Hi, I have a T610. Can I know how did you pair it to work with Ubuntu? I just installed Ubuntu and setup playSMS, Kannel...
Do i need to install additional drivers for my phone? When I first connected my phone, BEFORE Kannel & playSMS installation, and ran "wvdialconf" it showed my Device. But after the installation, it identified nothing... WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. I think this is because currently it is being used... Any ideas? Please Share your experience on how you connected your T610 Thanks in advance When i typed "wvdialconf" to identify my phone (connected via USB Data cable) it identified Alvaro Cornejo wrote: > > Hi Russel > > The CNMI command tells modem how to react to message events. Depending > on your phone capabilities, you should configure CNMI > > Google for sony ericsson AT command reference for your phone and you > should get the correct values, also depending on what your needs are. > > This is the config I use for some sony phones: > > group = modems > id = K510a > name = K510a > detect-string = "K510" > init-string = "AT+CNMI=2,3,0,1,0;+CMEE=1" > message-storage = ME > # PARA TEST: > keepalive-cmd = AT+CSQ > reset-string = AT+CFUN=1 > > group = modems > id = T610 > name = T610 > detect-string = "T610" > init-string = "AT+CNMI=2,3,0,0,0;+CMEE=1" > message-storage = ME > # PARA TEST > > group = modems > id = T68 > name = T68 > detect-string = "T68" > init-string = "AT+CNMI=3,1,2,0,0;+CMEE=1" > message-storage = ME > keepalive-cmd = AT+CBC;+CSQ > reset-string = AT+CFUN=1 > > > > > -- View this message in context: http://old.nabble.com/Sony-Ericsson-w910i-as-smsc-modem-tp19731342p29805775.html Sent from the Kannel - User mailing list archive at Nabble.com.
