Thanks Nikos, I succeed finally to complete my purpose (send SMS to an smpp client and receive from it) by using fakesmsc and smsbox-route to route SMS to opensmppbox, for DLRs I will work without them. opensmppbox can route sms to fakesmsc with route-smsc parameter. It is for load testing. With fakesms I can control throuput whereas with smsbox cgi script I need to use loopback and for the moment it does not work for incoming SMS coming from smppclient.
And for AO-AT (send and receive by using 2 smpp client and loopback smsc I will do more tests using allowed-smsc as you advise, to check if it works. Emmanuel 2010/10/12 Nikos Balkanas <nbalka...@gmail.com> > Sorry, missed the other part of your question. I see it creating the > dlr_entry, however, it is not doing anything with it. If you want DLRs you > should go with http smsc and system kannel. > > BR, > Nikos > ----- Original Message ----- From: "Nikos Balkanas" <nbalka...@gmail.com> > To: "Emmanuel CHANSON" <emmanuelchan...@gmail.com>; "users" < > users@kannel.org> > Sent: Tuesday, October 12, 2010 10:48 AM > > Subject: Re: smsbox to opensmppbox routing > > > Hi, >> >> To force SMS delivery to desired smsc you have to use allowed-smsc-id in >> each one to only itself. >> >> BR, >> Nikos >> ----- Original Message ----- From: Emmanuel CHANSON >> To: Nikos Balkanas ; users >> Sent: Tuesday, October 12, 2010 7:10 AM >> Subject: Re: smsbox to opensmppbox routing >> >> >> One more question, >> >> Is loopback SMS able to handle DLRs ? >> I dont see anything about this in user guide. >> I made test and DLRs are not sent to smsbox in order to trigg DLR-URL >> >> Emmanuel >> >> >> 2010/10/12 Emmanuel CHANSON <emmanuelchan...@gmail.com> >> >> Ok here I got a problem, >> >> For understanding below the purpose and test conditions: >> Purpose of the test: I need to send SMS from smsbox cgi script to 1 smpp >> application. >> For this I have smsbox <---> sqlbox (not mandatory here) <---> bearerbox >> >> I have configured 2 smscs: >> >> group = smsc >> smsc = loopback >> smsc-id = loop1 >> >> group = smsc >> smsc = loopback >> smsc-id = loop2 >> >> and 2 smsbox-route associated where all SMS from loop1 are fwd to >> smppclient1=mmg: >> second route if when smppclient1 answer back to my cgi script >> >> group = smsbox-route >> smsbox-id = sqlbox-mo >> smsc-id = loop2 >> >> >> group = smsbox-route >> smsbox-id = mmg >> >> smsc-id = loop1 >> >> Then I have connected to bearerbox an opensmppbox with 1 SMPP application >> with a route to loop2 when application will answer back to my SMS sent from >> the CGI script. >> >> bearerbox <---> opensmppbox <---> smpp_client1 >> >> group = opensmppbox >> opensmppbox-id = smppbox >> opensmppbox-port = 6201 >> >> bearerbox-host = localhost >> bearerbox-port = 13001 >> log-level = 0 >> log-file = /var/log/kannel/opensmppbox.log >> our-system-id = opensmppbox >> >> route-to-smsc = loop2 >> >> smpp-logins = "/etc/kannel/smpplogins.txt" >> >> >> smsbox.conf: >> -------------------- >> group = sendsms-user >> username = xxx >> password = xxx >> #user-deny-ip = "" >> #user-allow-ip = "" >> default-smsc = loop1 >> #forced-smsc = loop1 >> max-messages = 4 >> concatenation = true >> >> CGI script -> smsbox -> sqlbox -> bearerbox -> loop1 -> bearerbox -> >> opensmppbox -> smppclient1 >> then smppclient1 make an action it send back a SMS >> smppclient1 --> opensmppbox --> bearerbox --> loop2 --> bearerbox --> >> sqlbox --> smsbox >> >> But I got a problem at the begining, >> >> about smsc routing, Just after smsbox & sqlbox, I see bearerbox forwarding >> SMS either to smsc loop1 or smsc loop2 ramdomly although I have specified in >> url the value &smsc=loop1 to inject sms only to loop1 in order to trigg >> opensmppbox . >> >> Where is the problem ? Is it a bug ? >> >> I made a test with 2 fakesmsc only connected to bearerbox, calling smsbox >> cgi script it works well when invoking &smsc=fake1 or &smsc=fake2 but if I >> add or use only loop smsc, bearerbox start to send sms randomly to loop 1 or >> others smscs. >> >> Logs with 2 tests done one after the other through sendsms script with >> &smsc=loop1 that should forward to mmg smpp client and not send back to to >> sqlbox, 1 is nok, 2 is ok but this is not normal. >> >> bearerbox.log: >> ... >> 2010-10-12 11:38:35 [9021] [18] DEBUG: boxc_receiver: sms received >> 2010-10-12 11:38:35 [9021] [15] DEBUG: send_msg: sending msg to boxc: >> <sqlbox-mo> >> 2010-10-12 11:38:35 [9021] [15] DEBUG: boxc_sender: sent message to >> <127.0.0.1> >> 2010-10-12 11:38:35 [9021] [14] DEBUG: boxc_receiver: got ack >> 2010-10-12 11:38:35 [9021] [18] DEBUG: send_msg: sending msg to box: >> <127.0.0.1> >> >> 2010-10-12 11:38:49 [9021] [18] DEBUG: boxc_receiver: sms received >> 2010-10-12 11:38:49 [9021] [21] DEBUG: send_msg: sending msg to boxc: >> <mmg> >> 2010-10-12 11:38:49 [9021] [21] DEBUG: boxc_sender: sent message to >> <127.0.0.1> >> 2010-10-12 11:38:49 [9021] [18] DEBUG: send_msg: sending msg to box: >> <127.0.0.1> >> 2010-10-12 11:38:49 [9021] [24] ERROR: BOXC: Got ack for nonexistend >> message! >> 2010-10-12 11:38:49 [9021] [24] DEBUG: Msg object at 0xb5600b38: >> 2010-10-12 11:38:49 [9021] [24] DEBUG: type: ack >> 2010-10-12 11:38:49 [9021] [24] DEBUG: ack.nack: 0 >> 2010-10-12 11:38:49 [9021] [24] DEBUG: ack.time: 1286843929 >> 2010-10-12 11:38:49 [9021] [24] DEBUG: ack.id: >> 8634c78a-7f2e-403a-b1d6-02c717bb753a >> 2010-10-12 11:38:49 [9021] [24] DEBUG: Msg object ends. >> 2010-10-12 11:38:49 [9021] [24] DEBUG: boxc_receiver: got ack >> >> >> Regards, >> >> Emmanuel >> >> >> 2010/10/12 Nikos Balkanas <nbalka...@gmail.com> >> >> >> Yeap. It behaves like any other smsc. Just use different smsc-ids. >> >> >> BR, >> Nikos >> ----- Original Message ----- From: Emmanuel CHANSON >> To: Nikos Balkanas >> Cc: users >> >> Sent: Tuesday, October 12, 2010 1:07 AM >> >> Subject: Re: smsbox to opensmppbox routing >> >> >> It seems to work very well and even if I use smsbox (cgi script) SMS is >> forwarded to opensmppbox using smsbox-route, bearerbox does not send back to >> the originated box. >> >> One question is it possible to create 2 smsc loopback ? in order to be >> able to send SMS from >> Application 1 -> Application 2 using loopback smsc 1 and smsbox-route 1 >> and also >> Application 2 -> Application 1 using loopback smsc 2 and smsbox-route 2 >> >> Emmanuel >> >> >> 2010/10/11 Nikos Balkanas <nbalka...@gmail.com> >> >> Nope. I am not talking about either solution. I am describing a new >> approach. You will need 1 bb and 1 smppbox. Connect both apps to smppbox, >> and smppbox to bearerbox. Then send to loopback smsc or http smsc for MT2MO >> redirection. Specify with an smsbox-route rule that all incoming MO from >> looopback smsc should go to AT smsbox. >> >> >> BR, >> Nikos >> ----- Original Message ----- From: Emmanuel CHANSON >> >> To: Nikos Balkanas >> Cc: users@kannel.org >> Sent: Monday, October 11, 2010 1:46 PM >> >> Subject: Re: smsbox to opensmppbox routing >> >> >> To clarify about the solution to use 2 BB is it possible? >> I don't understand in your last mail if you talk about fancy way or normal >> way, or if it is not possible at all to do AO-AT routing :s >> >> Regards, >> >> Emmanuel >> >> >> 2010/10/11 Nikos Balkanas <nbalka...@gmail.com> >> >> Nope. BB is an SMPP client and can send only to an SMPP server. If your >> applications are clients, you cannot connect to them with bb. SMPPbox cannot >> help you either, because it cannot route between 2 SMPP clients. >> >> You may be able to connect both applications to SMPPbox and then use >> either the loopback smsc or the http smsc (system kannel) to force a >> loopback on bb. However I am not sure how you will do the routing from one >> application to the other (smsbox in this case). You see, loopback and http >> smsc send back only to the originating smsbox. >> >> >> BR, >> Nikos >> ----- Original Message ----- From: Emmanuel CHANSON >> >> To: users@kannel.org >> Sent: Monday, October 11, 2010 11:21 AM >> >> Subject: Re: smsbox to opensmppbox routing >> >> >> Understood... so I need a second bearerbox to do AO-AT ie Application >> Originated (smpp client 1) -> Application terminated (smpp client 2) >> I tought smppbox could forward from one client to another but it can not, >> it forward all SMS to bearerbox that routes SMS. >> >> Thanks, >> >> Emmanuel >> >> >> 2010/10/11 Nikos Balkanas <nbalka...@gmail.com> >> >> (Please use list) >> >> I don't understand AO-AT. You can get infinite loop if you use careless >> routing: >> >> smsbox -> bb -> SMSc >> smppbox-> ->smppbox >> >> If you just want to send SMS to SMSc, you don't need smppbox. If you route >> SMS to smppbox, and smppbox connects to same bb, it will feed again the SMS >> to the bb, which in turn can feed it again to smppbox, and so on. >> >> >> BR, >> Nikos >> ----- Original Message ----- From: Emmanuel CHANSON >> To: Nikos Balkanas >> >> Sent: Monday, October 11, 2010 10:24 AM >> >> Subject: Re: smsbox to opensmppbox routing >> >> >> So if I want to do AO-AT routing using one bearerbox I can not. This is my >> purpose. >> Here I would like to use smsbox cgi script to send SMS but let's say I >> want to send SMS from one application to another, both will be connected to >> opensmppbox but in this case I will need the fancy solution.but you said it >> will end p to infinite loop wy ? >> >> Otherwise have to connect second bearerbox. >> >> Emmanuel >> >> >> 2010/10/11 Nikos Balkanas <nbalka...@gmail.com> >> >> Normal way would be to use 2 bbs. Fancy way would be to use a single one, >> but for what purpose? You would end up with an infinite loop. The idea is to >> be able to connect transparently other SMPP clients to your infrastructure >> and appear as another aggregator. >> >> BR, >> >> Nikos >> ----- Original Message ----- From: Emmanuel CHANSON >> >> To: Nikos Balkanas >> Cc: users >> Sent: Monday, October 11, 2010 10:00 AM >> Subject: Re: smsbox to opensmppbox routing >> >> >> >> Ok I understand a little more, >> >> Is it relevant if I use only one bearerbox and configure this bearerbox to >> be a client, to connect to smppbox using smsc = smpp ? Then add a routing ? >> Or do I have to use 2 differents bearerbox for this like you advise? >> >> Emmanuel >> >> >> 2010/10/11 Nikos Balkanas <nbalka...@gmail.com> >> >> Hi, >> >> You cannot use it that way. openSMPPbox is an SMPP proxy. It connects to >> bearerbox as another smsbox, but it cannot connect to directly to smsbox. >> You can connect an SMPP client (ie ESME - another bearerbox) to it, and it >> will forward SMS to bearerbox for routing to an smsc. >> >> HTH, >> Nikos >> ----- Original Message ----- From: Emmanuel CHANSON >> To: users >> Sent: Monday, October 11, 2010 8:34 AM >> Subject: smsbox to opensmppbox routing >> >> >> >> Hello, >> >> I am just discovering opensmppbox (latest svn release compiled and >> installed with kannel & sqlbox svn) >> >> My purpose is to send SMS to an smpp application for tests. >> For this I want to use smsbox cgi script but I got a problem of routing >> from bearerbox. >> >> How can I route these SMS from smsbox to opensmppbox (itself linked to a >> smpp application), do I have to use smsbox-route ? >> >> Below my config and logs: >> >> bearerbox.log: >> ... >> 2010-10-11 16:24:48 [27991] [17] DEBUG: boxc_receiver: sms received >> 2010-10-11 16:24:48 [27991] [17] WARNING: Cannot find SMSCConn for message >> to <1065>, rejected. >> 2010-10-11 16:24:48 [27991] [17] WARNING: Message rejected by bearerbox, >> no router! >> 2010-10-11 16:24:48 [27991] [17] DEBUG: send_msg: sending msg to box: >> <127.0.0.1> >> >> kannel.conf: >> ----------------- >> group = core >> admin-port = 13000 >> admin-password = xxx >> status-password = xxx >> #admin-deny-ip = "" >> #admin-allow-ip = "" >> log-file = "/var/log/kannel/bearerbox.log" >> log-level = 0 >> access-log = "/var/log/kannel/access.log" >> #http-proxy-host = "127.0.0.1" >> #http-proxy-port = 8080 >> #http-proxy-exceptions = "127.0.0.1" >> #http-proxy-username = "user" >> #http-proxy-password = "password" >> #ssl-certkey-file = "mycertandprivkeyfile.pem" >> #store-type = file >> store-type = spool >> #store-location = /var/log/kannel/kannel.store >> store-location = /var/spool/kannel >> dlr-storage = mysql >> #black-list = "http://127.0.0.1/kannel/black-list.txt"; >> white-list-regex = ^\+xxx[0-9]{6}$ >> # >> # Smsbox related >> # Sqlbox at that moment >> smsbox-port = 13001 >> # >> # Wapbox related >> wapbox-port = 13002 >> #udp-deny-ip = "*.*.*.*" >> udp-allow-ip = "127.0.0.1" >> #wdp-interface-name = "*" >> >> #################################### >> # Wapbox >> group = wapbox >> bearerbox-host = localhost >> log-file = "/var/log/kannel/wapbox.log" >> log-level = 0 >> syslog-level = none >> >> #################################### >> # PPG >> group = ppg >> #ppg-url = /wappush >> ppg-url = /kannel/php-admin/wappush.php >> ppg-port = 8080 >> concurrent-pushes = 100 >> users = 1024 >> ppg-allow-ip = "127.0.0.1" >> trusted-pi = true >> service-name = ppg1 >> >> group = wap-push-user >> wap-push-user = wappush >> ppg-username = xxx >> ppg-password = xxx >> allow-ip = "127.0.0.1" >> >> #################################### >> # SMSC CONNECTIONS - GLOBAL FIELDS >> >> # SMSC Fake >> group = smsc >> smsc = fake >> smsc-id = "FakeSMSC-1" >> allowed-smsc-id = "FakeSMSC-1" >> host = localhost >> port = 10001 >> connect-allow-ip = 127.0.0.1 >> >> >> ############################# >> # DLR with MySQL support configuration >> group = mysql-connection >> id = mydlr >> host = localhost >> username = xxxx >> password = xxxxxx >> database = kanneldlr >> # max count of connections that will be opened for dbpool >> # default is 1 >> max-connections = 1 >> >> # MySQL Group >> group = dlr-db >> id = mydlr >> table = dlr >> field-smsc = smsc >> field-timestamp = ts >> field-destination = destination >> field-source = source >> field-service = service >> field-url = url >> field-mask = mask >> field-status = status >> field-boxc-id = boxc >> >> ############################# >> # SMSBOX SETUP >> # NOT USED >> group = smsbox >> bearerbox-host = localhost >> sendsms-port = 13013 >> #sendsms-chars = "0123456789 +-" >> global-sender = +xxxxxxxxx >> log-file = "/var/log/kannel/smsbox.log" >> log-level = 0 >> access-log = "/var/log/kannel/access.log" >> #white-list = >> #black-list = >> #reply-couldnotfetch = >> #reply-couldnotrepresent = >> #reply-requestfailed = >> #reply-emptymessage = >> >> ############################# >> group = smsbox-route >> smsbox-id = mmg >> >> >> >> >> opensmppbox.conf: >> ----------------------------- >> # sample opensmppbox.conf >> >> group = core >> dlr-storage = mysql >> >> # this group defines your opensmppbox >> group = opensmppbox >> # our boxc type >> opensmppbox-id = smppbox >> # the port to listen on for smpp connections >> opensmppbox-port = 6201 >> # we connect to the following host as a box >> bearerbox-host = localhost >> bearerbox-port = 13001 >> log-level = 0 >> log-file = /var/log/kannel/opensmppbox.log >> our-system-id = opensmppbox >> #route-to-smsc = smpp >> # see sample smpplogins.txt >> smpp-logins = "/etc/kannel/smpplogins.txt" >> >> # the following is just standard dlr configuration >> >> group = mysql-connection >> id = mydlr >> host = localhost >> username = xxxx >> password = xxxxxx >> database = kanneldlr >> # you can increase this upon a higher load >> max-connections = 1 >> >> group = dlr-db >> id = mydlr >> table = dlr >> field-smsc = smsc >> field-timestamp = ts >> field-destination = destination >> field-source = source >> field-service = service >> field-url = url >> field-mask = mask >> field-status = status >> field-boxc-id = boxcid >> >> opensmpplogin.txt: >> --------------------------- >> mmg mmg mmg >> >> Regards, >> >> Emmanuel >> > >
