Hi All,
My operator provided me 3 Tx 3Rx sessions and using load-balancing too
with out specifying allow-smsc-id deny-smsc-id.
On 10/30/2010 15:22, XEN-Housing s.r.o. wrote:
I'll be glad to see sollution too if its possible, coz i was trying
year later to make that kind of load balance.
Dňa 30. 10. 2010 11:26, [email protected] wrote /
napísal(a):
That's not correct. DLR matching is done using the smsc-id, "ts"
(which is the unique I'd for the message received from the carrier)
and in some cases the destination number.
You can use different binds as long as they have the same smsc-id
(you wouldn't be able to load-balance otherwise).
I suspect your having trouble with the I'd format, please post a
submit_sm pdu log and the corresponding dlr error. I bet one I'd is
in hex, and the other is dec.
Regards,
Alex
BlackBerry de movistar, allí donde estés está tu oficin@
-----Original Message-----
From: "XEN-Housing s.r.o."<[email protected]>
Sender: [email protected]
Date: Sat, 30 Oct 2010 11:16:54
To: Kiran Reddy<[email protected]>
Cc:<[email protected]>
Subject: Re: Error in DLRS
Hello Kiran,
thans not about same username password, host port or smsc-id in config.
U can not use 2 connection defined such that to get it working. In
kannel u can manage smpp "sessions" with defining modes: transmitter,
reciever or transciever. But DLR that was sent by one session of kannel
(bind) can not be processed by other kannel session (bind) that did not
produced MT to which that MO belonges.
there is nothing to help with. that's the way it works.
I even can not emagine, why u want to have one smsc for sending sms and
other for recieving dlrs.
Slavoj.
Dňa 30. 10. 2010 11:07, Kiran Reddy wrote / napísal(a):
Hi,
I am using same username and password and host and port for Tx as well
Rx.
In this case from tx submit will happen and from Rx Dlr receiving will
happens. Even if smsc-id same in Rx and Tx also it is happening same.
Please help me.
On 10/30/2010 14:29, XEN-Housing s.r.o. wrote:
Hello,
I think that u are using one box (connection, group = smsc) for
sending sms and other (that one from config) for recieving DLR. Am I
right?
If yes, U can not. Because if kannel get DLR, it need to be known,
and expected for kannel. When kannel sending sms, ir create record in
DLR storage and when some DLR came, it will compare that DLR, if its
expected, if it came from expected smsc-id and so. and if not, u got
error in log such this one is.
Slavoj.
Dňa 30. 10. 2010 10:25, Kiran Reddy wrote / napísal(a):
Dear All,
I am using kanel 1.4.3 and problem is i am getting error while
getting DLR's. Due to this i am loosing all delivery reports.
And my configuration for Rx connection is
group = smsc
smsc = smpp
smsc-id = xxxxx
host= xxx.xxx.xxx.xxx
receive-port = xxx
source-addr-autodetect = yes
dest-addr-ton = 1
source-addr-ton = 5
dest-addr-npi = 1
source-addr-npi = 9
system-type = xxxxx
smsc-username = xxxx
smsc-password = xxxxx
address-range = ""
reconnect-delay = 2
alt-charset = 1
enquire-link-interval = 30
msg-id-type = 0x00
interface-version = 33
010-10-30 13:52:16 [10535] [7] ERROR: SMPP[xxx-xxx_Rx2]: got DLR but
could not find message or was not interested in it id<159748406>
dst<xxxxxxxxxxxx>, type<1>
Please some one help me.
Regards,
Kiran Reddy
