If you don't need smsbox, you might just as well not start it. However, as far as I remember you do need to group = smsbox in your kannel.conf or else bearerbox won't start.
About your other question: I don't know, maybe somebody else does. == Rene > > Ok. Well, in my tests bearerbox can store the messages and send it later > when > the esme is connected again. I hope i'm not bothering you too much, but i > have one more question. It's something i noticed, maybe is a concept about > opensmppbox that i'm not aware. It's like this: i have my smpp server with > bearerbox initiated and opensmppbox initiated, if the esme is down, > bearerbox stores the messages sent to the esme, and send it later when the > esme is up. But if i start smsbox in my smpp server with bearerbox and > opensmppbox when the esme is down, than bearerbox doesn't store the > messages, it just send request failed to the subscriber. So, if i only use > it as a smppbox server, do i need smsbox or not? And why if smsbox is > started it won't store the messages? Well, i really apreciated all your > help > you've given me. > Best regards > Denilson > > > Nikos Balkanas wrote: >> >> You can always check kannel's web site under authors. There you can find >> 2 >> mails for Stipe. I am sure he won't mind you getting in touch with him. >> >> BR, >> Nikos >> ----- Original Message ----- >> From: "Denilson Silva" <[email protected]> >> To: <[email protected]> >> Sent: Thursday, May 26, 2011 6:30 PM >> Subject: Re: Route sms to different ESME's >> >> >>> >>> Ok. I would like to know how can i contact Stipe? I tried once some >>> time >>> ago >>> to know about his commercial version with no success, because i could >>> be >>> interested in the commercial version. Well, Thanks a lot. >>> >>> Denilson >>> >>> >>> Nikos Balkanas wrote: >>>> >>>> Hi, >>>> >>>> Opensmppbox doesn't have permanent storage, so it can't store SMS. >>>> There >>>> is >>>> a commercial version by Stipe that does that. Having said that, your >>>> SMS >>>> will be stored in bb's storage, until the ESME comes back on line. >>>> This >>>> will >>>> work most of the time, but I am not sure if it is 100% reliable, >>>> though, >>>> openssmppbox have had some issues with its ACKs in the past. >>>> >>>> BR, >>>> Nikos >>>> ----- Original Message ----- >>>> From: "Denilson Silva" <[email protected]> >>>> To: <[email protected]> >>>> Sent: Thursday, May 26, 2011 4:36 PM >>>> Subject: Re: Route sms to different ESME's >>>> >>>> >>>>> >>>>> Hi, thanks for the response. It works with smsbox-route. There is >>>>> another >>>>> question i have, i don't know if i should make another thread. Well, >>>>> here >>>>> it >>>>> is: does opensmppbox support storing messages destined to an esme if >>>>> this >>>>> esme is offline, and send it later to this esme when it's connected? >>>>> How >>>>> can >>>>> it be done? Or do i have to create a solution for this kind of >>>>> situation? >>>>> Thanks. >>>>> >>>>> Denilson >>>>> >>>>> >>>>> Nikos Balkanas wrote: >>>>>> >>>>>> Hi, >>>>>> >>>>>> Yes you should. You are talking about MOs. There is no reason you >>>>>> shouldn't >>>>>> be able to do it, but I have never tried it. Read about group >>>>>> smsbox-route >>>>>> in UG. >>>>>> >>>>>> BR, >>>>>> Nikos >>>>>> ----- Original Message ----- >>>>>> From: "Denilson Silva" <[email protected]> >>>>>> To: <[email protected]> >>>>>> Sent: Tuesday, May 17, 2011 9:07 PM >>>>>> Subject: Route sms to different ESME's >>>>>> >>>>>> >>>>>>> >>>>>>> Greetings to all. I would be very thankfull if i can have an >>>>>>> information. >>>>>>> I >>>>>>> woukd like to know if there is a way of routing SMS's from >>>>>>> subscribers >>>>>>> to >>>>>>> an >>>>>>> ESME client with opensmppbox or kannel. For example, i am connected >>>>>>> with >>>>>>> two >>>>>>> different ESME's, and if a subscriber send an SMS to a number >>>>>>> configured >>>>>>> in >>>>>>> my SMSC, then i route it to ESME 1, if it is to other number i >>>>>>> route >>>>>>> it >>>>>>> to >>>>>>> ESME 2. What i can do now is connect an ESME to my opensmppbox >>>>>>> which >>>>>>> is >>>>>>> connected to bearerbox->SMSC. >>>>>>> Hope i explained well. >>>>>>> Thank you in advance. >>>>>>> Denilson Silva >>>>>>> -- >>>>>>> View this message in context: >>>>>>> http://old.nabble.com/Route-sms-to-different-ESME%27s-tp31640431p31640431.html >>>>>>> Sent from the Kannel - User mailing list archive at Nabble.com. >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> -- >>>>> View this message in context: >>>>> http://old.nabble.com/Route-sms-to-different-ESME%27s-tp31640431p31708102.html >>>>> Sent from the Kannel - User mailing list archive at Nabble.com. >>>>> >>>>> >>>> >>>> >>>> >>>> >>> >>> -- >>> View this message in context: >>> http://old.nabble.com/Route-sms-to-different-ESME%27s-tp31640431p31709160.html >>> Sent from the Kannel - User mailing list archive at Nabble.com. >>> >>> >> >> >> >> > > -- > View this message in context: > http://old.nabble.com/Route-sms-to-different-ESME%27s-tp31640431p31711287.html > Sent from the Kannel - User mailing list archive at Nabble.com. > > > >
