Hi,
Please download latest svn. It should work.
BR,
Nikos
----- Original Message -----
From: Jonathan Zylberberg
To: [email protected]
Sent: Tuesday, August 31, 2010 1:48 AM
Subject: Meta data parameters in kannel 1.4.3 on RedHat release 5.5
Greetings,
I was hoping to get some help from someone who experienced this same issue
about the meta-data parameters in kannel version 1.4.3.
Our SMS gateway is requiring us to pass a new parameter called "program-id"
to them. From the Kannel documentation, it seems like I need to add a new
parameter in the meta-data.
So I add that to the kannel.conf file, which then looks like this: (I
removed the sensitive info from it).
# MT test bind
group = smsc
smsc = smpp
smsc-id = test_outbound
allowed-smsc-id = test_outbound
preferred-smsc-id = test_outbound
host = 123.123.123.123
port = 12557
transceiver-mode = off
interface-version = 34
smsc-username = theusername
smsc-password = thepassword
system-type = ""
address-range = ""
source-addr-ton = 1
source-addr-npi = 1
group = smpp-tlv
name = tlv_test
tag = 0x2157
length = 6
smsc-id = test_outbound
type = octetstring
Then I start kannel in debug mode and I obtain this:
sudo /usr/local/sbin/bearerbox -v 0 /etc/kannel/kannel.conf
2010-08-30 15:36:00 [19574] [0] INFO: Debug_lvl = 0, log_file = <none>,
log_lvl = 0
2010-08-30 15:36:00 [19574] [0] ERROR: Group 'smpp-tlv' is no valid group
identifier.
2010-08-30 15:36:00 [19574] [0] ERROR: Error found on line 219 of file
`/etc/kannel/kannel.conf'.
2010-08-30 15:36:00 [19574] [0] PANIC: Couldn't read configuration from
`/etc/kannel/kannel.conf'.
2010-08-30 15:36:01 [19574] [0] PANIC:
/usr/local/sbin/bearerbox(gw_panic+0x15b) [0x4770db]
2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox(main+0xa47)
[0x40d027]
2010-08-30 15:36:01 [19574] [0] PANIC:
/lib64/libc.so.6(__libc_start_main+0xf4) [0x3f30e1d994]
2010-08-30 15:36:01 [19574] [0] PANIC: /usr/local/sbin/bearerbox [0x40bab9]
It seems strange that the error refers to the group "smpp-tlv" not being
valid, since the documentation says it should be
(http://www.kannel.org/download/kannel-userguide-snapshot/userguide.html#META-DATA)
For more info, I am running kannel 1.4.3, (gateway-1.4.3) compiled from
source.
Operating system is Red Hat Enterprise Linux Server release 5.5 (Tikanga)
(x86_64)
And when I run the "yum" command to find out about the libxml version, this
is what I obtain.
libxml2.x86_64 2.6.26-2.1.2.8
libxml2-devel.x86_64 2.6.26-2.1.2.8 installed
libxml2-python.x86_64 2.6.26-2.1.2.8
Any help will be highly appreciated.
Thanks in advance,
Jonathan
This e-mail message, including any attachments, from Verrus Mobile
Technologies Inc. or Verrus UK Limited (collectively, "Verrus") is
confidential and for the personal use of the recipient(s) identified above.
This message may also be legally privileged. If it is not intended for you,
do not disclose, copy or distribute the message but delete it immediately
and notify the sender by e-mail or telephone +1 866 783 7787 or +44 1453
760000 (UK).
Any views or opinions expressed in this message are those of the author and
not necessarily those of Verrus. The message shall not form part of any
legally binding contract or obligation.
Verrus electronic communication systems are monitored without user consent
to: investigate or to detect unauthorized use; prevent or detect crime;
establish the existence of facts relevant to Verrus; or ascertain compliance
with regulatory practices relevant to the business of Verrus.
This e-mail has been scanned for viruses by a third party e-mail management
provider. Verrus cannot accept liability for any damage which you may suffer
as a result of virus infection. We recommend that you carry out your own
virus checks before opening any attachment.
