Yes. You should also configure system-type = my-smsc.
If still having problems, post detailed smppbox logs with failed connection
attempt.
BR,
Nikos
----- Original Message -----
From: Peter Mohr
To: Rene Kluwen ; [email protected]
Cc: [email protected]
Sent: Wednesday, September 29, 2010 12:33 PM
Subject: RE: Inbound SMPP connection to Kannel? How to?
At the other end I’ve specified ”meme” as smsc-username and ”password” as
smsc-password isn’t that correct??
Thanks
Peter
_________________________
Peter Mohr
Partner
Mobile: +45 3162 1290
Mobility Architects
www.mobilityarchitects.com
Mobility Architects hjζlper nogle af Danmarks stψrste organisationer og
virksomheder med at udnytte potentialet i mobil teknologi. Vi har en
kreativ, visionζr og forretningsfokuseret tilgang til at lψse vores kunders
problemer. Resultatet er driftsikre, skalerbare og brugervenlige lψsninger.
Vi har Danmarks fψrende Afaria-kompetencer og tilbyder desuden: Mobil
strategi og forretningsrεdgivning, design af mobil infrastruktur og
sikkerhed, rεdgivning om udvikling af mobile lψsninger, implementering af
device management lψsninger samt support og uddannelse.
From: Peter Mohr
Sent: 24. september 2010 17:22
To: Peter Mohr; Rene Kluwen; [email protected]
Cc: [email protected]
Subject: RE: Inbound SMPP connection to Kannel? How to?
I keep getting this at the other end (also Kannel):
SMSC rejected last commandcode 0x0000000e (Invalid Password).
Obvious this has to do with my “clients” file:
demo demo remote
meme password my-smsc
.conf file:
group = core
group = smppbox
bearerbox-host = localhost
bearerbox-port = 13001
smppbox-id = smppbox1
smppbox-port = 9000
log-level = 0
log-file = /var/log/kannel/smppbox.log
our-system-id = MA_Kannel
smpp-logins = /etc/smppbox/clients
Now, I’ve read through the www.chimit.nl/kannel/userguide.pdf several times,
but I simply don’t get it…
Any suggestions as to what I should look at?
Thanks
\Peter
_________________________
Peter Mohr
Partner
Mobile: +45 3162 1290
Mobility Architects
www.mobilityarchitects.com
Mobility Architects hjζlper nogle af Danmarks stψrste organisationer og
virksomheder med at udnytte potentialet i mobil teknologi. Vi har en
kreativ, visionζr og forretningsfokuseret tilgang til at lψse vores kunders
problemer. Resultatet er driftsikre, skalerbare og brugervenlige lψsninger.
Vi har Danmarks fψrende Afaria-kompetencer og tilbyder desuden: Mobil
strategi og forretningsrεdgivning, design af mobil infrastruktur og
sikkerhed, rεdgivning om udvikling af mobile lψsninger, implementering af
device management lψsninger samt support og uddannelse.
From: [email protected] [mailto:[email protected]] On Behalf
Of Peter Mohr
Sent: 1. september 2010 15:34
To: Rene Kluwen; [email protected]
Cc: [email protected]
Subject: RE: Inbound SMPP connection to Kannel? How to?
Thanks.
I’ll dig deeper into that.
\Peter
_________________________
Peter Mohr
Partner
Mobile: +45 3162 1290
Mobility Architects
www.mobilityarchitects.com
Mobility Architects hjζlper nogle af Danmarks stψrste organisationer og
virksomheder med at udnytte potentialet i mobil teknologi. Vi har en
kreativ, visionζr og forretningsfokuseret tilgang til at lψse vores kunders
problemer. Resultatet er driftsikre, skalerbare og brugervenlige lψsninger.
Vi har Danmarks fψrende Afaria-kompetencer og tilbyder desuden: Mobil
strategi og forretningsrεdgivning, design af mobil infrastruktur og
sikkerhed, rεdgivning om udvikling af mobile lψsninger, implementering af
device management lψsninger samt support og uddannelse.
From: Rene Kluwen [mailto:[email protected]]
Sent: 1. september 2010 15:08
To: Peter Mohr; [email protected]
Cc: [email protected]
Subject: RE: Inbound SMPP connection to Kannel? How to?
For incoming SMPP traffic, see www.chimit.nl/kannel/userguide.pdf
== Rene
From: [email protected] [mailto:[email protected]] On Behalf
Of Peter Mohr
Sent: Wednesday, 01 September, 2010 14:34
To: [email protected]
Cc: [email protected]
Subject: RE: Inbound SMPP connection to Kannel? How to?
Sorry, i don’t get that. I guess I must specify username/password + port
that can listen for incoming SMPP traffic but how is that related to the
keywords and sms-service group ?
_________________________
Peter Mohr
Partner
Mobile: +45 3162 1290
Mobility Architects
www.mobilityarchitects.com
Mobility Architects hjζlper nogle af Danmarks stψrste organisationer og
virksomheder med at udnytte potentialet i mobil teknologi. Vi har en
kreativ, visionζr og forretningsfokuseret tilgang til at lψse vores kunders
problemer. Resultatet er driftsikre, skalerbare og brugervenlige lψsninger.
Vi har Danmarks fψrende Afaria-kompetencer og tilbyder desuden: Mobil
strategi og forretningsrεdgivning, design af mobil infrastruktur og
sikkerhed, rεdgivning om udvikling af mobile lψsninger, implementering af
device management lψsninger samt support og uddannelse.
From: [email protected] [mailto:[email protected]]
Sent: 1. september 2010 14:30
To: Peter Mohr
Cc: [email protected]
Subject: Re: Inbound SMPP connection to Kannel? How to?
group = sms-service
keyword = nop
text = "You asked nothing and I did it!"
group = sms-service
keyword = hitme
text = "Aint hitting on girls..."
# There should be always a 'default' service. This service is used when no
# other 'sms-service' is applied.
group = sms-service
keyword = default
text = "No service specified"
Incoming traffic is controlled by these parameters. You need to define URLs
to your localhost/any other server to route traffic.
On Wed, Sep 1, 2010 at 5:26 PM, Peter Mohr <[email protected]>
wrote:
Currently it uses AT/Modem to send messages but I’m looking for inbound
SMPP….
#---------------------------------------------
# CORE
#
# There is only one core group and it sets all basic settings
# of the bearerbox (and system). You should take extra notes on
# configuration variables like 'store-file' (or 'store-dir'),
# 'admin-allow-ip' and 'access.log'
group = core
admin-port = 13000
smsbox-port = 13001
admin-password = bar
#status-password = foo
#admin-deny-ip = ""
#admin-allow-ip = ""
#log-file = "/tmp/kannel.log"
#log-level = 0
box-deny-ip = "*.*.*.*"
box-allow-ip = "127.0.0.1"
#unified-prefix = "+358,00358,0;+,00"
#access-log = "/tmp/access.log"
#store-file = "kannel.store"
#ssl-server-cert-file = "cert.pem"
#ssl-server-key-file = "key.pem"
#ssl-certkey-file = "mycertandprivkeyfile.pem"
#---------------------------------------------
# SMSC CONNECTIONS
#
# SMSC connections are created in bearerbox and they handle SMSC specific
# protocol and message relying. You need these to actually receive and send
# messages to handset, but can use GSM modems as virtual SMSCs
# This is a fake smsc connection, _only_ used to test the system and
services.
# It really cannot relay messages to actual handsets!
group = smsc
smsc = fake
smsc-id = FAKE
port = 10000
connect-allow-ip = 127.0.0.1
group = smsc
#smsc = at
smsc = smpp
modemtype = auto
device=/dev/ttyS0
my-number = "+4520330358"
connect-allow-ip = 127.0.0.1
log-level = 0
#speed = 115200
sms-center = "+4540390999"
group = modems
id = siemens_tc35
name = "Siemens TC35"
detect-string = "SIEMENS"
detect-string2 = "TC35"
init-string = "AT+CNMI=1,2,0,1,1"
speed = 19200
enable-hwhs = "AT\\Q3"
need-sleep = true
#---------------------------------------------
# SMSBOX SETUP
#
# Smsbox(es) do higher-level SMS handling after they have been received from
# SMS centers by bearerbox, or before they are given to bearerbox for
delivery
group = smsbox
bearerbox-host = 127.0.0.1
sendsms-port = 13013
global-sender = +4520330358
#sendsms-chars = "0123456789 +-"
log-file = "/tmp/smsbox.log"
log-level = 1
#access-log = "/tmp/access.log"
#---------------------------------------------
# SEND-SMS USERS
#
# These users are used when Kannel smsbox sendsms interface is used to
# send PUSH sms messages, i.e. calling URL like
#
http://kannel.machine:13013/cgi-bin/sendsms?username=tester&password=foobar...
group = sendsms-user
username = playsms
password = *************
#user-deny-ip = ""
#user-allow-ip = ""
#---------------------------------------------
# SERVICES
#
# These are 'responses' to sms PULL messages, i.e. messages arriving from
# handsets. The response is based on message content. Only one sms-service
is
# applied, using the first one to match.
group = sms-service
keyword = nop
text = "You asked nothing and I did it!"
group = sms-service
keyword = hitme
text = "Aint hitting on girls..."
# There should be always a 'default' service. This service is used when no
# other 'sms-service' is applied.
group = sms-service
keyword = default
text = "No service specified"
_________________________
Peter Mohr
Partner
Mobile: +45 3162 1290
Mobility Architects
www.mobilityarchitects.com
Mobility Architects hjζlper nogle af Danmarks stψrste organisationer og
virksomheder med at udnytte potentialet i mobil teknologi. Vi har en
kreativ, visionζr og forretningsfokuseret tilgang til at lψse vores kunders
problemer. Resultatet er driftsikre, skalerbare og brugervenlige lψsninger.
Vi har Danmarks fψrende Afaria-kompetencer og tilbyder desuden: Mobil
strategi og forretningsrεdgivning, design af mobil infrastruktur og
sikkerhed, rεdgivning om udvikling af mobile lψsninger, implementering af
device management lψsninger samt support og uddannelse.
From: [email protected] [mailto:[email protected]]
Sent: 1. september 2010 14:25
To: Peter Mohr
Cc: [email protected]
Subject: Re: Inbound SMPP connection to Kannel? How to?
Please post the config file.
2010/9/1 Peter Mohr <[email protected]>
Hi
Can anyone help set up inbound SMPP connections on my Kannel system? I can’t
figure out how. Outbound works like a charm J
Thanks
Peter
_________________________
Peter Mohr
Partner
Mobile: +45 3162 1290
Mobility Architects
www.mobilityarchitects.com
Mobility Architects hjζlper nogle af Danmarks stψrste organisationer og
virksomheder med at udnytte potentialet i mobil teknologi. Vi har en
kreativ, visionζr og forretningsfokuseret tilgang til at lψse vores kunders
problemer. Resultatet er driftsikre, skalerbare og brugervenlige lψsninger.
Vi har Danmarks fψrende Afaria-kompetencer og tilbyder desuden: Mobil
strategi og forretningsrεdgivning, design af mobil infrastruktur og
sikkerhed, rεdgivning om udvikling af mobile lψsninger, implementering af
device management lψsninger samt support og uddannelse.
