Hello altogether, now finally my modem is working:
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- ttyUSB0<*1>: failed with 9600 baud, next try: 115200 baud ttyUSB0<*1>: ATQ0 V1 E1 -- OK ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB0<*1>: Modem Identifier: ATI -- WAVECOM MODEM ttyUSB0<*1>: Speed 230400: AT -- x ttyUSB0<*1>: Speed 230400: AT -- x ttyUSB0<*1>: Speed 230400: AT -- x ttyUSB0<*1>: Max speed is 115200; that should be safe. ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK But when I am starting bearerbox as su, I got the following output: 2010-07-09 15:12:36 [5905] [8] DEBUG: Thread 8 (gw/bb_udp.c:udp_receiver) maps to pid 5905. 2010-07-09 15:12:36 [5905] [0] INFO: MAIN: Start-up done, entering mainloop 2010-07-09 15:12:36 [5905] [0] DEBUG: AT2[/dev/ttyUSB0]: start called 2010-07-09 15:12:36 [5905] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps to pid 5905. 2010-07-09 15:12:36 [5905] [9] DEBUG: Thread 9 (gw/bb_udp.c:udp_sender) maps to pid 5905. 2010-07-09 15:12:36 [5905] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) maps to pid 5905. 2010-07-09 15:12:36 [5905] [10] DEBUG: Thread 10 (gw/bb_udp.c:udp_receiver) maps to pid 5905. 2010-07-09 15:12:36 [5905] [3] DEBUG: Thread 3 (gw/bb_http.c:httpadmin_run) maps to pid 5905. 2010-07-09 15:12:36 [5905] [11] DEBUG: Thread 11 (gw/bb_udp.c:udp_sender) maps to pid 5905. 2010-07-09 15:12:36 [5905] [6] DEBUG: Thread 6 (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 5905. 2010-07-09 15:12:36 [5905] [6] DEBUG: AT2[/dev/ttyUSB0]: detecting modem type 2010-07-09 15:12:36 [5905] [6] INFO: AT2[/dev/ttyUSB0]: opening device 2010-07-09 15:12:36 [5905] [6] ERROR: AT2[/dev/ttyUSB0]: open failed! ERRNO=13 2010-07-09 15:12:36 [5905] [6] ERROR: System error 13: Permission denied 2010-07-09 15:12:36 [5905] [6] ERROR: AT2[/dev/ttyUSB0]: Couldn't connect (retrying in 10 seconds). What about this permission denied and the errorno 13? Can anybody help me? Regards, Helge
<<attachment: hw.vcf>>
