Hi,
I remember replying to you again.
1) No, it is not normal to close and open connections every time you have to
send an SMS. In fact it wastes a lot of resources (sockets and CPU). Talk to
VF, it is their issue.
2) Type:
netstat -a | grep <vodafone-ip> | wc -l
when having a problem. See if you are running low on sockets. See in what
state they are left. If they are not closing sockets properly talk again to
VF. In linux you can increase limit in ulimit.conf. In solaris use ndi. This
(limits) is not a kannel issue but an OS one.
Finally if they don't clean up their act, try to restart kannel every 24 hrs
from cron.
I hope i don't have to reply again about the same thing.
BR,
Nikos
----- Original Message -----
From: Bogdan Irimia
To: [email protected]
Sent: Monday, September 06, 2010 12:06 PM
Subject: Issue with UCP - reconnection problem
Hello
I'm reposting this same issue: I have a problem with the UCP connection:
- during "normal" operation, I get these messages every 10 minutes:
2010-08-30 15:57:09 [2280] [7] DEBUG: EMI2[vodafone-8878]: clear_sent called
2010-08-30 15:57:09 [2280] [7] INFO: EMI2[vodafone-8878]: connecting to
Primary SMSC
I suppose this is because the SMSC closes connection after 10 minutes of
inactivity (according to Vodafone, with whom we are testing). I configured
the account with keepalive = 50 but no improvement. But I am able to send
and receive messages normally.
- after a while (2 or 3 days) I get these messages in the log:
2010-08-30 16:07:41 [2280] [7] INFO: EMI2[vodafone-8878]: connecting to
Primary SMSC
2010-08-30 16:08:02 [2280] [7] ERROR: connect failed
2010-08-30 16:08:02 [2280] [7] ERROR: System error 110: Connection timed out
2010-08-30 16:08:02 [2280] [7] ERROR: error connecting to server
`217.10.194.192' at port `6001'
2010-08-30 16:08:02 [2280] [7] ERROR: EMI2[vodafone-8878]: opening TCP
connection to 217.10.194.192 failed
2010-08-30 16:08:02 [2280] [7] ERROR: EMI2[vodafone-8878]: Couldn't connect
to SMS center (retrying in 10 seconds).
During these messages, the port is in this state (using netstat):
tcp 0 1 93.113.15.3:2878 217.10.194.192:x11-1 SYN_SENT
Also, with Wireshark I noticed that Kannel sends SYN packet to server port,
the server returns SYN ACK, but Kannel does not return ACK. Thus, the
connection isn't made successful.
So there are two questions:
- is it true that an UCP client should only connect when sending a message?
during inactivity, connection can be closed, and any incoming messages could
be received using receive-port?
- why does Kannel fails to reconnect after a while, due to failing in
sending ACK message back to connecting port?
Thank you!
