Hi,
2 issues:
1) Seems that your modem doesn't support the IFC command. Read UG about
enable-hwhs. Not critical.
2) Test your SIM with a mobile. If OK read UG about no-pin.
BR,
Nikos
----- Original Message -----
From: "Alex" <[email protected]>
To: "Nikos Balkanas" <[email protected]>
Cc: "Alvaro Cornejo" <[email protected]>; "kannel users"
<[email protected]>
Sent: Tuesday, October 05, 2010 2:10 PM
Subject: Re: Using Fusion 220 on Kannel
Hi I have managed to get the init string using wvidial but i still get
this error in the log. Does any one know what could be the problem?
2010-10-05 14:07:57 [2007] [6] INFO: AT2[FUSION]: opening device
2010-10-05 14:07:57 [2007] [6] DEBUG: AT2[FUSION]: device opened.
Telnet mode = 0
2010-10-05 14:07:58 [2007] [6] DEBUG: AT2[FUSION]: device opened
2010-10-05 14:07:58 [2007] [6] INFO: AT2[FUSION]: Logging in
2010-10-05 14:07:59 [2007] [6] INFO: AT2[FUSION]: init device
2010-10-05 14:07:59 [2007] [6] INFO: AT2[FUSION]: speed set to 460800
2010-10-05 14:07:59 [2007] [6] DEBUG: AT2[FUSION]: --> ATZ^M
2010-10-05 14:07:59 [2007] [6] DEBUG: AT2[FUSION]: <-- OK
2010-10-05 14:07:59 [2007] [6] DEBUG: AT2[FUSION]: --> AT^M
2010-10-05 14:07:59 [2007] [6] DEBUG: AT2[FUSION]: <-- AT
2010-10-05 14:07:59 [2007] [6] DEBUG: AT2[FUSION]: <-- OK
2010-10-05 14:07:59 [2007] [6] DEBUG: AT2[FUSION]: --> AT&F^M
2010-10-05 14:08:00 [2007] [6] DEBUG: AT2[FUSION]: <-- AT&F
2010-10-05 14:08:00 [2007] [6] DEBUG: AT2[FUSION]: <-- OK
2010-10-05 14:08:00 [2007] [6] DEBUG: AT2[FUSION]: --> ATE0^M
2010-10-05 14:08:00 [2007] [6] DEBUG: AT2[FUSION]: <-- ATE0
2010-10-05 14:08:00 [2007] [6] DEBUG: AT2[FUSION]: <-- OK
2010-10-05 14:08:00 [2007] [6] DEBUG: AT2[FUSION]: --> AT+IFC=2,2^M
2010-10-05 14:08:00 [2007] [6] DEBUG: AT2[FUSION]: <-- ERROR
2010-10-05 14:08:00 [2007] [6] ERROR: AT2[FUSION]: Generic error: ERROR
2010-10-05 14:08:00 [2007] [6] INFO: AT2[FUSION]: cannot enable
hardware handshake
2010-10-05 14:08:00 [2007] [6] DEBUG: AT2[FUSION]: --> AT+CPIN?^M
2010-10-05 14:08:00 [2007] [6] DEBUG: AT2[FUSION]: <-- ERROR
2010-10-05 14:08:00 [2007] [6] ERROR: AT2[FUSION]: Generic error: ERROR
2010-10-05 14:08:00 [2007] [6] ERROR: AT2[FUSION]: Initialization of
device failed.
2010-10-05 14:08:00 [2007] [6] INFO: AT2[FUSION]: Closing device
2010-10-05 14:08:00 [2007] [6] ERROR: AT2[FUSION]: Couldn't connect
(retrying in 10 seconds).
On 05/10/2010, Nikos Balkanas <[email protected]> wrote:
Use wvdial. Read UG about it. Or trial & error from other examples in
modems.conf.
BR,
Nikos
----- Original Message -----
From: Alex
To: Nikos Balkanas
Cc: Alvaro Cornejo ; kannel users
Sent: Tuesday, October 05, 2010 9:55 AM
Subject: Re: Using Fusion 220 on Kannel
Hi
I have tried to set the varibles with no success.
My config file reads
# MODEMS
group = modems
id = USB\Vid_114f&Pid_1234&Rev_0000
name = "FUSSION"
detect-string = "WAVECOM"
init-string = "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
#message-start = 0
message-storage = "SM"
need-sleep = true
sendline-sleep =200
speed = 9600
#MODEM acts as smsc
group = smsc
smsc = at
modemtype = auto
device = /dev/ttyS5
smsc-id = Fussion
sim-buffering = true
keepalive = 5
speed = 9600
Plus how do i get the init string?
Thanks a lot
2010/10/4 Nikos Balkanas <[email protected]>
There are some other variables in group "modems" that might help:
need-sleep, sendline-sleep. Read UG about them.
BR,
Nikos
----- Original Message ----- From: "Alvaro Cornejo"
<[email protected]>
To: "Alex" <[email protected]>
Cc: "kannel users" <[email protected]>
Sent: Monday, October 04, 2010 5:49 PM
Subject: Re: Using Fusion 220 on Kannel
Don't know the fuson modem but you can set the keep-alive config for
your modem. Check guide for details
|-----------------------------------------------------------------------------------------------------------------|
Env�½e y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Per� , M�Ήxico y en mas de 180 paises. Use aplicaciones 2 vias
via
SMS y GPRS online
Visitenos en www.perusms.NET www.smsglobal.com.mx y
www.pravcom.com
On Mon, Oct 4, 2010 at 8:42 AM, Alex <[email protected]> wrote:
I have been running kannel on a Huawei modem that worked perfect. I had a
request from a client to use a wavecom Fussion 220 modem. I set it up and
everything was working perfect. I however that unlike the Huawei modems,
it
goes to sleep and kannel has to try and reconnect to it all the time. What
could be the problem?
--
Best regards,
Alex
--
Best regards,
Alex
--
Best regards,
Alex
