Thanks,
Paul From: Alejandro Guerrieri [mailto:[email protected]] Sent: Wednesday, December 15, 2010 4:58 PM To: Paul Harrison Cc: [email protected] Subject: Re: Kannel Yes, and you can access any TLV's mblox might send (assuming you defined them on your config of course) by using the %D parameter. I'm glad it helped :) Regards, Alex On Wed, Dec 15, 2010 at 10:12 PM, Paul Harrison <[email protected]> wrote: I got with mblox and it works now. Thank you so much! Real quick, messages coming from handset to kannel. This will stay the same correct? I can still use the below information in my smskannel.conf ? post-url = http://172.16.94.111/sms_response_parent.html?body=%a <http://172.16.94.111/sms_response_parent.html?body=%25a&opid=%25m&time=%25t &MSISDN=%25p&recipient=%25P&cing=%25F> &opid=%m&time=%t&MSISDN=%p&recipient=%P&cing=%F Paul From: Alejandro Guerrieri [mailto:[email protected]] Sent: Wednesday, December 15, 2010 2:28 PM To: Paul Harrison Cc: [email protected] Subject: Re: Kannel Glad it helped :) I don't believe the warning has nothing to do with the problem. Ask mblox again, you might be missing some other parameter or sending the wrong values. Regards, Alex On Wed, Dec 15, 2010 at 9:14 PM, Paul Harrison <[email protected]> wrote: WOW, that was is it.. It works! One other issue. If I pass the service id and program then it fails. http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar <http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar&smsc=psms&to=151 23334444&username=tester&from=54322&text=hello+from+local&meta-data=%3Fsmpp% 3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26330%26MBprogram%3Dstd rt> &smsc=psms&to=15123334444&username=tester&from=54322&text=hello+from+local&m eta-data=%3Fsmpp%3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26330% 26MBprogram%3Dstdrt 2010-12-15 15:08:50 [865] [3] INFO: sendsms sender:<tester:54322> (192.168.1.116) to:<15123334444> msg:<hello from local> 2010-12-15 15:08:50 [851] [7] WARNING: SMPP: PDU NULL terminated string (message_id) has no NULL. 2010-12-15 15:08:50 [851] [7] ERROR: SMPP[psms]: SMSC returned error code 0x0000042a (Vendor-specific error, please refer to your SMPP provider) in response to submit_sm. 2010-12-15 15:08:50 send-SMS request added - sender:tester:54322 192.168.1.116 target:15123334444 request: 'hello from local' 2010-12-15 15:08:50 FAILED Send SMS [SMSC:psms] [SVC:tester] [ACT:] [BINF:] [FID:] [META:?smpp?MBoperator=31003&MBbilling=0&MBserviceId=26330&MBprogram=stdrt] [from:54322] [to:15123334444] [flags:-1:0:-1:-1:-1] [msg:16:hello from local] [udh:0: Any idea why? Thanks, Paul From: Alejandro Guerrieri [mailto:[email protected]] Sent: Wednesday, December 15, 2010 1:58 PM To: Paul Harrison Cc: [email protected] Subject: Re: Kannel [FID:] [META:?smpp-tlv?MBoperator=3... Ah! You're using "smpp-tlv", change it for "smpp": ?smpp?MBoperator... The smpp-tlv groups seems to be fine, change that and tell me how it goes. Regards, Alex On Wed, Dec 15, 2010 at 8:39 PM, Paul Harrison <[email protected]> wrote: Smskannel.conf file: http://www.curesport.com/smskannel.conf kannel.conf file: http://www.curesport.com/kannel.conf In the smskannel.conf. I defined the mblox parameters(smpp-tlv). From: Alejandro Guerrieri [mailto:[email protected]] Sent: Wednesday, December 15, 2010 1:22 PM To: Paul Harrison Cc: [email protected] Subject: Re: Kannel Hrm, the meta-data seems to be all there. Can you post your smpp-tlv groups? Regards, Alex On Wed, Dec 15, 2010 at 8:02 PM, Paul Harrison <[email protected]> wrote: http://www.curesport.com/smsbox.log http://www.curesport.com/kannel_access_log.txt http://www.curesport.com/stdout.txt Please let me know if you need anything else. Thank You, Paul From: Alejandro Guerrieri [mailto:[email protected]] Sent: Wednesday, December 15, 2010 12:09 PM To: Paul Harrison Cc: [email protected] Subject: Re: Kannel Can you provide log entries showing the submit_sm PDU and surroundings? Regards, Alex On Wed, Dec 15, 2010 at 6:50 PM, Paul Harrison <[email protected]> wrote: I have been picking at this for a few days now. I have no clue why I keep getting that error as I'm passing the meta data in the request. From: [email protected] [mailto:[email protected]] On Behalf Of Paul Harrison Sent: Wednesday, December 15, 2010 10:38 AM To: 'Alejandro Guerrieri' Cc: [email protected] Subject: RE: Kannel I read the UG on that. I'm passing the meta-data but I still get the error from the below email in red. http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar <http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar&smsc=psms&to=151 23334444&username=tester&from=54322&text=hello+from+local&meta-data=%3Fsmpp- tlv%3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26330%26MBprogram%3 Dstdrt> &smsc=psms&to=15123334444&username=tester&from=12345&text=hello+from+local&m eta-data=%3Fsmpp-tlv%3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26 330%26MBprogram%3Dstdrt Any help is greatly appreciated. From: Alejandro Guerrieri [mailto:[email protected]] Sent: Wednesday, December 15, 2010 10:35 AM To: Paul Harrison Cc: Abdul Basit; [email protected] Subject: Re: Kannel You need to configure those parameters as meta-data, and pass them on the request. Read the meta-data section on the UG for the details. Regards, Alex On Wed, Dec 15, 2010 at 5:26 PM, Paul Harrison <[email protected]> wrote: I get the following error: 2010-12-15 10:56:34 [30493] [7] WARNING: SMPP: PDU NULL terminated string (message_id) has no NULL. 2010-12-15 10:56:34 [30493] [7] ERROR: SMPP[psms]: SMSC returned error code 0x0000042a (Vendor-specific error, please refer to your SMPP provider) in response to submit_sm. I talked to mblox and they said I'm not passing the operator and billing information to them. I doubt they are getting the MBserviceid and MBProgram either. Mblox now requires the tag program=>stdrt. How do I fix this? UG? Thanks, Paul From: Abdul Basit [mailto:[email protected]] Sent: Wednesday, December 15, 2010 10:15 AM To: Paul Harrison Cc: [email protected] Subject: Re: Kannel Good. keep on reading UG. On Wed, Dec 15, 2010 at 9:10 PM, Paul Harrison <[email protected]> wrote: I start kannel using the following code. /usr/local/sbin/bearerbox -v 1 --pid-file /var/run/kannel.pid /usr/local/etc/smskannel.conf & sleep 5 /usr/local/sbin/smsbox -v 1 /usr/local/etc/smskannel.conf & Thanks, Paul From: Paul Harrison [mailto:[email protected]] Sent: Wednesday, December 15, 2010 10:02 AM To: [email protected] Subject: Kannel Hi Team, I downloaded Kannel using the following options. SVN access to source code... svn co https://svn.kannel.org/ <https://svn.kannel.org/%3cproject%3e/trunk> <project>/trunk Smskannel.conf file: http://www.curesport.com/smskannel.conf kannel.conf file: http://www.curesport.com/kannel.conf In the smskannel.conf. I defined the mblox parameters. url I'm using: http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar <http://192.168.1.103:13013/cgi-bin/sendsms?password=foobar&smsc=psms&to=151 23334444&username=tester&from=54322&text=hello+from+local&meta-data=%3Fsmpp- tlv%3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26330%26MBprogram%3 Dstdrt> &smsc=psms&to=15123334444&username=tester&from=12345&text=hello+from+local&m eta-data=%3Fsmpp-tlv%3FMBoperator%3D31003%26MBbilling%3D0%26MBserviceId%3D26 330%26MBprogram%3Dstdrt When I invoke the above url. I get the below error message : [r...@node01 etc]# 2010-12-15 10:56:34 [30507] [3] INFO: smsbox: Got HTTP request </cgi-bin/sendsms> from <192.168.1.116> 2010-12-15 10:56:34 [30507] [3] INFO: sendsms used by <tester> 2010-12-15 10:56:34 [30507] [3] INFO: sendsms sender:<tester:53985> (192.168.1.116) to:<15126366987> msg:<hello from local> 2010-12-15 10:56:34 [30493] [7] WARNING: SMPP: PDU NULL terminated string (message_id) has no NULL. 2010-12-15 10:56:34 [30493] [7] ERROR: SMPP[psms]: SMSC returned error code 0x0000042a (Vendor-specific error, please refer to your SMPP provider) in response to submit_sm. I talked to mblox and they said I'm not passing the operator and billing information to them. I doubt they are getting the MBserviceid and MBProgram either. Mblox now requires the tag program=>stdrt. Can someone please help me? It would be greatly appreciated. Thanks, Paul -- Regards, Abdul Basit | +92 32 1416 4196 | +92 30 0841 1445
