.pdf.

== Rene


-----Original Message-----

From: [email protected] [mailto:[email protected]] On 
Behalf

Of [email protected]
Sent: dinsdag 1 juni 2010 17:30
To: [email protected]
Subject: Urgent! HELP!

Hi

I have 3 days trying to resolved this and has even replaced my GSM
modem but still unresolved...

Anyone knows the init-string for the GSM modem MC37i? (cinterion mc37i
or siemens MC37i)

I tried many variations of CMNI=, etc but still couldn't get Kannel to
run smoothly.

This is my latest:
group = modems
id = siemens_m37i
name = "Siemens M37i"
detect-string = "Cinterion"
detect-string2 = "MC37i"
speed= 115200
#init-string = "AT+CNMI=2,0,0,2,1;+CMGF=0;+CMEE=2"
init-string = "AT+CNMI=2,1,0,0,0;+CMEE=2"
enable-hwhs = "AT\\Q3"
#keepalive-cmd = "AT+CBC;+CSQ"


I keep getting this error inj kannel.log

opening device
2010-06-01 23:18:50 [12804] [6] INFO: AT2[HSSMSC1]: Logging in
2010-06-01 23:18:50 [12804] [6] INFO: AT2[HSSMSC1]: init device
2010-06-01 23:18:50 [12804] [6] INFO: AT2[HSSMSC1]: speed set to 115200
2010-06-01 23:18:51 [12804] [6] INFO: AT2[HSSMSC1]: Phase 2+ is supported
2010-06-01 23:18:51 [12804] [6] ERROR: AT2[HSSMSC1]: Generic error: ERROR
2010-06-01 23:18:51 [12804] [6] ERROR: AT2[HSSMSC1]: Initialization of
device failed.
2010-06-01 23:18:51 [12804] [6] INFO: AT2[HSSMSC1]: Closing device
2010-06-01 23:18:51 [12804] [6] ERROR: AT2[HSSMSC1]: Couldn't connect
(retrying in 10 seconds).
2010-06-01 23:19:01 [12804] [6] INFO: AT2[HSSMSC1]: opening device
2010-06-01 23:19:01 [12804] [6] INFO: AT2[HSSMSC1]: Logging in
2010-06-01 23:19:02 [12804] [6] INFO: AT2[HSSMSC1]: init device
2010-06-01 23:19:02 [12804] [6] INFO: AT2[HSSMSC1]: speed set to 115200


HELP!! HELP!!































					Reply via email to