Hi,
That's fine, but I asked you to post relevant bb logs from modem
initailaization, which I don't see. Have you read User's guide about it?
BR,
Nikos
----- Original Message -----
From: "Dlamini Langa Phillip" <[email protected]>
To: "Nikos Balkanas" <[email protected]>
Cc: <[email protected]>
Sent: Monday, August 09, 2010 12:58 PM
Subject: RE: Modem Nokia N73 problem
Hi
I think did everything mentioned wvdial.conf, the modem gets initialised
but doesnot give me IP to connect to internet. System: RED HAT LINUX
Desktop with modem Nokia N73 through USB cable.
Here is my wdial.conf:, created with wvdialconf create
FIRST STEP:
I run this command on the terminal
# sudo /sbin/modprobe usbserial vendor=0x0421 product=0x0486
SECOND STEP:
I run the command :wvdialconf create , on the terminal , it showed the
output as following,
[r...@localhost ~]# wvdialconf create
Scanning your serial ports for a modem.
Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
TtyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Nokia
ttyUSB0<*1>: Speed 4800: AT -- OK
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Speed 19200: AT -- OK
ttyUSB0<*1>: Speed 38400: AT -- OK
ttyUSB0<*1>: Speed 57600: AT -- OK
ttyUSB0<*1>: Speed 115200: AT -- OK
ttyUSB0<*1>: Speed 230400: AT -- OK
ttyUSB0<*1>: Speed 460800: AT -- OK
ttyUSB0<*1>: Max speed is 460800; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found an USB modem on /dev/ttyUSB0.
Modem configuration written to create.
ttyUSB0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
THIRD STEP:
I THEN PASTE THE BELOW SCRIPT IN THE FILE etc/wvdial.conf
[Dialer Defaults]
Modem = /dev/ ttyUSB0
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Phone = *99***1#
Username = gp
Password = gp
Stupid Mode = 1
FOURTH STEP
I then open terminal with root permissions and run the command :
wvdial.
the output was as follows :
[r...@localhost ~]# wvdial
--> WvDial: Internet dialer version 1.53.0
--> Warning: section [Dialer Default] does not exist in wvdial.conf..
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
~[7f...@!}!} } }2}...@#}!}$}%\}"}&} }*} } g}%~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Mon Aug 9 11:36:29 2010
--> pid of pppd: 4855
The problems it stop here and I DON'T KNOW WHY? OR THE PHONE IS NOT
COMPACTIBLE TO BE USED AS A M
-----Original Message-----
From: Nikos Balkanas [mailto:[email protected]]
Sent: Sunday, August 08, 2010 8:22 PM
To: Dlamini Langa Phillip; [email protected]
Subject: Re: Modem Nokia N73 problem
Hi,
Please never truncate threads. All past information is lost. What is
your
problem? Post detailed relevant bb logs of your modem initialization.
BR,
Nikos
----- Original Message -----
From: Dlamini Langa Phillip
To: [email protected]
Sent: Sunday, August 08, 2010 12:24 PM
Subject: Modem Nokia N73 problem
Hi
I to use my Nokia N73 as modem for the kannel sms gateway. I want to
send an
sms through the modem and anyone with the idea of what is happening.
Please
help and this are the when using wvdial steps.
Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
Phone = *99#
Modem = /dev/ttyUSBO
Username = gp
Password = gp
Baud = 460800
Stupid Mode=1
wvdial result
--> WvDial: Internet dialer version 1.53
--> Warning : section [Dialer Default] does not exist in wvdial.conf
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
~[7f...@!}!} } }2}...@#}!}$}%\}"}&} }*} } g}%~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sun Aug 8 09:56: 14 2010
--> pid of pppd: 4864
DISCLAIMER
This email and any files transmitted with it are confidential and
intended
solely for the use of the individual or entity to whom they are
addressed.
If you have received this email in error please notify the
[email protected], then delete the email and destroy any copies
of
it. Please note that any views or opinions presented in this email are
solely those of the author and do not necessarily represent those of
Swaziland Posts & Telecommunication Corporation (SPTC) or any of its
subsidiaries or associated companies.
WARNING: Computer viruses can be transmitted via email. The recipient
should
check this email and any attachments for the presence of viruses.
Swaziland
Posts & Telecommunication Corporation (SPTC) accepts no liability for
any
damage caused by any virus transmitted by this email. E-mail
transmission
cannot be guaranteed to be secure or error-free as information could be
intercepted, corrupted, lost, destroyed, arrive late or incomplete, or
contain viruses. The sender therefore does not accept liability for any
errors or omissions in the contents of this message, which arise as a
result
of e-mail transmission.
Swaziland Posts & Telecommunication Corporation,
Phutfumani Building, Mahlokohla Street, Mbabane, Swaziland,
www.sptc.co.sz
DISCLAIMER
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the
[email protected], then delete the email and destroy any copies of
it. Please note that any views or opinions presented in this email are
solely those of the author and do not necessarily represent those of
Swaziland Posts & Telecommunication Corporation (SPTC) or any of its
subsidiaries or associated companies.
WARNING: Computer viruses can be transmitted via email. The recipient should
check this email and any attachments for the presence of viruses. Swaziland
Posts & Telecommunication Corporation (SPTC) accepts no liability for any
damage caused by any virus transmitted by this email. E-mail transmission
cannot be guaranteed to be secure or error-free as information could be
intercepted, corrupted, lost, destroyed, arrive late or incomplete, or
contain viruses. The sender therefore does not accept liability for any
errors or omissions in the contents of this message, which arise as a result
of e-mail transmission.
Swaziland Posts & Telecommunication Corporation,
Phutfumani Building, Mahlokohla Street, Mbabane, Swaziland,
www.sptc.co.sz
