Please post detailed bb logs from initialization with sim-buffering &
message-storage and indicate their values for each log.
BR,
Nikos
----- Original Message -----
From: Pratik Shrestha
To: Nikos Balkanas
Cc: Emmanuel CHANSON ; Rene Kluwen ; [email protected]
Sent: Friday, August 27, 2010 6:27 AM
Subject: Re: SMS receive not working with nokia n70
Dear Nikos,
I tried two init strings,
AT+CNMI=0,2,0,0,0
and
AT+CMGL="ALL"
But the modem did not start.
Then I tried sim-buffering alone. It gives the error "couldn't parse all
memory locations : 0:''. When I use sim-buffering and message-storage at
once, the modem does not initialize. And when I use only message-storage,
the modem initializes but it does not receive sms.
Rgds,
Pratik
2010/8/27 Nikos Balkanas <[email protected]>
Did you try sim-buffering and message-storage that I suggested?
BR,
Nikos
----- Original Message ----- From: Pratik Shrestha
To: Emmanuel CHANSON ; Nikos Balkanas ; Rene Kluwen ; [email protected]
Sent: Friday, August 27, 2010 5:43 AM
Subject: Re: SMS receive not working with nokia n70
Dear All,
Thanks.
I am still trying it but not yet working. Before I used Nokia 30 which
worked very well. Then I tried Telular Phonecell Sx5e but I could not make
it work. And then I came to Nokia n70 for which I am not receiving sms
though sending is ok. With the last post from Emmanuel, I think the success
is hard.
I am not sure it is ok to discuss in this thread or not. I want to ask if
anybody of you have experience in Telular with Kannel.
Thanks.
Pratik
On Fri, Aug 27, 2010 at 5:34 AM, Emmanuel CHANSON
<[email protected]> wrote:
"For newer models of Nokia phones, e.g., N70, N80, the "+CNMI" is not
supported, and you have no way of detecting incoming SMS."
from this url
I noticed that many nSeries phones does not support AT+CNMI command.
BR,
Emmanuel
2010/8/26 Nikos Balkanas <[email protected]>
Well, it is in the UG I was referring to. But it is not a cure all. Several
Nokia phones are known not to support it.
BR,
Nikos
----- Original Message ----- From: "Rene Kluwen" <[email protected]>
To: "'Nikos Balkanas'" <[email protected]>; "'Pratik Shrestha'"
<[email protected]>; <[email protected]>
Sent: Thursday, August 26, 2010 5:16 PM
Subject: RE: SMS receive not working with nokia n70
To be exact: The AT+CNMI gsm command is missing from your init string.
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf
Of Nikos Balkanas
Sent: Thursday, 26 August, 2010 12:09
To: Pratik Shrestha; [email protected]
Subject: Re: SMS receive not working with nokia n70
Hi,
You probably have wrong init-string. There is a special section in UG about
modem initialization. You may need to configure sim-buffering and
message-storage.
BR,
Nikos
----- Original Message ----- From: Pratik Shrestha
To: [email protected]
Sent: Thursday, August 26, 2010 12:01 PM
Subject: SMS receive not working with nokia n70
Dear All,
I have configured nokia 70 to work. Sending sms through kannel (web
interface) is ok. But kannel is not receiving the sms when I send sms to
that phone (nokia n70). The phone receives the sms and beeps but nothing
happens to kannel. Actually I want kannel to receive that sms and post to a
link I have configured in its configuration file.
My configuration file is
group = core
admin-port = 13000
admin-password = bar
admin-deny-ip = "*.*.*.*"
admin-allow-ip = "127.0.0.1;192.168.0.*"
smsbox-port = 13003
wapbox-port = 13004
wdp-interface-name = "*"
log-file = "/var/log/kannel/bearerbox.log"
access-log="/var/log/kannel/access.log"
box-deny-ip = "*.*.*.*"
box-allow-ip = "127.0.0.1;192.168.0.*"
group = wapbox
bearerbox-host = localhost
log-file = "/var/log/kannel/wapbox.log"
# GSM modem
group = smsc
smsc = at
smsc-id=N70
modemtype = nokiaphone
device = /dev/ttyACM0
speed = 460800
#pin =2345
group = modems
id = nokiaphone
name = "Nokia Phone"
detect-string = "Nokia N70"
#detect-string2 =
init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
#enable-hwhs =
# fake smsc
group = smsc
smsc = fake
port = 10000
connect-allow-ip = 127.0.0.1
group = smsbox
bearerbox-host = localhost
sendsms-port = 13131
sendsms-chars = "0123456789 "
global-sender = 123456
access-log = "kannel.access"
log-file = "smsbox.log"
log-level = 0
group = sms-service
keyword = nop
text = "You asked nothing and I did it!"
catch-all = true
group = sms-service
#keyword =
keyword-regex = .*
catch-all = yes
get-url =
"http://192.168.0.92:8080/KannelSmsReceiver/msgRecvd.htm?sender=%p&text=%s-%
r"
accept-x-kannel-headers = true
max-messages = 0
#concatenation = true
group = sms-service
keyword = default
text = "No action specified"
group = sendsms-user
username = username
password = password
**********************************************
I want kannel to receive the sms and send it to url given above
"http://192.168.0.92:8080/KannelSmsReceiver/msgRecvd.htm?sender=%p&text=%s-%
r"
Rgds,
Pratik
--
Emmanuel
CHANSON Emmanuel
Mobile Nouvelle-CalΞΉdonie: +687.77.35.02
Mobile France: +33 (0) 6.68.03.89.56
@email : [email protected]
