Hi Nikos, Here is my conf file for the SMPP conn
# # XXX SMPP Connection Configurations # group=smsc smsc=smpp smsc-id=XXX allowed-smsc-id=XXX preferred-smsc-id=XXX log-file="/storage01/instance01/log/xxx01.log" log-level=0 reconnect-delay=5 max-sms-octets=140 # # SMPP Specific Variables # host=10.20.20.101 port=31110 # 0x02 - just carry on waiting (given that the wait-ack should never expire this is the must accurate) # A message is resent if the acknowledge from SMSC takes more than this time. Defaults to 60 seconds. transceiver-mode=true receive-port=0 smsc-username=****** smsc-password=****** system-type=SMPP service-type=1 interface-version="34" enquire-link-interval=58 source-addr-ton=0 source-addr-npi=5 source-addr-autodetect=no dest-addr-ton=1 dest-addr-npi=1 bind-addr-ton=1 bind-addr-npi=1 msg-id-type=0 connection-timeout=300 validityperiod=1440 I have also another 2 files with the same configurations, with only a difference in the log file, so total are three connections with the same smsc-id Thanks in advance :) Best Regards, Mohammed M I Sleem http://www.abusleem.net http://www.freakle.com - The Search Freak http://www.colorle.com - color your Google search 2010/11/27 Nikos Balkanas <[email protected]> > Hi, > > Please post your configuration. > > BR, > Nikos > ----- Original Message ----- From: Mohammed Saleem > To: [email protected] > Sent: Saturday, November 27, 2010 7:15 PM > Subject: Not ACKed message ! > > > > > Dear Kannelers > > I had a not ACKed MT > > 2010-11-27 13:03:35 [6563] [17] WARNING: SMPP[SMSCID_XX]: Not ACKED message > found, will retransmit. SENT<103>sec. ago, SEQ<124720>, > Β DST<+xxxxxxxxxxxx> > > > > I know this is normal, but I have 2 questions: > > (1) How can I know the reason why the message wan't ACKed? > > (2) How can I prevent bb from resending the MT? I have configured the SMSC > connection to connect/reconnect when a message is not ACKed: > > # wait-ack-expire: Defines what kind of action should be taken if the ack > of a message expires. The options for this value are: > # 0x00 - disconnect/reconnect (default)Β > > # 0x01 - as is now, re-queue, but this could potentially result in the msg > arriving twice > # 0x02 - just carry on waiting (given that the wait-ack should never expire > this is the must accurate) > > I haven't configured the wait-ack-expire so the default action is to > connect/reconnect, I am not sure if this variables covers my case > > NOTE: sometimes when I get this WARNING another WARNING follows it tells > that the SMPP is sending wring sequence number > NOTE: I have balanced connection (3 connections) configured in kannel that > have the same smsc-id > > > Any opinion would be highly appreciated, thanks > > > > > > > > Best Regards, > Mohammed M I Sleem > http://www.abusleem.net > > http://www.freakle.com - The Search Freak > > http://www.colorle.com - color your Google search >
