Please address list. Do not send me personnals again.
First upgrade to latest svn. 1.4.1 is ~4 yrs old.
What is going on here? I see smscs op1, op2 & op3 configured, and traffic is
coming from vodacom, cct & tigo.
You also have a blank line in op3 definition that shouldn't be there. I am
surprised that bb even starts.
You get matches on M5, and rejections on J, while not having any
sms-services configured on them.
Never send logs without the right configuration.
Lastly, who are you, Eric or Marc?
I see vodacom doing all the work. Cct is just sitting it out not not doing
anything, and tigo cannot send out anything. The answers you didn't get are
because of tigo's failures. You need to isolate tigo and run some tests with
just this one and talk with your ISP.
There are also no delays from kannel. Match bb logs & access logs. You send
responses at the same second you receive requests. Any delays from the
moment you send response are the SMSC's responsibility (vodacom). Talk to
them if you think that they are slow.
Nikos
----- Original Message -----
From: Marc ANDREAS
To: Nikos Balkanas
Sent: Friday, June 25, 2010 12:15 AM
Subject: Re : Mutli operators with Kannel
Hi Nikos,
Thank you again for your time. You're really kind.
I have 3 smsc connected to my kannel and see attached log. I didn't receive
the last 2 SMS from Kannel.
I'm using Mobile for MO.
The problem happens only when I connect more than one operator. So I need to
understand what is the good why to push SMS without delay of failure.
Even sendsms from website si not working.
I really need help otherwise I'll loose my job. Please help.
Regards,
Eric
De : Nikos Balkanas <[email protected]>
Γ€ : Marc ANDREAS <[email protected]>
Cc : [email protected]
EnvoyΓ© le : Jeu 24 juin 2010, 16h 15min 16s
Objet : Re: Mutli operators with Kannel
1) Still haven't answered this one. Is the SMS sent from the /sendsms HTTP
interface (MT, push)? Or is it sent by a mobile (MO)?
I am assuming that you are referring to MOs.
I can tell you forefront that your problem is not kannel's. You need to
debug your system. Probably your web-server is delaying replies. Please post
detailed relevant bb &smsbox log of an attempt to a service that didn't
return anything, or was 2 late.
Bear in mind that you don't have a default service for all as required. You
should include another default service without allowed-receiver-prefix. If
you send an MO from 41344 you will get nothing in response. If you are
referring to MOs use allowed-prefix, instead of allowed-receiver-prefix.
Both sender and destination are the same in MOs and sender is surely
defined.
BR,
Nikos
----- Original Message ----- From: Marc ANDREAS
To: Nikos Balkanas
Cc: [email protected]
Sent: Thursday, June 24, 2010 5:29 PM
Subject: Re : Mutli operators with Kannel
1) You mention "when I send". Are you referring to push SMS (MT)? Your
configuration seems to be more service (MO) oriented.
I mean when People send SMS to Kannel.
2) If you are talking about MTs, what is the delay you are referring to? DLR
receipts?
After sending SMS to Kannel i don't receive any SMS from it.
3) If you are talking about MOs, what is your fastest smsc? Is it service
dependent?
How can I know the fasted smsc? All of them are working almost with the same
speed.
Regards.
De : Nikos Balkanas <[email protected]>
Γ€ : Marc ANDREAS <[email protected]>
Cc : [email protected]
EnvoyΓ© le : Jeu 24 juin 2010, 15h 04min 31s
Objet : Re: Mutli operators with Kannel
Hi,
Still haven't answered my questions. Please do. Since your English is not
fluent, please use the numbers in the list. Unfortunately my french is
poorer than your English.
What is a JOK?
BR,
Nikos
----- Original Message ----- From: Marc ANDREAS
To: Nikos Balkanas
Cc: [email protected]
Sent: Thursday, June 24, 2010 4:33 PM
Subject: Re : Mutli operators with Kannel
Hi Nikos,
I understand your mean and sorry again.
I'm a content provider with info, meteo, jok,.... in french. So you
understand why my english is bad.
I negotiated SMPP connection to all operators in my country and i got them.
What i need is People send for example JOK to 42333 and the application
return back one JOK.
When only one operator is configured People received JOK very quicky.
But when i configure 3 operators in my conf file. Sometime People receive
JOK, sometime they don't receive that. But they always receive DLR.
How can I do to have think working properly with those 3 operators at the
same time?
Regards,
Marc
De : Nikos Balkanas <[email protected]>
Ξ� : Marc ANDREAS <[email protected]>
EnvoyΞΉ le : Jeu 24 juin 2010, 14h 13min 31s
Objet : Re: Mutli operators with Kannel
Hi Marc,
Normally I don't respond to mail from unknown people, but you look like a
serious person, who doesn't want to waste my time. Next time please consider
that the list is a more appropriate place, since others can benefit and
offer insight as well.
Please describe context of your problem:
1) You mention "when I send". Are you referring to push SMS (MT)? Your
configuration seems to be more service (MO) oriented.
2) If you are talking about MTs, what is the delay you are referring to? DLR
receipts?
3) If you are talking about MOs, what is your fastest smsc? Is it service
dependent?
BR,
Nikos
----- Original Message ----- From: Marc ANDREAS
To: Nikos Balkanas
Sent: Thursday, June 24, 2010 3:06 PM
Subject: Mutli operators with Kannel
Hi Nikos,
First of all I'm really sorry to send you a private email.
I want you to help me on my Kannel configuration as I'm very down and
blocked now.
I'm becoming a content provider in my country where I have SMPP accounts to
all operators (4).
When I configure only one operator in group = smsc i get very quicky reply
from Kannel when I send SMS.
But when I configure all operators I'm not able to get content from my
application.
Can you show me how I can configure more than 1 operator with Kannel to have
my application running quickly ?
Attached is my kannel configuration file I used.
If you need log tell me what i'll send it as i'm really blocked.
Regards,
Marc
