Many thanks Nikos and good to hear that it works. I've configured DLR callback with Clickatell (system-type = clickatell) having the smsc variable set to http. This is configured as a separate SMSC and I have no problem with processing DLR.
I've configure a HUAWEI E618 Mobile Connect - 3G Modem and can send SMS messages using HTTP Push service. In my current configuration I do not see the dlr-url to be called, when I use the GSM modem, which works when message is routed via clickatell. Do I need to make any specific configuration for the GSM modem smsc in order for the delivery status reports to be processed? Kind Regards, Gjergji 2010/8/28 Nikos Balkanas <[email protected]> > Yes, and it works. Note that using a GSM modem is more reliable than a > phone. Some providers do not send DLRs to a phone. > > But what do you mean by http SMSc? A GSM modem is different than an HTTP > smsc. > > BR, > Nikos > ----- Original Message ----- From: Gjergji Guri > To: [email protected] > Sent: Saturday, August 28, 2010 10:39 AM > Subject: Getting DLR reports for AT SMSC > > > > Hi, > > I have no problem to get DLR report for http SMSC by setting the correct > dlr-mask and dlr-url. Nevertheless, though my modem driver and network > support receiving delivery reports the bearerbox do not process any delivery > reports. > > At page 64 of the User Guide (Feature checklist) or Table 6-2. SMSC driver > features I can see that for AT driver the “Can Use DLR” is set to N. > Nevertheless, N is set even for http request where the delivery is working > fine in my configuration. > > Do I need to setup some specific processing for the incoming SMS delivery > reports retrieved by the AT modem? > > Has anyone configured delivery reports with Kannel using a modem (AT SMSC > driver)? > > Any hint, guidance? > > Cheers, > Gjergji >
